Download or read book EMI Filter Design for Matrix Converters in Airspace Applications written by Marco Degano and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced power electronics systems are increasingly being used for AC motor drives, due to their numerous advantages in terms of performance and flexibility; however, due to their switching behaviour, they introduce significant harmonic content. To reduce any interaction with other appliances suitable EMI filters need to be designed and implemented. The focus of this thesis is on the characterization of a matrix converter induction motor drive for aerospace application from the point of view of EMI interference and on the design and implementation of suitable filtering systems. Concerns about Electro Magnetic Interferences are particularly justified in the light of the fact that high reliability is sought after in such applications. The main interest in this work lies in the electromagnetic regulations defining the allowable conducted emissions in the frequencies between 150 kHz and 30 MHz. The first goal achieved by this work is to characterize the EMI signature of a matrix converter induction motor drive using common and differential mode measurements of the converter and motor impedances separately. Based only on these measurements the project aims to synthesize accurate HF models for the Induction Motor and the Matrix Converter in common and differential mode, without the need of deep level studies that may involve long Finite Elements (FE) simulations of the physical system characteristics. This thesis proposes two general novel HF models for Matrix Converters and Induction Motors that could also be applied in any other application or operating condition. These models are automatically tuned and optimized by a suitably developed Genetic Algorithm (GA) routine capable to match those models with real experimental measurements. This thesis reports the methodologies used for both input and output filter design, together with description and analysis of some issues encountered during the process.

Download or read book EMI Filter Design for Matrix Converters in Airspace Applications written by Marco Degano and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Butterworth-Heinemann. This book was released on 2017-09-09 with total page 1510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Handbook, Fourth Edition, brings together over 100 years of combined experience in the specialist areas of power engineering to offer a fully revised and updated expert guide to total power solutions. Designed to provide the best technical and most commercially viable solutions available, this handbook undertakes any or all aspects of a project requiring specialist design, installation, commissioning and maintenance services. Comprising a complete revision throughout and enhanced chapters on semiconductor diodes and transistors and thyristors, this volume includes renewable resource content useful for the new generation of engineering professionals. This market leading reference has new chapters covering electric traction theory and motors and wide band gap (WBG) materials and devices. With this book in hand, engineers will be able to execute design, analysis and evaluation of assigned projects using sound engineering principles and adhering to the business policies and product/program requirements. - Includes a list of leading international academic and professional contributors - Offers practical concepts and developments for laboratory test plans - Includes new technical chapters on electric vehicle charging and traction theory and motors - Includes renewable resource content useful for the new generation of engineering professionals

Download or read book EMI Filter Design written by Richard Lee Ozenbaugh and published by CRC Press. This book was released on 2017-12-19 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: With today’s electrical and electronics systems requiring increased levels of performance and reliability, the design of robust EMI filters plays a critical role in EMC compliance. Using a mix of practical methods and theoretical analysis, EMI Filter Design, Third Edition presents both a hands-on and academic approach to the design of EMI filters and the selection of components values. The design approaches covered include matrix methods using table data and the use of Fourier analysis, Laplace transforms, and transfer function realization of LC structures. This edition has been fully revised and updated with additional topics and more streamlined content. New to the Third Edition Analysis techniques necessary for passive filter realization Matrix method and transfer function analysis approaches for LC filter structure design A more hands-on look at EMI filters and the overall design process Through this bestselling book’s proven design methodology and practical application of formal techniques, readers learn how to develop simple filter solutions. The authors examine the causes of common- and differential-mode noise and methods of elimination, the source and load impedances for various types of input power interfaces, and the load impedance aspect of EMI filter design. After covering EMI filter structures, topologies, and components, they provide insight into the sizing of components and protection from voltage transients, discuss issues that compromise filter performance, and present a goal for a filter design objective. The text also includes a matrix method for filter design, explains the transfer function method of LC structures and their equivalent polynomials, and gives a circuit design example and analysis techniques. The final chapter presents packaging solutions of EMI filters.

Download or read book Conducted EMC Modeling and EMI Filter Design Integrated Class D Amplifiers and Power Converters written by Roberto Mrad and published by . This book was released on 2014 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switching power management circuits are widely used in battery powered embedded applications in order to increase their autonomy. In particular, for audio applications, Class-D amplifiers are a widespread industrial solution. These, have a similar architecture of a buck converter but having the audio signal as reference. The switching nature of these devices allows us to increase significantly the power efficiency compared to linear audio amplifiers without reducing the audio quality. However, because of the switching behavior, Class-D amplifiers have high levels of electromagnetic (EM) emissions which can disturb the surrounding electronics or might not comply with electromagnetic compatibility (EMC) standards. To overcome this problem much architecture appeared in the state of the art that reduces the emissions, however, this has never been enough to remove electromagnetic interference (EMI) filters. It is then useful to optimize these filters, thus, it has been set as the goal of this PhD thesis. The latter has been divided to four main axes which can be resumed by the following. First, this work started by developing a frequency domain modeling method in order to simulate and predict the EMI of Class-D amplifiers in the final application. The method is based on system to block decomposition and impedance matrix modeling and manipulation. After providing all the theoretical background, the method has been validated on integrated differential Class-D amplifier. The experimental measurements have permitted to validate the method only up to 100MHz. However, this is sufficient to cover the conducted EMC frequency band. Second, the EMI at the supply rails of Class-D amplifiers has been treated. As the battery is often the same power supply for all applications in an embedded system, an EMI filter or a decoupling capacitor is needed to prevent the noise coupling by common impedance. Designing this filter needs the knowledge of the battery impedance at the desired frequencies. Therefore the present work dealt also with measuring the high frequency impedance of a battery. Afterwards, an experimental validation has been carried on with a DC-DC converter and a Class-D amplifier. The developed model allows a virtual test of the switching device in the final application. However, it is more useful if the model is able to help the system integrator in designing filters. Thus, third, the model has been implemented in an optimization loop based on a genetic algorithm in order to optimize the filter response, and also, reduce the additional power losses introduced by an EMI filter. The optimization search space has been limited to the components available on the market and the optimization result is given as component references of the optimal filter referring to the optimal solution found. This procedure has been validated experimentally. Finally, EMI filters often are constituted by magnetic components such as ferrite beads or inductors with magnetic cores. Thus, introducing the EMI filter in the audio path, adds a nonlinear behavior in the audio frequency band. Designing a high quality EMI filter require taking into account this phenomenon and studying its impact of the original amplifier audio performance. Therefore, the Jiles-Atherton model for magnetic materials has been used for ferrite bead modeling. Hereafter, the impact on the time and frequency domain signals has been simulated and compared to measurements. Finally, the total harmonic distortion (THD) has been computed for different signal amplitudes and compared to the THD measured using an audio analyzer. Accurate results have been obtained on a wide range of signal amplitudes. As a conclusion, this work aimed to design optimal EMI filters for Class-D amplifiers. Thus, we dealt with improving their EMI response, reducing their additional power losses and evaluating their impact on the audio quality.

Download or read book High Density EMI Filter Design in High Power Three phase Motor Drive Systems written by Jing Xue (Researcher in electrical engineering) and published by . This book was released on 2014 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: High density EMI filter is important in the application of more-electric-aircraft (MEA). In this work, the author is focusing on several major aspects of EMI filter design that would influence the power density. In Chapter 1, the feature of EMI study and conventional design methods are reviewed. The interaction between the common-mode (CM) and differential-mode (DM) noise is one key factor introducing unnecessary weight to EMI filter design. In Chapter 2, the author explains the origin of the mixed-mode (MM) noise on the output side of three-phase motor drives. Experimental results have verified the existence of the MM noise in three-phase motor drives and its impact on power density. In Chapter 3, the noise mode transformation (NMT) in three-phase motor drives due to system impedance unbalance is discussed. Simulation and experimental results show that the NMT will cause EMI filter overdesign if not considered during the design stage. In Chapter 4 the author discusses the possibility of adding a CM inductor at the motor front and chassis end to reduce CM EMI filter weight. Experimental results show that the motor-end filter is effective in attenuating low frequency noise and has the benefit of being light weight comparing with the traditional three-phase CM choke. Cooling of the filter is of great importance in high power systems. In Chapter 5, a practical liquid-cooling design procedure for EMI filters in high power motor drives has been discussed. Potting and thermal modeling are analyzed. Thermal test results verify the effectiveness of the procedure. In Chapter 6, the author models the impedance impact of potting material and cooling cases on both CM and DM inductors. Experimental results match well with the developed models. In Chapter 7, a comprehensive design procedure for high density EMI filter in high power motor drives has been proposed, based on the knowledge of previous chapters. As the verification of the procedure, a high density EMI filter is designed and tested in a 100 kW three-phase motor drive system for MEA application. Conclusion and future work are summarized in Chapter 8.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book EMI Filter Design written by Richard Lee Ozenbaugh and published by CRC Press. This book was released on 2000-11-09 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering simple methods of measuring AC and DC power lines, this highly popular, revised and expanded reference describes the selection of cores, capacitors, mechanical shapes, and styles for the timeliest design, construction, and testing of filters. It presents analyses of matrices of various filter types based on close approximations, observation, and trial and error. Supplying simple parameters and techniques for creating manufacturable, repeatable products, the second edition provides insights into the cause and elimination of common mode noise in lines and equipment, explores new data on spike, pulse, trapezoid, and quasisquare waves, and reviews the latest high-current filters.

Download or read book Transportation Electrification written by Ahmed A. Mohamed and published by John Wiley & Sons. This book was released on 2022-12-06 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transportation Electrification Dive deep into the latest breakthroughs in electrified modes of transport In Transportation Electrification, an accomplished team of researchers and industry experts delivers a unique synthesis of detailed analyses of recent breakthroughs in several modes of electric transportation and a holistic overview of how those advances can or cannot be applied to other modes of transportation. The editors include resources that examine electric aircraft, rolling stock, watercraft, and vehicle transportation types and comparatively determine their stages of development, distinctive and common barriers to advancement, challenges, gaps in technology, and possible solutions to developmental problems. This book offers readers a breadth of foundational knowledge combined with a deep understanding of the issues afflicting each mode of transportation. It acts as a roadmap and policy framework for transportation companies to guide the electrification of transportation vessels. Readers will benefit from an overview of key standards and regulations in the electrified transportation industry, as well as: A thorough introduction to the various modes of electric transportation, including recent advances in each mode, and the technological and policy challenges posed by them An exploration of different vehicle systems, including recent advanced in hybrid and EV powertrain architectures and advanced energy management strategies Discussions of electrified aircraft, including advanced technologies and architecture optimizations for cargo air vehicle, passenger air vehicles, and heavy lift vertical take-off and landing craft In-depth examinations of rolling stock and watercraft-type vehicles, and special vehicles, including various system architectures and energy storage systems relevant to each Perfect for practicing professionals in the electric transport industry, Transportation Electrification is also a must-read resource for standardization body members, regulators, officials, policy makers, and undergraduate students in electrical and electronics engineering.

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2092 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applications of Power Electronics written by Frede Blaabjerg and published by MDPI. This book was released on 2019-06-24 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics technology is still an emerging technology, and it has found its way into many applications, from renewable energy generation (i.e., wind power and solar power) to electrical vehicles (EVs), biomedical devices, and small appliances, such as laptop chargers. In the near future, electrical energy will be provided and handled by power electronics and consumed through power electronics; this not only will intensify the role of power electronics technology in power conversion processes, but also implies that power systems are undergoing a paradigm shift, from centralized distribution to distributed generation. Today, more than 1000 GW of renewable energy generation sources (photovoltaic (PV) and wind) have been installed, all of which are handled by power electronics technology. The main aim of this book is to highlight and address recent breakthroughs in the range of emerging applications in power electronics and in harmonic and electromagnetic interference (EMI) issues at device and system levels as discussed in ‎robust and reliable power electronics technologies, including fault prognosis and diagnosis technique stability of grid-connected converters and ‎smart control of power electronics in devices, microgrids, and at system levels.

Download or read book Information Display written by and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Static Power Frequency Changers written by L. Gyugyi and published by John Wiley & Sons. This book was released on 1976 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Electronics written by Ned Mohan and published by . This book was released on 1994 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Power Converters and AC Drives written by Bin Wu and published by John Wiley & Sons. This book was released on 2007-01-29 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest cutting-edge technology in high-power converters and medium voltage drives, and provides a complete analysis of various converter topologies, modulation techniques, practical drive configurations, and advanced control schemes. Supplemented with more than 250 illustrations, the author illustrates key concepts with simulations and experiments. Practical problems, along with accompanying solutions, are presented to help you tackle real-world issues.

Download or read book Technology for Large Space Systems written by and published by . This book was released on 1979 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: