Download or read book Emulsion based Synthesis and Characterization of Biphasic Janus Particles for Dual Drug Delivery written by Jennifer Sherri Winkler and published by . This book was released on 2016 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Janus particles exhibit many unique chemical, optical, electrical, and physical properties due to their two chemically distinct surfaces. They are highly sought after for diverse applications across many fields including electronics, energy, catalysis, and emulsion stabilization. Janus particles also hold great promise in the field of biomedical engineering as drug delivery vehicles, theranostic platforms, and components of biosensors. As drug delivery vehicles, they offer a platform for co-encapsulating drugs with widely disparate solubility as well as independent release kinetics. However, large-scale synthesis methods are needed before Janus particles can realize their full potential in biomedicine. A novel technique based on the phase separation of two immiscible polymers and/or lipids within single O/W and double W/O/W emulsion droplets is presented for the production of Janus particles. The effects of various formulation and process variables on final Janus particle properties including particle size, stability, morphology, and encapsulation efficiency are studied. A wide range of Janus particle morphologies were synthesized, including acorn-like, spherical, crescent moon, and two nearly separated droplets. From a purely thermodynamic perspective, particle shape is a function of the interfacial tensions between the two polymers, as well as the interfacial tensions between each of the polymers and the aqueous phase containing surfactant. These interfacial tensions are adjusted by changing the type and concentration of surfactant in the water phase, making a wide range of morphologies accessible. In order to quantifiably describe the influence of interfacial tension on particle morphology, a thermodynamic model for the prediction of Janus particle morphology was developed. The model is derived from first-principles, in which the exact shape of a Janus particle is extracted via total free energy minimization of Janus particles modeled as two overlapping semicircles. In reverse, particle geometry measurements obtained from microscopy can be applied to the model in order to explicitly calculate the volume ratio and the surface tension of each of the three interfaces. The ability to control Janus particle shape is of fundamental importance for many potential applications, as function depends on structure. Janus particles were applied to a case study involving the treatment of lung cancer with doxorubicin, a broad spectrum chemotherapeutic, and curcumin, a bioflavanoid with antioxidant, anti-inflammatory, and antitumor effects. The Janus particles containing doxorubicin and curcumin completely inhibited tumor growth over a four-week treatment period, attesting to the advantages of bicompartmental Janus carriers for dual drug delivery of synergistic compounds.

Download or read book Janus Particle Synthesis Self Assembly and Applications written by Shan Jiang and published by Royal Society of Chemistry. This book was released on 2012-11-30 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Named after the two-faced roman god, Janus particles have gained much attention due to their potential in a variety of applications, including drug delivery. This is the first book devoted to Janus particles and covers their methods of synthesis, how these particles self-assemble, and their possible uses. By following the line of synthesis, self-assembly and applications, the book not only covers the fundamental and applied aspects, but it goes beyond a simple summary and offers a logistic way of selecting the proper synthetic route for Janus particles for certain applications. Written by pioneering experts in the field, the book introduces the Janus concept to those new to the topic and highlights the most recent research progress on the topic for those active in the field and catalyze new ideas.

Download or read book Design and Development of New Nanocarriers written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2017-11-30 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Development of New Nanocarriers focuses on the design and development of new nanocarriers used in pharmaceutical applications that have emerged in recent years. In particular, the pharmaceutical uses of microfluidic techniques, supramolecular design of nanocapsules, smart hydrogels, polymeric micelles, exosomes and metal nanoparticles are discussed in detail. Written by a diverse group of international researchers, this book is a valuable reference resource for those working in both biomaterials science and the pharmaceutical industry. - Shows how nanomanufacturing techniques can help to create more effective, cheaper pharmaceutical products - Explores how nanofabrication techniques developed in the lab have been translated to commercial applications in recent years - Explains safety and regulatory aspects of the use of nanomanufacturing processes in the pharmaceutical industry

Download or read book Flowing Matter written by Federico Toschi and published by Springer Nature. This book was released on 2019-09-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, published in the Soft and Biological Matter series, presents an introduction to selected research topics in the broad field of flowing matter, including the dynamics of fluids with a complex internal structure -from nematic fluids to soft glasses- as well as active matter and turbulent phenomena. Flowing matter is a subject at the crossroads between physics, mathematics, chemistry, engineering, biology and earth sciences, and relies on a multidisciplinary approach to describe the emergence of the macroscopic behaviours in a system from the coordinated dynamics of its microscopic constituents. Depending on the microscopic interactions, an assembly of molecules or of mesoscopic particles can flow like a simple Newtonian fluid, deform elastically like a solid or behave in a complex manner. When the internal constituents are active, as for biological entities, one generally observes complex large-scale collective motions. Phenomenology is further complicated by the invariable tendency of fluids to display chaos at the large scales or when stirred strongly enough. This volume presents several research topics that address these phenomena encompassing the traditional micro-, meso-, and macro-scales descriptions, and contributes to our understanding of the fundamentals of flowing matter. This book is the legacy of the COST Action MP1305 “Flowing Matter”.

Download or read book Fundamentals of Nanoparticles written by Abdel Salam Hamdy Makhlouf and published by William Andrew. This book was released on 2018-08-09 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Nanoparticles: Classifications, Synthesis Methods, Properties and Characterization explores the nanoparticles and architecture of nanostructured materials being used today in a comprehensive, detailed manner. This book focuses primarily on the characterization, properties and synthesis of nanoscale materials, and is divided into three major parts. This is a valuable reference for materials scientists, and chemical and mechanical engineers working in R&D and academia, who want to learn more about how nanoparticles and nanomaterials are characterized and engineered. Part one covers nanoparticles formation, self-assembly in the architecture nanostructures, types and classifications of nanoparticles, and signature physical and chemical properties, toxicity and regulations. Part two presents different ways to form nanometer particles, including bottom-up and top-down approaches, the classical and non-classical theories of nanoparticles formation and self-assembly, surface functionalization and other surface treatments to allow practical use. Part three covers characterization of nanoparticles and nanostructured materials, including the determination of size and shape, in addition to atomic and electronic structures and other important properties. - Includes new physical and chemical techniques for the synthesis of nanoparticles and architecture nanostructures - Features an in-depth treatment of nanoparticles and nanostructures, including their characterization and chemical and physical properties - Explores the unusual properties of materials that are developed by modifying their shape and composition and by manipulating the arrangement of atoms and molecules - Explains important techniques for the synthesis, fabrication and the characterization of complex nano-architectures

Download or read book Oil in Water Nanosized Emulsions for Drug Delivery and Targeting written by Tamilvanan Shunmugaperumal and published by John Wiley & Sons. This book was released on 2020-12-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines emulsion knowledge into a single, comprehensive volume, ideal for professionals and students involved in the areas of pharmaceutical science who are looking to learn about this emergent research concept. Compiles the step-by-step investigations made concerning the potential of nanosized emulsions on both drug delivery and drug targeting areas by different group of scientists in various laboratories across the world Inverts the common nano-emulsions coverage trend of focusing on focused on the particulate system itself, instead exploring the way to turn nanosized emulsions as biomedical tool, as well as, treating the in vitro and in vivo aspects after administration Provides an overview of the current state-of-the art regarding the development of tocol emulsions, emulsion adjuvants in immunization research, oxygen-carrying emulsions (called as fluorocarbon emulsion) and emulsions for delivering drugs to nasal and topical (ocular and transdermal) routes

Download or read book Nanofibres in Drug Delivery written by Gareth R. Williams and published by UCL Press. This book was released on 2018-09-17 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years there has been an explosion of interest in the production of nanoscale fibres for drug delivery and tissue engineering. Nanofibres in Drug Delivery aims to outline to new researchers in the field the utility of nanofibres in drug delivery, and to explain to them how to prepare fibres in the laboratory. The book begins with a brief discussion of the main concepts in pharmaceutical science. The authors then introduce the key techniques that can be used for fibre production and explain briefly the theory behind them. They discuss the experimental implementation of fibre production, starting with the simplest possible set-up and then moving on to consider more complex arrangements. As they do so, they offer advice from their own experience of fibre production, and use examples from current literature to show how each particular type of fibre can be applied to drug delivery. They also consider how fibre production could be moved beyond the research laboratory into industry, discussing regulatory and scale-up aspects.

Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.

Download or read book Self Assembly of Nanostructures and Patchy Nanoparticles written by Shafigh Mehraeen and published by BoD – Books on Demand. This book was released on 2020-11-04 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: Top-down approaches are currently the main contributor of fabricating microelectronic devices. However, the prohibitive cost of numerous technological steps in these approaches is the main obstacle to further progress. Furthermore, a large number of applications necessitate fabrication of complex and ultra-small devices that cannot be made using these approaches. New approaches based on natural self-assembly of matter need to be developed to allow for fabrication of micro and nanoelectronic devices. Self-assembly of nanostructures is a dynamic field, which explores physics of these structures and new ways to fabricate them. However, the major problem is how to control the properties of the nanostructures resulting from low dimensionality. This book presents recent advances made to address this problem, and fabricate nanostructures using self-assembly.

Download or read book Polymer Colloids written by Rodney Priestley and published by Royal Society of Chemistry. This book was released on 2019-12-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Academic and industrial research around polymer-based colloids is huge, driven both by the development of mature technologies, e.g. latexes for coatings, as well as the advancement of new materials and applications, such as building blocks for 2D/3D structures and medicine. Edited by two world-renowned leaders in polymer science and engineering, this is a fundamental text for the field. Based on a specialised course by the editors, this book provides the reader with an invaluable single source of reference. The first section describes formation, explaining basic properties of emulsions and dispersion polymerization, microfluidic approaches to produce polymer-based colloids and formation via directed self-assembly. The next section details characterisation methodologies from microscopy and small angle scattering, to surface science and simulations. The final chapters close with applications, including Pickering emulsions and molecular engineering for materials development. A comprehensive guide to polymer colloids, with contributions by leaders in their respective areas, this book is a must-have for researchers and practitioners working across polymers, soft matter and chemical and molecular engineering.

Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science

Download or read book Handbook of Ultrasonics and Sonochemistry written by Muthupandian Ashokkumar and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advanced Healthcare Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-05-09 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive and interdisciplinary view of cutting-edge research on advanced materials for healthcare technology and applications Advanced healthcare materials are attracting strong interest in fundamental as well as applied medical science and technology. This book summarizes the current state of knowledge in the field of advanced materials for functional therapeutics, point-of-care diagnostics, translational materials, and up-and-coming bioengineering devices. Advanced Healthcare Materials highlights the key features that enable the design of stimuli-responsive smart nanoparticles, novel biomaterials, and nano/micro devices for either diagnosis or therapy, or both, called theranostics. It also presents the latest advancements in healthcare materials and medical technology. The senior researchers from global knowledge centers have written topics including: State-of-the-art of biomaterials for human health Micro- and nanoparticles and their application in biosensors The role of immunoassays Stimuli-responsive smart nanoparticles Diagnosis and treatment of cancer Advanced materials for biomedical application and drug delivery Nanoparticles for diagnosis and/or treatment of Alzheimers disease Hierarchical modelling of elastic behavior of human dental tissue Biodegradable porous hydrogels Hydrogels in tissue engineering, drug delivery, and wound care Modified natural zeolites Supramolecular hydrogels based on cyclodextrin poly(pseudo)rotaxane Polyhydroxyalkanoate-based biomaterials Biomimetic molecularly imprinted polymers

Download or read book Bijels written by Paul S Clegg and published by Royal Society of Chemistry. This book was released on 2020-03-27 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bicontinuous interfacially jammed emulsion gels, now commonly termed 'bijels', are a class of soft materials, in which interpenetrating, continuous domains of two immiscible fluids are maintained in a rigid arrangement by a jammed layer of colloidal particles at their interface. Such gels have unusual material properties that promise exciting applications across diverse fields from energy materials and catalysis, to food science. This is the first book on the subject and provides the reader with a fundamental introduction. Edited by a recognised authority on bijels, the reader will learn about the bijel and its formation. Bringing together current understanding, this book aims to bring the potential application of bijels to diverse materials challenges closer to fruition. This is a must-have resource for anyone working in soft matter and applied fields.

Download or read book Emulsion Science written by Jerôme Bibette and published by Springer. This book was released on 2003-07-01 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emulsions occur either as end products or during the processing of products in a huge range of areas including the food, agrochemical, pharmaceuticals, paints and oil industries. As end products, emulsions allow to avoid organic solvent in processing hydrophobic coatings. Emulsion technology is a suitable approach to vehicle viscous phases. It is also a remarkable mean of targeting actives or capturing specific species. The range of applications of emulsions progresses and their manufacturing becomes more and more sophisticated. Besides this broad domain of technological interest, emulsions are raising a variety of fundamental questions at the frontier between physic and chem istry. Indeed, as a class of soft colloidal materials, emulsions science is linked to various aspects of these disciplines: phase transitions, surface forces and wetting, metastability and hydrodynamic instabilities, mechanical properties and flow. The aim of this book is to review the main important concepts governing emulsion science. In Chapter 2, repulsive interactions between liquid films are discussed as well as adhesive interaction related to wetting. In Chap ter 3, consequences of weak and strong attractions are presented, related to the well accepted liquid solid transition analogy. In Chapter 4, the basics of both bulk compressibility and shear elasticity are presented, the role of disorder being the most important aspect of the elastic behavior of these soft systems. In Chapter 5 the central question of the emulsion lifetime related to metastability is discussed.

Download or read book Nanotechnology for Microfluidics written by Xingyu Jiang and published by John Wiley & Sons. This book was released on 2020-09-08 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on microfluidics with applications in nanotechnology. The first part summarizes the recent advances and achievements in the field of microfluidic technology, with emphasize on the the influence of nanotechnology. The second part introduces various applications of microfluidics in nanotechnology, such as drug delivery, tissue engineering and biomedical diagnosis.

Download or read book Foams and Emulsions written by J.F. Sadoc and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: A general and introductory survey of foams, emulsions and cellular materials. Foams and emulsions are illustrations of some fundamental concepts in statistical thermodynamics, rheology, elasticity and the physics and chemistry of divided media and interfaces. They also give rise to some of the most beautiful geometrical shapes and tilings, ordered or disordered. The chapters are grouped into sections having fairly loose boundaries. Each chapter is intelligible alone, but cross referencing means that the few concepts that may not be familiar to the reader can be found in other chapters in the book. Audience: Research students, researchers and teachers in physics, physical chemistry, materials science, mechanical engineering and geometry.