Download or read book Emulsion Polymerization and Emulsion Polymers written by Peter A. Lovell and published by John Wiley & Sons. This book was released on 1997-04-03 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion Polymerization and Emulsion Polymers Edited by Peter A. Lovell Manchester Materials Science Centre, UMIST, Manchester, UK and Mohamed S. El-Aasser Emulsion Polymers Institute and Department of Chemical Engineering, Lehigh University, Bethlehem, PA, USA Emulsion polymerization is a technologically and commercially important reaction used to produce synthetic polymers and latexes for a wide range of applications. It is the basis of a massive global industry that is expanding due to the versatility of the reaction and the greater realization of the ability to control properties of the polymer latexes produced. Emulsion Polymerization and Emulsion Polymers provides an up-to-date treatment of both academic and industrial aspects of the subject in a single self-contained volume. Established knowledge is integrated with latest developments and introductory chapters to give a state-of-the-art summary which is also suitable as a broad based introduction to the field. The individual chapters have been written by specialists from academia and industry and are presented in a way which ensures that the book will be of equal value to experienced researchers and students.

Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsion polymerisation produces high value polymers in a low cost, environmentally friendly process. The drive to develop environmentally benign production methods for polymers has resulted in widespread development and implementation of the emulsion polymerisation technique. In addition, when combined with novel polymerisation mechanisms the process can give rise to a range of polymer products with particularly useful properties. Emulsion polymerisation is a complex process, governed by the interplay of both chemical and physical properties including polymerisation kinetics and dispersion stability. Successful industrial application relies on understanding and controlling those properties. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, Chemistry and Technology of Emulsion Polymerisation provides a practical and intuitive explanation of emulsion polymerisation. In the development of industrial processes, coupling that understanding with everyday practice can be a further difficult step, so the book emphasises a clear, comprehensive and straightforward discussion to illustrate how the principles relate to practical application. Written for research chemists, technologists and engineers in the polymer, fine and specialty chemicals industries, and in university or government laboratories, this book will be particularly valuable to those early on in their careers. The comprehensive and straightforward coverage will also ensure it is an important resource for advanced courses in emulsion polymerisation.

Download or read book Emulsion Polymerization of Vinyl Acetate written by Mohamed S. El-Aasser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is particularly appropriate that this symposium on the emulsion polymeriza tion of vinyl acetate was held in recognition of the industrial importance of poly(vinyl acetate) and vinyl acetate copolymers, and their rather unique properties among emulsion polymers in general. Poly( vinyl acetate) latexes were the first synthetic polymer latexes to be made on a commercial scale: their production using polyvinyl alcohol as emulsifier began in Germany during the mid-1930s and has continued to the present day, growing steadily with the years. Indeed, poly(vinyl acetate) latexes prepared with polyvinyl alcohol are still one of the mainstays of the adhesives industry. With the passing of time, however, vinyl acetate copolymers have been developed: copolymers with maleate esters such as dibutyl maleate, acrylate esters such as ethyl acrylate and butyl acrylate, versatic acid esters, and, more recently, ethylene. These versatile copolymers have found increasing use in more sophisticated adhesives with specialized properties, adhesives for clay coatings on paper, carpet backing, and interior and exterior paints. Thus more than 45 years after the first commercial production of vinyl acetate latexes, their use is still growing, both in actual quantities and different applications. The industrial importance of vinyl acetate latexes makes the mechanism and kinetics of their emulsion polymerization of practical as well as scientific interest.

Download or read book Principles and Applications of Emulsion Polymerization written by Chorng-Shyan Chern and published by John Wiley & Sons. This book was released on 2008-10-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of methods of emulsion polymerization This book provides a comprehensive reference on emulsion polymerization methods,focusing on the fundamental mechanisms and kinetics of each process, as well as howthey can be applied to the manufacture of environmentally friendly polymeric materials. Topics covered include: Conventional emulsion polymerization Miniemulsion polymerization Microemulsion polymerization Industrial emulsion polymerization processes (primarily the semibatch and continuous reactions systems) The role of various colloidal phenomena in emulsion polymerization Important end-use properties of emulsion polymer (latex) products Information on industrial applications in paints, coatings, adhesives, paper and board, and more This is a hands-on reference for graduate students and professionals in polymerchemistry, chemical engineering, and materials science who are involved in researchon coatings, adhesives, rubber, latex, paints, finishes, and other materials that can becreated using various methods of emulsion polymerization.

Download or read book Emulsion Polymerization and Its Applications in Industry written by V. I. Eliseeva and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a large body of Soviet work on emulsion polymerization, spanning a period of over three decades, that has been published primarily in the Russian language. Most of this has remained untranslated into English and hence un available to most other scientists. The value of this book lies primarily in the fact that it brings together the most important of these Soviet contributions, along with comment and analysis by the authors, who may be considered among the foremost authorities in this field in the Soviet Union. But the hundreds of literature citations go far beyond the borders of the Soviet Union and serve as an excellent bibliography of the world literature on emulsion polymerization up to the time this book was written. The book covers both fundamental and applied aspects. In the former are included discussions of particle formation mechanisms, a comprehensive theory of emulsion polymerization, copolymerization of polar monomers, and particle morphology and its implications with regard to derived film properties. Among the applied aspects are discussions of continuous emulsion polymerization, both tubular reactors and continuous stirred tank cascades, and various aspects con cerning the manufacture of some of the most important monomers, such as styrene, butadiene, vinyl acetate, methyl methacrylate, acrylonitrile, and chloroprene. This book will be an indispensable reference source for scientists who are entering the field as well as those who are experienced and who have wanted a ready access to this large body of literature.

Download or read book Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers written by Yildirim H. Erbil and published by CRC Press. This book was released on 2000-03-22 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The versatility of the emulsion copolymerization reaction and the ability to control the properties of the final latices have led to rapid expansion both in the quantity of polyvinylacetate and vinyl acetate-acrylic copolymer latices and in their applications. Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers provides

Download or read book Chemistry and Technology of Emulsion Polymerisation written by A. M. van Herk and published by John Wiley & Sons. This book was released on 2013-05-13 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and Technology of Emulsion Polymerisation 2e provides a practical and intuitive explanation of emulsion polymerization, in combination with both conventional and controlled radical polymerization. For those working in industry, coupling theory with everyday practice can be difficult. By carefully explaining the principles of the reaction, based on well-designed experimental investigation, the book explains how the principles relate to practical application. The second edition of this book includes a new chapter on morphology of latex particles, a rapidly progressing area where modelling the thermodynamic and kinetic aspects of phase separation and morphology has developed into a mature and powerful tool to predict and control morphology of latex particles. Another area that is rapidly progressing is the application of controlled radical polymerisation in emulsion polymerization. Controlled radical polymerisation is used in aiding encapsulation of inorganic particles like pigment particles and clay platelets. These latest developments are included in the second edition.

Download or read book Concentrated Emulsion Polymerization written by Eli Ruckenstein and published by CRC Press. This book was released on 2019-03-29 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising one volume of Functional and Modified Polymeric Materials, Two-Volume Set, this curated collection of papers by Professor Eli Ruckenstein and co-workers discusses the merits of concentrated emulsion polymerization systems, as well as their ability to yield a broad variety of products with high synthetic efficiency. Comprised of carefully curated chapters previously published by these pioneering scientists in the field, this volume offers a comprehensive view of the subject and presents functional and modified polymeric materials prepared by concentrated emulsion polymerization approaches. It covers conductive polymer composites, core-shell latex particles, enzyme/catalyst carriers, and plastics toughening and compatibilization polymerization. The authors have performed seminal studies on the preparation of functional and modified polymeric materials via concentrated emulsion polymerization. The corresponding research papers, after further selection and classification, are collected in the four chapters of this book.

Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.

Download or read book Emulsion Polymerization written by D.C. Blackley and published by Springer. This book was released on 1975-10-31 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emulsion Polymerization written by Irja Piirma and published by . This book was released on 1982 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emulsion Polymer Technology written by Robert D. Athey and published by CRC Press. This book was released on 1991-03-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: An explanation for engineers and chemists working in such industries as paper, paint, and textiles, of the operating mechanisms involved in the physics and chemistry of polymers and colloids as they apply to emulsion polymer manufacture and use. Outlines the various available materials, how they are

Download or read book Porous Polymers written by Michael S. Silverstein and published by John Wiley & Sons. This book was released on 2011-04-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the various aspects of the porous polymer field into one volume. It not only presents a fundamental description of the field, but also describes the state of the art for such materials and provides a glimpse into the future. Emphasizing a different aspect of the ongoing research and development in porous polymers, the book is divided into three sections: Synthesis, Characterization, and Applications. The first part of each chapter presents the basic scientific and engineering principles underlying the topic, while the second part presents the state of the art results based on those principles. In this fashion, the book connects and integrates topics from seemingly disparate fields, each of which embodies different aspects inherent in the diverse field of porous polymeric materials.

Download or read book Polymer Nanocomposites by Emulsion and Suspension Polymerization written by Vikas Mittal and published by Royal Society of Chemistry. This book was released on 2010-09-30 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites revolutionized research in the composites area by achieving the nanoscale dispersion of the inorganic filler (clay platelets) in the polymer matrices after suitable surface modifications of the filler phase. A large number of polymer matrices were tried and nanocomposites with varying degrees of successes were achieved with these polymer systems. The majority of the synthesis are carried out by melt blending which frequently result in the full exfoliation of the filler. However, advanced techniques provide a number of advantages as compared to the melt blending and lead to more uniform composites with enhanced properties. There are a number of recent advances in these methods such as the use of reactive surfactants, modified initiators, advanced clay surface modifications, use of a variety of fillers, inverse polymerization, and miniemulsion polymerization methods which have further led the generation of advanced exfoliated nanocomposites. Until now, most of the published research has been scattered throughout the literature. This book provides a single comprehensive source of information about one of the most important facets of polymer nanocomposites technology: synthesis in emulsion and suspension. These polymerization methods lead to the generation of the well delaminated polymer nanocomposites with a wide range of polymer matrices. This book serves as both a professional reference for experienced researchers and a valuable text for newcomers to the field. It makes the reader aware of the potential commercial use of these recent developments.

Download or read book Emulsion Polymerization written by Robert G. Gilbert and published by . This book was released on 1995 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a modern overview of the principles governing emulsion polymerization, a topic of both academic and industrial importance. The reader is provided with the mathematical, physical and technical tools to understand the mechanisms and physical chemistry of these systems, particularly the major advances of the last 15 years. The book describes the mechanisms that govern the various aspects of an emulsion polymerization, and how from appropriate experimental studies, the dominant mechanisms in a particular system may be deduced. From such deductions, the means are developed whereby the properties of the result of the emulsion polymerization can be quantitatively modelled and trends can be qualitatively understood and predicted. This book opens the way to the intelligent, knowledge-based design that is the future for improvements and innovations in products and processes from this important technology. Provides a thoroughly up-to-date overview of the principles and practices of emulsion polymerization Contains mathematical, physical, and technical tools which enable the reader to understand the mechanisms and physical chemistry used in the field Includes extensive exercises with model answers

Download or read book Principles of Polymerization written by George Odian and published by John Wiley & Sons. This book was released on 2004-02-09 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of a classic text and reference The large chains of molecules known as polymers are currently used in everything from "wash and wear" clothing to rubber tires to protective enamels and paints. Yet the practical applications of polymers are only increasing; innovations in polymer chemistry constantly bring both improved and entirely new uses for polymers onto the technological playing field. Principles of Polymerization, Fourth Edition presents the classic text on polymer synthesis, fully updated to reflect today's state of the art. New and expanded coverage in the Fourth Edition includes: * Metallocene and post-metallocene polymerization catalysts * Living polymerizations (radical, cationic, anionic) * Dendrimer, hyperbranched, brush, and other polymer architectures and assemblies * Graft and block copolymers * High-temperature polymers * Inorganic and organometallic polymers * Conducting polymers * Ring-opening polymer ization * In vivo and in vitro polymerization Appropriate for both novice and advanced students as well as professionals, this comprehensive yet accessible resource enables the reader to achieve an advanced, up-to-date understanding of polymer synthesis. Different methods of polymerization, reaction parameters for synthesis, molecular weight, branching and crosslinking, and the chemical and physical structure of polymers all receive ample coverage. A thorough discussion at the elementary level prefaces each topic, with a more advanced treatment following. Yet the language throughout remains straightforward and geared towards the student. Extensively updated, Principles of Polymerization, Fourth Edition provides an excellent textbook for today's students of polymer chemistry, chemical engineering, and materials science, as well as a current reference for the researcher or other practitioner working in these areas.

Download or read book Concentrated Emulsion Polymerization written by Eli Ruckenstein and published by CRC Press. This book was released on 2019-03-29 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprising one volume of Functional and Modified Polymeric Materials, Two-Volume Set, this curated collection of papers by Professor Eli Ruckenstein and co-workers discusses the merits of concentrated emulsion polymerization systems, as well as their ability to yield a broad variety of products with high synthetic efficiency. Comprised of carefully curated chapters previously published by these pioneering scientists in the field, this volume offers a comprehensive view of the subject and presents functional and modified polymeric materials prepared by concentrated emulsion polymerization approaches. It covers conductive polymer composites, core-shell latex particles, enzyme/catalyst carriers, and plastics toughening and compatibilization polymerization. The authors have performed seminal studies on the preparation of functional and modified polymeric materials via concentrated emulsion polymerization. The corresponding research papers, after further selection and classification, are collected in the four chapters of this book.