Download or read book Semiconductor Nanocrystal Quantum Dots written by Andrey Rogach and published by Springer Science & Business Media. This book was released on 2008-09-02 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to specifically focus on semiconductor nanocrystals, and address their synthesis and assembly, optical properties and spectroscopy, and potential areas of nanocrystal-based devices. The enormous potential of nanoscience to impact on industrial output is now clear. Over the next two decades, much of the science will transfer into new products and processes. One emerging area where this challenge will be very successfully met is the field of semiconductor nanocrystals. Also known as colloidal quantum dots, their unique properties have attracted much attention in the last twenty years.

Download or read book Epoxy Polymers written by Jean-Pierre Pascault and published by John Wiley & Sons. This book was released on 2009-12-09 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the only book to focus on new developments and innovations in this hot field international experts from industry and academia present everything scientists need to know. The first section provides general concepts of the synthesis and properties of epoxy polymers and serves as a basis for the subsequent chapters. The second section includes new types of epoxy polymers recently commercialized or not yet present on the market, while the third section includes chapters related to the capacity of generating controlled nanostructures in epoxy-based materials. A fourth section is devoted to innovations in epoxy-based materials such as adhesives, coatings, pre-pregs, structural foams, injection-molded products and self-healing epoxies. Concluding remarks and perspectives are discussed in a short final section. The result is a one-stop reference source, collecting scientific and technological breakthroughs otherwise spread over hundreds of publications, patents and reports.

Download or read book Industrial High Pressure Applications written by Rudolf Eggers and published by John Wiley & Sons. This book was released on 2012-07-11 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial high pressure processes open the door to many reactions that are not possible under 'normal' conditions. These are to be found in such different areas as polymerization, catalytic reactions, separations, oil and gas recovery, food processing, biocatalysis and more. The most famous high pressure process is the so-called Haber-Bosch process used for fertilizers and which was awarded a Nobel prize. Following an introduction on historical development, the current state, and future trends, this timely and comprehensive publication goes on to describe different industrial processes, including methanol and other catalytic syntheses, polymerization and renewable energy processes, before covering safety and equipment issues. With its excellent choice of industrial contributions, this handbook offers high quality information not found elsewhere, making it invaluable reading for a broad and interdisciplinary audience.

Download or read book Polymer Colloids written by R. Buscall and published by Springer. This book was released on 1985-01-31 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waterborne and Solvent Based Alkyds and Their End User Applications written by N. Tuck and published by . This book was released on 2000 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyurethanes are highly versatile polymers with uses from foams to elastomers and coatings. In particular polyurethane coatings find application in the automotive industry, in plastic coatings, in adhesives as sealants and sealers, and in the aerospace industry. Including chapters on the basic chemistry of polyurethanes, as well as discussing their many uses in the coatings arena, this book provides an detailed overview of the current state of the art in this field.

Download or read book Handbook of RAFT Polymerization written by Christopher Barner-Kowollik and published by John Wiley & Sons. This book was released on 2008-09-08 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spanning the entire field from fundamentals to applications in material science, this one-stop source is the first comprehensive reference for polymer, physical and surface chemists, materials scientists, chemical engineers, and those chemists working in industry. From the contents: * Introduction: Living Free Radical Polymerization and the RAFT Process * Fundamental Structure-Reactivity Correlations Governing the RAFT Process * Mechanism and Kinetics * The RAFT Process as a Kinetic Tool * Theory and Practice in Technical Applications * RAFT Polymerization in Bulk and Organic Solvents, as well as Homogeneous Aqueous Systems * Emulsion and Mini-Emulsion Polymerization * Complex Architecture Design * Macromolecular Design via the Interchange of Xanthates * Surface Modification * Stability and Physical Properties of RAFT Polymers * Novel Materials: From Drug Delivery to Opto-Electronics * Outlook and Future Developments

Download or read book Fundamentals of Latex Film Formation written by Joseph Keddie and published by Springer Science & Business Media. This book was released on 2010-02-18 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has emerged out of our long-time research interests on the topic of latex film formation. Over the years we have built up a repertoire of slides used in conference presentations, short courses and tutorials on the topic. The story presented in this book has thereby taken shape as it has been told and re-told to a mix of academic and industrial audiences. The book presents a wide body of work accumulated by the polymer colloids community over the past five decades, but the selection of examples has been flavoured by our particular experimental interests and development of mathematical models. We intend the book to be a starting point for academic and industrial scientists beginning research on latex film formation. The emphasis is on fundam- tal mechanisms, however, and not on applications nor on specific effects of formu- tions. We hope that the book consolidates the understanding that has been achieved to-date in the literature in a more comprehensive way than is possible in a review article. We trust that the reader will appreciate the fascination of the topic.

Download or read book Aggravations and Ameliorations written by and published by B. Jain Publishers. This book was released on with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over

Download or read book Industrial Gases Processing written by Heinz-Wolfgang Häring and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost every modern manufacturing process relies on industrial gases, and sales of such gases are expected to rise by around 45% over the next five years. Here, experienced and authoritative experts from one of the two world's largest producer of industrial gases impart their knowledge on atmospheric, noble and synthesized gases, carbon dioxide, LNG, acetylene and other fuel gases, as well as special and medical gases. Modern applications, e.g., the use of hydrogen in fuel cells, are included as well. This practical text is rounded off by a section on logistics.

Download or read book Chemical Engineering Dynamics written by John Ingham and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the modelling of dynamic chemical engineering processes is presented in a highly understandable way using the unique combination of simplified fundamental theory and direct hands-on computer simulation. The mathematics is kept to a minimum, and yet the nearly 100 examples supplied on www.wiley-vch.de illustrate almost every aspect of chemical engineering science. Each example is described in detail, including the model equations. They are written in the modern user-friendly simulation language Berkeley Madonna, which can be run on both Windows PC and Power-Macintosh computers. Madonna solves models comprising many ordinary differential equations using very simple programming, including arrays. It is so powerful that the model parameters may be defined as "sliders", which allow the effect of their change on the model behavior to be seen almost immediately. Data may be included for curve fitting, and sensitivity or multiple runs may be performed. The results can be seen simultaneously on multiple-graph windows or by using overlays. The resultant learning effect of this is tremendous. The examples can be varied to fit any real situation, and the suggested exercises provide practical guidance. The extensive experience of the authors, both in university teaching and international courses, is reflected in this well-balanced presentation, which is suitable for the teacher, the student, the chemist or the engineer. This book provides a greater understanding of the formulation and use of mass and energy balances for chemical engineering, in a most stimulating manner. This book is a third edition, which also includes biological, environmental and food process examples.

Download or read book Process Plant Design written by Frank Peter Helmus and published by John Wiley & Sons. This book was released on 2008-06-25 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the fascinating wealth of activities as they occur in the design, construction and commissioning of a chemical plant - a jigsaw puzzle of the work of chemical engineers, chemists, constructors, architects, electrical engineers, process automation engineers, economists and legal staff. The author first takes the reader through the conceptual phase, in which the economic relevance and environmental impact need to be considered and supplemented by accurate estimates of capital requirements and profitability. This phase ends with the choice of an appropriate engineering firm and the conclusion of the contract, after which the reader is guided through all aspects of the implementation phase from the engineering of the chemical plant to commissioning, equipment and material procurement, the erection phase and the successful test run, after which the new facility is handed over to its owner. The book also illustrates many potential sources of errors by means of examples from practice, and how, aside professional skills, teamwork and communication are also absolutely essential to keep such a complex project on track.

Download or read book Enzymes in Industry written by Wolfgang Aehle and published by John Wiley & Sons. This book was released on 2008-01-08 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading experts from all over the world present an overview of the use of enzymes in industry for: - the production of bulk products, such as glucose, or fructose - food processing and food analysis - laundry and automatic dishwashing detergents - the textile, pulp and paper and animal feed industries - clinical diagnosis and therapy - genetic engineering. The book also covers identification methods of new enzymes and the optimization of known ones, as well as the regulatory aspects for their use in industrial applications. Up to date and wide in scope, this is a chance for non-specialists to acquaint themselves with this rapidly growing field. '...The quality...is so great that there is no hesitation in recommending it as ideal reading for any student requiring an introduction to enzymes. ...Enzymes in Industry - should command a place in any library, industrial or academic, where it will be frequently used.' The Genetic Engineer and Biotechnologist 'Enzymes in Industry' is an excellent introduction into the field of applied enzymology for the reader who is not familiar with the subject. ... offers a broad overview of the use of enzymes in industrial applications. It is up-to-date and remarkable easy to read, despite the fact that almost 50 different authors contributed. The scientist involved in enzyme work should have this book in his or her library. But it will also be of great value to the marketing expert interested in the present use of enzymes and their future in food and nonfood applications.' Angewandte Chemie 'This book should be available to all of those working with, or aspiring to work with, enzymes. In particular academics should use this volume as a source book to ensure that their 'new' projects will not 'reinvent the wheel'.' Journal of Chemical Technology and Biotechnology

Download or read book Principles and Applications of Emulsion Polymerization written by Chorng-Shyan Chern and published by John Wiley & Sons. This book was released on 2008-10-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date coverage of methods of emulsion polymerization This book provides a comprehensive reference on emulsion polymerization methods,focusing on the fundamental mechanisms and kinetics of each process, as well as howthey can be applied to the manufacture of environmentally friendly polymeric materials. Topics covered include: Conventional emulsion polymerization Miniemulsion polymerization Microemulsion polymerization Industrial emulsion polymerization processes (primarily the semibatch and continuous reactions systems) The role of various colloidal phenomena in emulsion polymerization Important end-use properties of emulsion polymer (latex) products Information on industrial applications in paints, coatings, adhesives, paper and board, and more This is a hands-on reference for graduate students and professionals in polymerchemistry, chemical engineering, and materials science who are involved in researchon coatings, adhesives, rubber, latex, paints, finishes, and other materials that can becreated using various methods of emulsion polymerization.

Download or read book Particles in Turbulent Flows written by Leonid I. Zaichik and published by John Wiley & Sons. This book was released on 2008-12-04 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only work available to treat the theory of turbulent flow with suspended particles, this book also includes a section on simulation methods, comparing the model results obtained with the PDF method to those obtained with other techniques, such as DNS, LES and RANS. Written by experienced scientists with background in oil and gas processing, this book is applicable to a wide range of industries -- from the petrol industry and industrial chemistry to food and water processing.

Download or read book Polymeric Dispersions Principles and Applications written by J.M. Asua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up to date survey of the science and technology of polymeric dispersions. The book discusses the kinetics and mechanisms of polymerization in dispersed media, examines the processes controlling particle morphology, presents both off-line and on-line methods for the characterization of polymer colloids, considers reactor engineering and control, and covers a wide variety of applications, such as latex paint formulations, encapsulation of inorganic particles, reactive latexes, adhesives, paper coating, and biomedical and pharmaceutical applications. Audience: A valuable resource for scientists and engineers, academic and industrial, who are involved in the manufacture or application of polymeric dispersions.

Download or read book Process Engineering Problem Solving written by Joseph M. Bonem and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Avoid wasting time and money on recurring plant process problems by applying the practical, five-step solution in Process Engineering Problem Solving: Avoiding "The Problem Went Away, but it Came Back" Syndrome. Combine cause and effect problem solving with the formulation of theoretically correct working hypotheses and find a structural and pragmatic way to solve real-world issues that tend to be chronic or that require an engineering analysis. Utilize the fundamentals of chemical engineering to develop technically correct working hypotheses that are key to successful problem solving.