Download or read book Enabling Technologies for Petaflops Computing written by Thomas Lawrence Sterling and published by MIT Press. This book was released on 1995 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapters focus on four interrelated areas: applications and algorithms, device technology, architecture and systems, and software technology. Building a computer ten times more powerful than all the networked computing capability in the United States is the subject of this book by leading figures in the high performance computing community. It summarizes the near-term initiatives, including the technical and policy agendas for what could be a twenty-year effort to build a petaFLOP scale computer. (A FLOP -- Floating Point OPeration -- is a standard measure of computer performance and a PetaFLOP computer would perform a million billion of these operations per second.) Chapters focus on four interrelated areas: applications and algorithms, device technology, architecture and systems, and software technology. While a petaFLOPS machine is beyond anything within contemporary experience, early research into petaFLOPS system design and methodologies is essential to U.S. leadership in all facets of computing into the next century. The findings reported here explore new and fertile ground. Among them: construction of an effective petaFLOPS computing system will be feasible in two decades, although effectiveness and applicability will depend on dramatic cost reductions as well as innovative approaches to system software and programming methodologies; a mix of technologies such as semiconductors, optics, and possibly cryogenics will be required; and while no fundamental paradigm shift in system architecture is expected, active latency management will be essential, requiring a high degree of fine-grain parallelism and the mechanisms to exploit it. Scientific and Engineering Computation series.
Download or read book High Performance Computing written by Jesus Labarta and published by Springer. This book was released on 2008-01-19 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed joint post-conference proceedings of the 6th International Symposium on High-Performance Computing, ISHPC 2005, held in, Japan, in 2005. It also includes the refereed post-proceedings of the First International Workshop on Advanced Low Power Systems 2006, ALPS2006, and some from the Workshop on Applications for PetaFLOPS Computing, APC 2005. A total of 42 papers were carefully selected from 76 submissions, covering a huge range of topics.
Download or read book Insights written by and published by . This book was released on with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Aerosciences in the 21st Century written by Manuel D. Salas and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last decade, the role of computational simulations in all aspects of aerospace design has steadily increased. However, despite the many advances, the time required for computations is far too long. This book examines new ideas and methodologies that may, in the next twenty years, revolutionize scientific computing. The book specifically looks at trends in algorithm research, human computer interface, network-based computing, surface modeling and grid generation and computer hardware and architecture. The book provides a good overview of the current state-of-the-art and provides guidelines for future research directions. The book is intended for computational scientists active in the field and program managers making strategic research decisions.
Download or read book Advances in Superconductivity XII written by T. Yamashita and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 12th International Symposium on Superconductivity was held in Morioka, Japan, October 17-19, 1999. Convened annually since 1988, the symposium covers the whole field of superconductivity from fundamental physics and chemistry to a variety of applications. At the 12th Symposium, a mini-symposium focusing on the two-dimensionality of high-temperature superconductors, or the c-axis transport, and a session on vortex physics were organized. There were also many reports on the recent developments of YBCO-based coated conductors both in the United States and in Japan, AC losses of wires and tapes, developments of bulk materials with strong flux pinning, the recent progress in thin film and junction technologies, and the demonstration of various electronics applications using SQUIDs, microwave devices, and single-flux-quantum (SFQ) digital devices. This volume is a valuable resource for all those working in the field of superconductivity.
Download or read book High Performance Computing Systems and Applications written by Jonathan Schaeffer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major advances in computing are occurring at an ever-increasing pace. This is especially so in the area of high performance computing (HPC), where today's supercomputer is tomorrow's workstation. High Performance Computing Systems and Applications is a record of HPCS'98, the 12th annual Symposium on High Performance Computing Systems and Applications. The quality of the conference was significantly enhanced by the high proportion of keynote and invited speakers. This book presents the latest research in HPC architecture, networking, applications and tools. Of special note are the sections on computational biology and physics. High Performance Computing Systems and Applications is suitable as a secondary text for a graduate-level course on computer architecture and networking, and as a reference for researchers and practitioners in industry.
Download or read book Green IT Technologies and Applications written by Jae H. Kim and published by Springer Science & Business Media. This book was released on 2011-07-25 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of its kind in presenting comprehensive technical issues and solutions for rapidly growing Green IT. It brings together in a single volume both green communications and green computing under the theme of Green IT, and presents exciting research and developments taking place therein in a survey style. Written by the subject matter experts consisting of an international team of recognized researchers and practitioners in the field, Green IT: Technologies and Applications will serve as an excellent source of information on the latest technical trend of Green IT for graduate/undergraduate students, researchers, engineers, and engineering managers in the IT (Electrical, Communications, Computer Engineering, Computer Science, Information Science) as well as interdisciplinary areas such as sustainability, environment, and energy. The book comprises three parts: Green Communications, Green Computing, and Smart Grid and Applications. Part I Green Communications deals with energy efficient architectures and associated performance measures in wireless communications. It covers energy issues in PHY, MAC, Routing, Application layers and their solutions for a variety of networks. Part II Green Computing deals with various energy issues in data centers, computing clusters, computing storage, and associated optimization techniques. Energy management strategies are presented to balance between energy efficiency and required qualities of services. Part III Smart Grid and Applications presents an overview and research challenges for smart grid. Applications include modeling of urban pollutant for transportation networks, Wireless Sensor Network (WSN) architecture with long range radio, and Green IT standards.
Download or read book Computer aided Design of High temperature Materials written by Alexander Pechenik and published by Topics in Physical Chemistry. This book was released on 1999 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature materials is a fast-moving research area with numerous practical applications. Materials that can withstand extremely high temperatures and extreme environments are generating considerable attention worldwide; however, designing materials that have low densities, elevated melting temperatures, oxidation resistance, creep resistance, and intrinsic toughness encompass some of the most challenging problems in materials science. The current search for high-temperature materials is largely based on traditional, trial-and-error experimental methods which are costly and time-consuming. An effective way to accelerate research in this field is to use recent advances in materials simulations and high performance computing and communications (HPCC) to guide experiments. This synergy between experiment and advanced materials modeling will significantly enhance the synthesis of novel high-temperature materials. This volume collects recent work from experimental and computational scientists on high-temperature materials and emphasizes the potential for collaboration. It features state-of-the-art materials modeling and recent experimental developments in high-temperature materials. Topics include fundamental phenomena and properties; measurements and modeling of interfacial phenomena, stresses, growth of defects, strain, and fracture; and electronic structure and molecular dynamics.
Download or read book High Performance Computing written by Constantine Polychronopoulos and published by Springer Science & Business Media. This book was released on 1999-05-12 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Symposium on High-Performance Computing, ISHPC'99, held in Kyoto, Japan in May 1999. The 23 revised full papers presented were carefully selected from a total of 61 submissions. Also included are the abstracts of several invited talks and 12 reviewed short papers corresponding to the poster presentations given at the symposium. The papers address many current issues in high-performance computing and communication, regarding hardware and network architectures as well as regarding software and theoretical foundations; also advanced applications are studied in a variety of fields including modeling, visualisation, and computational science.
Download or read book Beowulf Cluster Computing with Windows written by Thomas Sterling and published by MIT Press. This book was released on 2001-10-26 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive guides to the latest Beowulf tools and methodologies. Beowulf clusters, which exploit mass-market PC hardware and software in conjunction with cost-effective commercial network technology, are becoming the platform for many scientific, engineering, and commercial applications. With growing popularity has come growing complexity. Addressing that complexity, Beowulf Cluster Computing with Linux and Beowulf Cluster Computing with Windows provide system users and administrators with the tools they need to run the most advanced Beowulf clusters. The book is appearing in both Linux and Windows versions in order to reach the entire PC cluster community, which is divided into two distinct camps according to the node operating system. Each book consists of three stand-alone parts. The first provides an introduction to the underlying hardware technology, assembly, and configuration. The second part offers a detailed presentation of the major parallel programming librairies. The third, and largest, part describes software infrastructures and tools for managing cluster resources. This includes some of the most popular of the software packages available for distributed task scheduling, as well as tools for monitoring and administering system resources and user accounts. Approximately 75% of the material in the two books is shared, with the other 25% pertaining to the specific operating system. Most of the chapters include text specific to the operating system. The Linux volume includes a discussion of parallel file systems.
Download or read book Beowulf Cluster Computing with Linux written by Thomas Lawrence Sterling and published by MIT Press. This book was released on 2002 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enabling technologies - An overview of cluster computing / Thomas Sterling / - Node Hardware / Thomas Sterling / - Linux / Peter H. Beckman / - Network Hardware / Thomas Sterling / - Network Software / Thomas Sterling / - Setting Up clusters : installation and configuration - How fast is my beowulf? / David Bailey / - Parallel programming / - Parallel programming with MPI / William Gropp / - Advanced topics in MPI programming / William Gropp / - Parallel programming with PVM / Al Geist / - Fault-tolerant and adaptive programs with PVM / Al Geist / - Managing clusters / - Cluster workload management / James Patton Jones / - Condor : a distributed job scheduler / - Maui scheduler : A multifunction cluster scheduler / David B. Jackson / - PBS : portable batch system / James Patton Jones / - PVFS : parallel virtual file system / Walt Ligon / - Chiba city : the Argonne scalable cluster.
Download or read book Industrial Applications of High Performance Computing written by Anwar Osseyran and published by CRC Press. This book was released on 2015-04-01 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Applications of High-Performance Computing: Best Global Practices offers a global overview of high-performance computing (HPC) for industrial applications, along with a discussion of software challenges, business models, access models (e.g., cloud computing), public-private partnerships, simulation and modeling, visualization, big data a
Download or read book Unmatched written by David Barkai and published by CRC Press. This book was released on 2023-10-16 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmatched: 50 Years of Supercomputing: A Personal Journey Accompanying the Evolution of a Powerful Tool The rapid and extraordinary progress of supercomputing over the past half-century is a powerful demonstration of our relentless drive to understand and shape the world around us. In this book, David Barkai offers a unique and compelling account of this remarkable technological journey, drawing from his own rich experiences working at the forefront of high-performance computing (HPC). This book is a journey delineated as five decade-long ‘epochs’ defined by the systems’ architectural themes: vector processors, multi-processors, microprocessors, clusters, and accelerators and cloud computing. The final part examines key issues of HPC and discusses where it might be headed. A central goal of this book is to show how computing power has been applied, and, more importantly, how it has impacted and benefitted society. To this end, the use of HPC is illustrated in a range of industries and applications, from weather and climate modeling to engineering and life sciences. As such, this book appeals to both students and general readers with an interest in HPC, as well as industry professionals looking to revolutionize their practice.
Download or read book Computerworld written by and published by . This book was released on 1994-07-18 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 40 years, Computerworld has been the leading source of technology news and information for IT influencers worldwide. Computerworld's award-winning Web site (Computerworld.com), twice-monthly publication, focused conference series and custom research form the hub of the world's largest global IT media network.
Download or read book Network Based Parallel Computing Communication Architecture and Applications written by Anand Sivasubramaniam and published by Springer. This book was released on 2006-12-29 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clusters of workstations/PCs connected by o?-the-shelf networks have become popular as a platform for cost-e?ective parallel computing. Hardware and so- ware technological advances have made this network-based parallel computing platform feasible. A large number of research groups from academia and industry are working to enhance the capabilities of such a platform, thereby improving its cost-e?ectiveness and usability. These developments are facilitating the mig- tion of many existing applications as well as the development of new applications on this platform. Continuing in the tradition of the two previously successful workshops, this 3rd Workshop on Communication, Architecture and Applications for Netwo- based Parallel Computing (CANPC’99) has brought together researchers and practitioners working in architecture, system software, applications and perf- mance evaluation to discuss state-of-the-art solutions for network-based parallel computing systems. This workshop has become an excellent forum for timely dissemination of ideas and healthy interaction on topics at the cutting edge in cluster computing technology. Each submitted paper underwent a rigorous review process, and was assigned to at least 3 reviewers, including at least 2 program committee members. Each paper received at least 2 reviews, most received 3 and some even had 4 reviews.
Download or read book Quantum Computing Without Magic written by Zdzislaw Meglicki and published by MIT Press. This book was released on 2008-08-01 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: How quantum computing is really done: a primer for future quantum device engineers. This text offers an introduction to quantum computing, with a special emphasis on basic quantum physics, experiment, and quantum devices. Unlike many other texts, which tend to emphasize algorithms, Quantum Computing Without Magic explains the requisite quantum physics in some depth, and then explains the devices themselves. It is a book for readers who, having already encountered quantum algorithms, may ask, “Yes, I can see how the algebra does the trick, but how can we actually do it?” By explaining the details in the context of the topics covered, this book strips the subject of the “magic” with which it is so often cloaked. Quantum Computing Without Magic covers the essential probability calculus; the qubit, its physics, manipulation and measurement, and how it can be implemented using superconducting electronics; quaternions and density operator formalism; unitary formalism and its application to Berry phase manipulation; the biqubit, the mysteries of entanglement, nonlocality, separability, biqubit classification, and the Schroedinger's Cat paradox; the controlled-NOT gate, its applications and implementations; and classical analogs of quantum devices and quantum processes. Quantum Computing Without Magic can be used as a complementary text for physics and electronic engineering undergraduates studying quantum computing and basic quantum mechanics, or as an introduction and guide for electronic engineers, mathematicians, computer scientists, or scholars in these fields who are interested in quantum computing and how it might fit into their research programs.
Download or read book Parallel Solution of Partial Differential Equations written by Mitchell Barry Luskin and published by Springer Science & Business Media. This book was released on 2000 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume are based on lectures given at the IMA workshop on the Parallel Solution of PDE during June 9-13, 1997. The numerical solution of partial differential equations has been of major importance to the development of many technologies and has been the target of much of the development of parallel computer hardware and software. Parallel computer offers the promise of greatly increased performance and the routine calculation of previously intractable problems. This volume contains papers on the development and assessment of new approximation and solution techniques that can take advantage of parallel computers. It will be of interest to applied mathematicians, computer scientists, and engineers concerned with investigating the state of the art and future directions in numerical computing. Topics include domain decomposition methods, parallel multi-grid methods, front tracking methods, sparse matrix techniques, adaptive methods, fictitious domain methods, and novel time and space discretizations. Applications discussed include fluid dynamics, radiative transfer, solid mechanics, and semiconductor simulation.
