Download or read book Workplace Transport Safety written by Great Britain. Health and Safety Executive and published by . This book was released on 2005 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Suitable for self-employed people, contractors, safety representatives, vehicle operators and other employees, trade associations, and commercial landlords, this book discusses transport safety in the workplace.
Download or read book An Employer s Guide to Health Safety Management written by Peter Arscott and published by . This book was released on 1976 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Study Guide for the Operator Certificate of Professional Competence CPC in Road Freight written by Clive Pidgeon and published by Kogan Page Publishers. This book was released on 2016-06-03 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Study Guide for the Operator Certificate of Professional Competence (CPC) in Road Freight is a vital study guide that offers the thorough preparation needed to pass the tough CPC exams. This is the Level 3 standard qualification overseen by OFQUAL and the Welsh Assembly Government which is required by any person wishing to operate vehicles over 3,500kgs maximum authorised mass for hire and reward, both in the UK and/or internationally. A Study Guide for the Operator Certificate of Professional Competence (CPC) in Road Freight covers the examination method used by both OCR and CILT. It covers the 8 study sections that the directive requires: civil law; commercial law; social law; fiscal law; business; financial; management of the undertaking access to the market; technical standards and technical aspects of the operation road safety. The new book has been extensively revised to make it more accessible and understandable. It features many more case studies, examples, diagrams and graphics. There are also test questions for each section.
Download or read book Working Disasters written by Eric Tucker and published by Routledge. This book was released on 2016-12-05 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every day, workers are injured, made ill, or killed on the job. Most often, workers experience these harms individually and in isolation. Particular occurrences rarely attract much public attention beyond, perhaps, a small paragraph in the local newspaper. Instead, these events are normalized. This membrane of normalcy, however, is ruptured from time to time, especially after a disaster. This edited collection draws together original case studies written by leading researchers in Australia, Canada, Great Britain, Sweden, and the United States that examine the politics of working disasters. The essays address two fundamental questions: what gets recognized as a work disaster? And how does the state respond to one? In some instances, it seems self-evident that a disaster has occurred. For example, when a mine explodes killing tens or hundreds of workers simultaneously, the media and politicians recognize that this is not just a personal tragedy for the families of the victims, and that more troubling questions need to be asked about how this could happen. In other circumstances, however, the process that determines what gets recognized as a disaster is much more complicated. "Working Disasters" addresses the politics of recognition in case studies of the long-haul trucking industry, repetitive strain injuries, and lung disease in miners. Once it has recognized that a working disaster has occurred, the state typically goes beyond its routine responses to the daily toll of work-related deaths and injuries. Inquiries may be initiated to review the adequacy of regulatory systems and laws may be amended. Sometimes disasters produce meaningful change, but often they do not. In this text, the politics of response is considered in studies of a factory fire, the loss of an offshore oilrig, lung disease among miners, a mine explosion, and the prosecution of health and safety offences. This book will be of use to occupational health and safety activists and professionals; academics and upper-year students in: industrial relations, labour studies, labour history, law, political science, and sociology.
Download or read book A Study Guide for the Operator Certificate of Professional Competence CPC in Road Freight 2018 written by Clive Pidgeon and published by Kogan Page Publishers. This book was released on 2018-01-03 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Study Guide for the Operator Certificate of Professional Competence (CPC) in Road Freight 2018 is a vital study guide that offers the thorough preparation needed to pass the tough CPC exams in the UK. It covers the examination method used by the Oxford, Cambridge and RSA (OCR) and the Chartered Institute of Logistics and Transport (CILT). This is the Level 3 standard qualification overseen by The Office of Qualifications and Examinations Regulation (OFQUAL) and the Welsh Assembly Government, which is required by any person wishing to operate vehicles over 3,500 kg, the maximum authorised mass for hire and reward, in the UK and internationally. A Study Guide for the Operator Certificate of Professional Competence (CPC) in Road Freight 2018 has been extensively revised to include all the new legislation. It covers the eight study sections that the directive requires: civil law; commercial law; social law; fiscal law; business; financial; management of the undertaking access to the market; technical standards and technical aspects of the operation road safety. It features many case studies, examples, diagrams and graphics. New to this edition: test questions after each section.
Download or read book A Study Guide for the Operator Certificate of Professional Competence CPC in Road Freight 2020 written by Clive Pidgeon and published by Kogan Page Publishers. This book was released on 2020-02-03 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Study Guide for the Operator Certificate of Professional Competence (CPC) in Road Freight 2020 is a vital study guide that offers the thorough preparation needed to pass the tough CPC exams in the UK. It covers the examination method used by the Oxford, Cambridge and RSA (OCR) and the Chartered Institute of Logistics and Transport (CILT). This is the Level 3 standard qualification overseen by The Office of Qualifications and Examinations Regulation (OFQUAL) and the Welsh Assembly Government, which is required by any person wishing to operate vehicles over 3,500 kg, the maximum authorised mass for hire and reward, in the UK and internationally. A Study Guide for the Operator Certificate of Professional Competence (CPC) in Road Freight 2020 has been extensively revised to include all the new legislation. It covers the eight study sections that the directive requires: civil law; commercial law; social law; fiscal law; business; financial; management of the undertaking access to the market; technical standards and technical aspects of the operation road safety. It features many case studies, examples, diagrams and graphics. New to this edition: updated sections on operator licencing, drivers' hours, tachographs, vehicle testing, vehicle tax, vehicle registration, civil law, international driving and documentation.
Download or read book Health and Safety Premises and Environment Handbook 2012 written by Workplace Law Group and published by Kogan Page Publishers. This book was released on 2011-12-03 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Health and Safety, Premises and Environment Handbook 2012 provides you with all the essential information you need on legislation, regulation, policy, case law and best practice. Information is presented in plain English, and broken down into separate A-Z sections containing legislative summaries, key points, handy fact boxes and sources of further information. All the guidance is written and compiled by our team of expert authors, including top law firms, surveyors, safety consultants and regulatory bodies. Workplace Law's Health and Safety, Premises and Environment Handbook is aimed at all those with an interest in the health and safety, premises and environmental management aspects of the workplace, and so our readership consists mainly of Health and Safety managers, officers and directors, Facilities Managers, as well as General Managers and Directors of small businesses.
Download or read book International Health and Safety at Work written by Phil Hughes and published by Routledge. This book was released on 2013-05-07 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of International Health and Safety at Work has been specially written in simple English for the thousands of students who complete the NEBOSH International Certificate in Health and Safety each year. Fully updated and matched to the March 2011 syllabus, this course book provides students with all they need to tackle the course with confidence. Full colour pages and over 200 illustrations bring health and safety to life. Each chapter starts with learning outcome summaries and ends with questions taken from recent NEBOSH examinations. Specimen answers and a study skills chapter are also included to aid exam preparation. Endorsed by NEBOSH for the International General Certificate in Occupational Health and Safety. Provides all the material students need for the course including tables, forms and checklists that can be used for health and safety activities such as risk assessment Gives a unique summary of Occupational Health and Safety legal frameworks in over 20 countries including the EU and USA plus details of several ILO conventions and recommendations which are useful to students and a wide range of managers This NEBOSH-endorsed textbook introduces the reader to the fundamentals of health and safety in the workplace from an international perspective. The book not only meets the needs of students on the NEBOSH course but remains a useful reference for all managers who work to international standards and need to adapt them to local needs and practice. Phil Hughes MBE, MSc, CFIOSH, is a former Chairman of NEBOSH (1995-2001), former President of IOSH (1990-1991) and runs his own consultancy. He received an MBE for services to health and safety and as director of RoSPA in the New Year's Honours List 2005. Ed Ferrett PhD, BSc (Hons Eng), CEng, MIMechE, MIET, CMIOSH, is a former Vice Chairman of NEBOSH (1999-2008) and a lecturer on various NEBOSH health and safety courses. He is a Chartered Engineer and a health and safety consultant.
Download or read book Guidelines for Preventing Workplace Violence for Health care and Social service Workers written by and published by . This book was released on 2003 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety and Health at Work written by and published by . This book was released on 2000 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Regulating Gig Work written by Joellen Riley Munton and published by Taylor & Francis. This book was released on 2023-12-12 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital revolution demands new approaches to regulating work. The ‘Uberisation’ of work is not, in reality, a new phenomenon. It reintroduces the practices of ‘on-demand’ engagement of labour, common prior to the development of continuing employment. What is new, however, is the capacity of digital technology to engage labour in ways that avoid characterisation as employment according to the legal tests developed in the 20th century. This book tackles the challenge of ensuring that the emerging tribes of ‘gig’ workers in labour markets across the globe are afforded decent standards of work. This book discusses how to provide decent conditions and safe working standards for on-demand workers engaged through digital platforms. It interrogates the rise of gig work, and the legal strategies that might be engaged to deal with the risk that on-demand work will fall and remain outside of employment protections. It draws on observations of practices across the globe but focusses particularly on regulatory solutions developed in Australia. The book will be a useful reference to policy making and legal reforms to address vulnerabilities of gig workers.
Download or read book International Health and Safety at Work written by Phil Hughes MBE and published by Routledge. This book was released on 2015-09-16 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Health and Safety at Work has been specially written in simple English for the thousands of students who complete the NEBOSH International General Certificate in Health and Safety each year. Fully revised in alignment with the April 2015 syllabus, this third edition provides students with all they need to tackle the course with confidence. Clear, easily accessible information is presented in full colour, with discussion of essential principles such as ILO and OSH conventions as well as legal frameworks from a range of countries. Aligned to the NEBOSH International General Certificate in Occupational Health and Safety Practice questions and answers to test knowledge and increase understanding Complete with a companion website containing extra resources for tutors and students at www.routledge.com/cw/hughes The only textbook endorsed for the NEBOSH International General Certificate in Health and Safety, International Health and Safety at Work remains the most effective tool for those working to fit international health and safety standards to local needs and practice.
Download or read book Driving at Work 2008 Special Report hard copy written by and published by Workplace Law Group. This book was released on with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2002-03-12 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors' aim with this handbook, is to provide a rapid ready-reference to help in the often complex task of handling, using and disposing of chemicals safely and with minimum risk to people's health or damage to facilities or to the environment. The book provides look-up data, and concise, clear explanations of general chemical principles, physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to compliance with designated safe practice, control of risks to people's health and limitation of environmental impact. - Over 600 pages of valuable reference materialIncludes information on physiochemical and reactive properties, toxicities and exposure limits, flammability characteristics, monitoring techniques, personal protection and other parameters and requirements relating to complianceSummarizes core information for quick reference in the workplace or in transit
Download or read book Introduction to Hazard Control Management written by James T. Tweedy and published by CRC Press. This book was released on 2013-09-25 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Board for the Certification of Safety Managers (IBFCSM) has designated this text as the Primary Study Reference for those preparing to sit for the Certified Hazard Control Manager (CHCM) and the Certified Hazard Control Manager-Security (CHCM-SEC) Examinations. Introduction to Hazard Control Management: A Vital Organizational Func
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1972 with total page 1932 pages. Available in PDF, EPUB and Kindle. Book excerpt:
