Download or read book Enabling Techniques for Wide Bandwidth Fractional N Phase Locked Loops written by Sudhakar Pamarti and published by . This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Phase lock Techniques written by James A. Crawford and published by Artech House Publishers. This book was released on 2008 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unified approach to phase-lock tecnology, spanning large to small signal-to-noise ratio applications
Download or read book Digital Subsampling Phase Lock Techniques for Frequency Synthesis and Polar Transmission written by Nereo Markulic and published by Springer. This book was released on 2019-01-30 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains concepts behind fractional subsampling-based frequency synthesis that is re-shaping today’s art in the field of low-noise LO generation. It covers advanced material, giving clear guidance for development of background-calibrated environments capable of spur-free synthesis and wideband phase modulation. It further expands the concepts into the field of subsampling polar transmission, where the newly developed architecture enables unprecedented spectral efficiency levels, unquestionably required by the upcoming generation of wireless standards.
Download or read book PLL Modulation and Mixed Signal Calibration Techniques for FMCW Radar written by Pratap Tumkur Renukaswamy and published by Springer Nature. This book was released on with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS Fractional N Synthesizers written by Bram De Muer and published by Springer Science & Business Media. This book was released on 2005-12-29 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Fractional-N Synthesizers starts with a comprehensive introduction to general frequency synthesis. Different architectures and synthesizer building blocks are discussed with their relative importance on synthesizer specifications. The process of synthesizer specification derivation is illustrated with the DCS-1800 standard as a general test case. The book tackles the design of fractional-N synthesizers in CMOS on circuit level as well as system level. The circuit level focuses on high-speed prescaler design up to 12 GHz in CMOS and on fully integrated, low-phase-noise LC-VCO design. High-Q inductor integration and simulation in CMOS is elaborated and flicker noise minimization techniques are presented, ranging from bias point choice to noise filtering techniques. On a higher level, a systematic design strategy has been developed that trades off all noise contributions and fast dynamics for integrated capacitance (area). Moreover, a theoretical DeltaSigma phase noise analysis is presented, extended with a fast non-linear analysis method to accurately predict the influence of PLL non-linearities on the spectral purity of the DeltaSigma fractional-N frequency synthesizers.
Download or read book Pll Performance Simulation and Design written by Dean Banerjee and published by Dog Ear Publishing. This book was released on 2006-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for the reader who wishes to gain a solid understanding of Phase Locked Loop architectures and their applications. It provides a unique balance between both theoretical perspectives and practical design trade-offs. Engineers faced with real world design problems will find this book to be a valuable reference providing example implementations, the underlying equations that describe synthesizer behavior, and measured results that will improve confidence that the equations are a reliable predictor of system behavior. New material in the Fourth Edition includes partially integrated loop filter implementations, voltage controlled oscillators, and modulation using the PLL.
Download or read book Phase Locked Loops written by Woogeun Rhee and published by John Wiley & Sons. This book was released on 2023-12-19 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase-Locked Loops Discover the essential materials for phase-locked loop circuit design, from fundamentals to practical design aspects A phase-locked loop (PLL) is a type of circuit with a range of important applications in telecommunications and computing. It generates an output signal with a controlled relationship to an input signal, such as an oscillator which matches the phases of input and output signals. This is a critical function in coherent communication systems, with the result that the theory and design of these circuits are essential to electronic communications of all kinds. Phase-Locked Loops: System Perspectives and Circuit Design Aspects provides a concise, accessible introduction to PLL design. It introduces readers to the role of PLLs in modern communication systems, the fundamental techniques of phase-lock circuitry, and the possible applications of PLLs in a wide variety of electronic communications contexts. The first book of its kind to incorporate modern architectures and to balance theoretical fundamentals with detailed design insights, this promises to be a must-own text for students and industry professionals. The book also features: Coverage of PLL basics with insightful analysis and examples tailored for circuit designers Applications of PLLs for both wireless and wireline systems Practical circuit design aspects for modern frequency generation, frequency modulation, and clock recovery systems Phase-Locked Loops is essential for graduate students and advanced undergraduates in integrated circuit design, as well researchers and engineers in electrical and computing subjects.
Download or read book Wireless Radio Frequency Standards and System Design Advanced Techniques written by Cornetta, Gianluca and published by IGI Global. This book was released on 2012-01-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-frequency (RF) integrated circuits in CMOS technology are gaining increasing popularity in the commercial world, and CMOS technology has become the dominant technology for applications such as GPS receivers, GSM cellular transceivers, wireless LAN, and wireless short-range personal area networks based on IEEE 802.15.1 (Bluetooth) or IEEE 802.15.4 (ZigBee) standards. Furthermore, the increasing interest in wireless technologies and the widespread of wireless communications has prompted an ever increasing demand for radio frequency transceivers. Wireless Radio-Frequency Standards and System Design: Advanced Techniques provides perspectives on radio-frequency circuit and systems design, covering recent topics and developments in the RF area. Exploring topics such as LNA linearization, behavioral modeling and co-simulation of analog and mixed-signal complex blocks for RF applications, integrated passive devices for RF-ICs and baseband design techniques and wireless standards, this is a comprehensive reference for students as well as practicing professionals.
Download or read book Wireless Transceiver Circuits written by Woogeun Rhee and published by CRC Press. This book was released on 2018-09-03 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern transceiver systems require diversified design aspects as various radio and sensor applications have emerged. Choosing the right architecture and understanding interference and linearity issues are important for multi-standard cellular transceivers and software-defined radios. A millimeter-wave complementary metal–oxide–semiconductor (CMOS) transceiver design for multi-Gb/s data transmission is another challenging area. Energy-efficient short-range radios for body area networks and sensor networks have recently received great attention. To meet different design requirements, gaining good system perspectives is important. Wireless Transceiver Circuits: System Perspectives and Design Aspects offers an in-depth look at integrated circuit (IC) design for modern transceiver circuits and wireless systems. Ranging in scope from system perspectives to practical circuit design for emerging wireless applications, this cutting-edge book: Provides system design considerations in modern transceiver design Covers both systems and circuits for the millimeter-wave transceiver design Introduces four energy-efficient short-range radios for biomedical and wireless connectivity applications Emphasizes key building blocks in modern transceivers and transmitters, including frequency synthesizers and digital-intensive phase modulators Featuring contributions from renowned international experts in industry and academia, Wireless Transceiver Circuits: System Perspectives and Design Aspects makes an ideal reference for engineers and researchers in the area of wireless systems and circuits.
Download or read book 60 GHz CMOS Phase Locked Loops written by Hammad M. Cheema and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract This chapter lays the foundation for the work presented in latter chapters. The potential of 60 GHz frequency bands for high data rate wireless transfer is discussed and promising applications are enlisted. Furthermore, the challenges related to 60 GHz IC design are presented and the chapter concludes with an outline of the book. Keywords Wireless communication 60 GHz Millimeter wave integrated circuit design Phase-locked loop CMOS Communication technology has revolutionized our way of living over the last century. Since Marconi’s transatlantic wireless experiment in 1901, there has been tremendous growth in wireless communication evolving from spark-gap telegraphy to today’s mobile phones equipped with Internet access and multimedia capabilities. The omnipresence of wireless communication can be observed in widespread use of cellular telephony, short-range communication through wireless local area networks and personal area networks, wireless sensors and many others. The frequency spectrum from 1 to 6 GHz accommodates the vast majority of current wireless standards and applications. Coupled with the availability of low cost radio frequency (RF) components and mature integrated circuit (IC) techn- ogies, rapid expansion and implementation of these systems is witnessed. The downside of this expansion is the resulting scarcity of available bandwidth and allowable transmit powers. In addition, stringent limitations on spectrum and energy emissions have been enforced by regulatory bodies to avoid interference between different wireless systems.
Download or read book Modern RF and Microwave Measurement Techniques written by Valeria Teppati and published by Cambridge University Press. This book was released on 2013-06-20 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive, hands-on review of the most up-to-date techniques in RF and microwave measurement combines microwave circuit theory and metrology, in-depth analysis of advanced modern instrumentation, methods and systems, and practical advice for professional RF and microwave engineers and researchers. Topics covered include microwave instrumentation, such as network analyzers, real-time spectrum analyzers and microwave synthesizers; linear measurements, such as VNA calibrations, noise figure measurements, time domain reflectometry and multiport measurements; and non-linear measurements, such as load- and source-pull techniques, broadband signal measurements, and non-linear NVAs. Each technique is discussed in detail and accompanied by state-of-the-art solutions to the unique technical challenges associated with its use. With each chapter written by internationally recognised experts in the field, this is an invaluable resource for researchers and professionals involved with microwave measurements.
Download or read book Mixed Signal Circuits written by Thomas Noulis and published by CRC Press. This book was released on 2018-09-03 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Signal Circuits offers a thoroughly modern treatment of integrated circuit design in the context of mixed-signal applications. Featuring chapters authored by leading experts from industry and academia, this book: Discusses signal integrity and large-scale simulation, verification, and testing Demonstrates advanced design techniques that enable digital circuits and sensitive analog circuits to coexist without any compromise Describes the process technology needed to address the performance challenges associated with developing complex mixed-signal circuits Deals with modeling topics, such as reliability, variability, and crosstalk, that define pre-silicon design methodology and trends, and are the focus of companies involved in wireless applications Develops methods to move analog into the digital domain quickly, minimizing and eliminating common trade-offs between performance, power consumption, simulation time, verification, size, and cost Details approaches for very low-power performances, high-speed interfaces, phase-locked loops (PLLs), voltage-controlled oscillators (VCOs), analog-to-digital converters (ADCs), and biomedical filters Delineates the respective parts of a full system-on-chip (SoC), from the digital parts to the baseband blocks, radio frequency (RF) circuitries, electrostatic-discharge (ESD) structures, and built-in self-test (BIST) architectures Mixed-Signal Circuits explores exciting opportunities in wireless communications and beyond. The book is a must for anyone involved in mixed-signal circuit design for future technologies.
Download or read book High Performance AD and DA Converters IC Design in Scaled Technologies and Time Domain Signal Processing written by Pieter Harpe and published by Springer. This book was released on 2014-07-23 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the 18 tutorials presented during the 23rd workshop on Advances in Analog Circuit Design. Expert designers present readers with information about a variety of topics at the frontier of analog circuit design, serving as a valuable reference to the state-of-the-art, for anyone involved in analog circuit research and development.
Download or read book ELECTRONIC INSTRUMENTS AND INSTRUMENTATION TECHNOLOGY written by ANAND, M. M. S. and published by PHI Learning Pvt. Ltd.. This book was released on 2004-01-01 with total page 1344 pages. Available in PDF, EPUB and Kindle. Book excerpt: The standard laboratory tools in the modern scientific world include a wide variety of electronic instruments used in measurement and control systems. This book provides a firm foundation in principles, operation, design, and applications of electronic instruments. Commencing with electromechanical instruments, the specialized instruments such as signal analyzers, counters, signal generators, and digital storage oscilloscope are treated in detail. Good design practices such as grounding and shielding are emphasized. The standards in quality management, basics of testing, compatibility, calibration, traceability, metrology and various ISO 9000 quality assurance guidelines are explained as well. The evolution of communication technology in instrumentation is an important subject. A single chapter is devoted to the study of communication methods used in instrumentation technology. There are some areas where instrumentation needs special type of specifications-one such area is hazardous area. The technology and standards used in hazardous areas are also discussed. An instrumentation engineer is expected to draw and understand the instrumentation drawings. An Appendix explains the symbols and standards used in P&I diagrams with several examples. Besides worked-out examples included throughout, end-of-chapter questions and multiple choice questions are also given to judge the student's understanding of the subject. Practical and state-of-the-art in approach, this textbook will be useful for students of electrical, electronics, and instrumentation engineering.
Download or read book Design of CMOS Phase Locked Loops written by Behzad Razavi and published by Cambridge University Press. This book was released on 2020-01-30 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This modern, pedagogic textbook from leading author Behzad Razavi provides a comprehensive and rigorous introduction to CMOS PLL design, featuring intuitive presentation of theoretical concepts, extensive circuit simulations, over 200 worked examples, and 250 end-of-chapter problems. The perfect text for senior undergraduate and graduate students.
Download or read book Analog Circuit Design written by Arthur H.M. van Roermund and published by Springer Science & Business Media. This book was released on 2003-10-31 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Number 12 in the successful series of Analog Circuit Design provides valuable information and excellent overviews of analogue circuit design, CAD and RF systems. The series is an ideal reference for those involved in analogue and mixed-signal design.
Download or read book All Digital Frequency Synthesizer in Deep Submicron CMOS written by Robert Bogdan Staszewski and published by John Wiley & Sons. This book was released on 2006-09-22 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new and innovative paradigm for RF frequency synthesis and wireless transmitter design Learn the techniques for designing and implementing an all-digital RF frequency synthesizer. In contrast to traditional RF techniques, this innovative book sets forth digitally intensive design techniques that lead the way to the development of low-cost, low-power, and highly integrated circuits for RF functions in deep submicron CMOS processes. Furthermore, the authors demonstrate how the architecture enables readers to integrate an RF front-end with the digital back-end onto a single silicon die using standard ASIC design flow. Taking a bottom-up approach that progressively builds skills and knowledge, the book begins with an introduction to basic concepts of frequency synthesis and then guides the reader through an all-digital RF frequency synthesizer design: Chapter 2 presents a digitally controlled oscillator (DCO), which is the foundation of a novel architecture, and introduces a time-domain model used for analysis and VHDL simulation Chapter 3 adds a hierarchical layer of arithmetic abstraction to the DCO that makes it easier to operate algorithmically Chapter 4 builds a phase correction mechanism around the DCO such that the system's frequency drift or wander performance matches that of the stable external frequency reference Chapter 5 presents an application of the all-digital RF synthesizer Chapter 6 describes the behavioral modeling and simulation methodology used in design The final chapter presents the implementation of a full transmitter and experimental results. The novel ideas presented here have been implemented and proven in two high-volume, commercial single-chip radios developed at Texas Instruments: Bluetooth and GSM. While the focus of the book is on RF frequency synthesizer design, the techniques can be applied to the design of other digitally assisted analog circuits as well. This book is a must-read for students and engineers who want to learn a new paradigm for RF frequency synthesis and wireless transmitter design using digitally intensive design techniques.
