Download or read book Emerging Technologies in Oral and Maxillofacial Surgery written by Arash Khojasteh and published by Springer Nature. This book was released on 2023-07-25 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the application of emerging technologies, occurring after the 4th industrial revolution, in oral and maxillofacial surgery (OMFS) and introduces a new era of personalized medicine in this discipline. It describes the manufacturing and data acquisition methods, in detail, including the advantages and disadvantages of each process. The workflow of using the emerging technologies in reconstructive treatments, orthognathic surgery, implant dentistry, robotic surgery and bio‐fabrication have been covered in separate chapters. Several related cases in conjunction with the workflow are presented and discussed as clinical examples of each, for practical discussion of the workflow and process trajectory. Each chapters provides introduction, definition, application and plausible pitfalls of employing these technologies in specific areas. Given the multiple materials and techniques, the logic behind selection of each in different fields of practice and thorough explanation of process provides surgeons with a background on how and why a certain approach is employed, and if application of emerging technologies would outdo traditional treatment processes. The importance of fabricating living tissues is discussed as one of the most recent progresses in the field. The bench-to-bedside transition, their clinical application, and their remarkable positive impact on oral and maxillofacial surgical procedures are covered. This book is arranged for oral and maxillofacial, and plastic surgeons and in-training-fellows in associated fields.
Download or read book Digital Technologies in Oral and Maxillofacial Surgery An Issue of Atlas of the Oral and Maxillofacial Surgery Clinics written by Gary P. Orentlicher and published by Elsevier Health Sciences. This book was released on 2012-03-26 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting edge information for all oral and maxillofacial surgeons on computed tomography and guided surgery! Topics include comparison of CT and cone beam technologies, stereolithographic modeling and surgical guide concepts, virtual technologies in dentoalveolar evaluation and surgery, computer guided planning and placement of dental implants, utilization in the treatment of facial trauma, digital technologies in pathology and reconstruction, 3D technologies in craniofacial and orthognathic surgery, evaluation and fabrication of custom cosmetic facial implants, and extraoral craniofacial applications.
Download or read book Innovative Perspectives in Oral and Maxillofacial Surgery written by Mark R. Stevens and published by Springer Nature. This book was released on 2021-07-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the latest technologies and developments in oral and maxillofacial surgery. It presents information in an easy-to-read format and meticulously details each surgical technique. Thorough and accurate chapters comprehensively present procedures and treatments step-by-step procedures objectively. Each chapter follows a consistent format of which includes the scientific documentation of the procedure through clinical studies, objective benefits for the patient, detailed explanations of the procedure, levels of treatment complexity according to the SAC (simple -advanced complex) classification, and cost-effectiveness of the procedure for the patient and clinician. Extensive images, figures, and tables supplement select chapters to aid in visual learning. Extensive and unique, Innovative Perspectives in Oral and Maxillofacial Surgery is a vital tool for all dental specialists ranging from undergraduate students to established oral maxillofacial surgeons.
Download or read book Digital Technologies in Craniomaxillofacial Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2018-06-13 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the way that surgeons operate. They are revolutionizing the ability of surgeons to visualize, plan, and create rapid prototyped models and patient- specific implants for the broad disciplines of ENT, plastic, oral and maxillofacial surgeons. This book provides information on the latest digital technologies available for craniomaxillofacial surgery, discussing how this technology allows for preplanned procedures with improved and superior outcomes. Rather than improvise during surgery, surgery and its procedures can be preconceptualized with superior outcomes and decreased patient morbidity.
Download or read book Advances in Oral and Maxillofacial Surgery written by Jose M Marchena and published by Elsevier Health Sciences. This book was released on 2019-10-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Oral and Maxillofacial Surgery Clinics of North America is devoted to Advances in Oral and Maxillofacial Surgery and is edited by Drs. Jose M. Marchena, Jonathan Shum and Jonathon S. Jundt. Articles will include: Virtual Surgical Planning for Maxillofacial Surgery; Surgical Navigation for Oral and Maxillofacial Surgery; Real Time Adjuncts for Dental Implant Placement; New Technologies for Tissue Cutting; Minimally Invasive Maxillofacial Surgery; Conservative Approaches to Benign Pathology; Tissue Engineering; Patient-Specific Implants; Practice Management in Oral and Maxillofacial Surgery; Advances in Anesthesia Monitoring; Advances in Surgical Training: Simulation; Advances in Functioning Imaging; and more!
Download or read book Computer Aided Oral and Maxillofacial Surgery written by Jan Egger and published by Academic Press. This book was released on 2021-04-29 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Oral and Maxillofacial Surgery: Developments, Applications, and Future Perspectives is an ideal resource for biomedical engineers and computer scientists, clinicians and clinical researchers looking for an understanding on the latest technologies applied to oral and maxillofacial surgery. In facial surgery, computer-aided decisions supplement all kind of treatment stages, from a diagnosis to follow-up examinations. This book gives an in-depth overview of state-of-the-art technologies, such as deep learning, augmented reality, virtual reality and intraoperative navigation, as applied to oral and maxillofacial surgery. It covers applications of facial surgery that are at the interface between medicine and computer science. Examples include the automatic segmentation and registration of anatomical and pathological structures, like tumors in the facial area, intraoperative navigation in facial surgery and its recent developments and challenges for treatments like zygomatic implant placement. - Provides comprehensive, state-of-the-art knowledge of interdisciplinary applications in facial surgery - Presents recent algorithmic developments like Deep Learning, along with recent devices in augmented reality and virtual reality - Includes clinical knowledge of two facials surgeons who give insights into the current clinical practice and challenges of facial surgeons in university hospitals in Austria and China
Download or read book Advancements and Innovations in OMFS ENT and Facial Plastic Surgery written by James C. Melville and published by Springer Nature. This book was released on 2023-08-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will cover updated practices and cutting-edge innovations pertinent to advanced Oral & Maxillofacial Surgeons, Otolaryngologists (Head and Neck Surgeons), and Facial Plastic Surgeons. Each chapter will review and update the reader on advancements in procedures and technologies in head and neck surgery. The authors are world-renowned experts in their respective fields who are keen to share their extensive experience and preferred approaches. Chapters will cover: Reviewing current techniques and highlighting future innovations and technologies pertaining to oral, head, and neck surgery. Illustrating ways to formulate specific treatment plans for the management of complex ailments and defects of the head and neck region. Developing specific treatment plans for the reconstruction of complex structures. Updating reader knowledge on both current and up-and-coming innovative procedures. Discussing the science underlying current and next-generation technologies. This book is intended for all oral and maxillofacial surgeons, head and neck surgeons, and plastic and reconstructive surgeons who wish to increase their knowledge on the latest modalities of maxillary and mandibular reconstruction.
Download or read book Oral Surgery Innovations Advancing Dental Procedures for Optimal Outcomes written by Dr. H. Hari Kishore Bhat and published by Inkbound Publishers. This book was released on 2023-03-14 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the latest innovations in oral surgery with this comprehensive guide. Focusing on advanced procedures and technologies, this book aims to improve patient outcomes and provide oral surgeons with the tools to stay at the forefront of their field.
Download or read book Oral and Maxillofacial Surgery written by Raymond J. Fonseca and published by Saunders. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This resource provides in-depth information to help you perfect your oral and maxillofacial surgical technique and provide state-of-the-art care for your patients. The full scope of the field is represented with up-to-date, evidence-based coverage of every surgical procedure performed today.
Download or read book Education in Oral and Maxillofacial Surgery An Evolving Paradigm An Issue of Oral and Maxillofacial Surgery Clinics of North America E Book written by Leslie R. Halpern and published by Elsevier Health Sciences. This book was released on 2022-11-01 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this issue of Oral and Maxillofacial Surgery Clinics, guest editors Drs. Leslie R. Halpern and Eric R. Carlson bring their considerable expertise to the topic of Education in Oral and Maxillofacial Surgery: An Evolving Paradigm. This all-new Clinics topic addresses the changing surgical environment, the innovative learning trajectories of trainees, and other timely considerations as OMFS education moves forward in the 21st century. Top experts provide a comprehensive look at all stages of OMFS education, from residency and fellowship to the aging oral surgeon, plus articles on history, accreditation, role modeling, faculty development, and surgical simulation. Contains 14 practice-oriented topics including development of competencies in oral and maxillofacial surgery training; artificial intelligence in oral and maxillofacial surgery education; role modeling, coaching and mentoring in residency education; surgical simulation training for the OMFS; and more. Provides in-depth clinical reviews on oral and maxillofacial surgery education, offering actionable insights for clinical practice. Presents the latest information on this timely, focused topic under the leadership of experienced editors in the field. Authors synthesize and distill the latest research and practice guidelines to create clinically significant, topic-based reviews.
Download or read book Biomaterials for Oral and Craniomaxillofacial Applications written by S. Deb and published by Karger Medical and Scientific Publishers. This book was released on 2015-07-30 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of the global population is affected by repair or replacement of craniofacial structures caused by tooth decay or loss as well as major craniofacial defects, necessitating complex tissue augmentation or regeneration procedures. As a result of exciting developments and the increasing number of novel biomaterials and different clinical applications, it is extremely important to understand these biomaterials and their design. This publication integrates the application of biomaterials science and describes the recent advances, the role of cutting-edge biomaterials in engineering oral tissues, surface modification technologies, the emerging field of nanomaterials and clinical translation showing future directions in oral and craniomaxillofacial health care. Researchers active in dental, medical and biomaterials sciences, oral and maxillofacial surgeons, dentists, tissue engineers as well as materials scientists will find valuable information on the latest progress and novel approaches as will all those who are looking for better solutions to the problems associated with facial deformities.
Download or read book Oral and Maxillofacial Surgery Inkling Enhanced E Book written by Raymond J Fonseca, DMD and published by Elsevier Health Sciences. This book was released on 2017-04-26 with total page 2721 pages. Available in PDF, EPUB and Kindle. Book excerpt: NEW! Full color design provides a more vivid depiction of pathologies, concepts, and procedures. NEW! Expert Consult website includes all of the chapters from the print text plus "classic" online-only chapters and an expanded image collection, references linked to PubMed, and periodic content updates. NEW! Thoroughly revised and reorganized content reflects current information and advances in OMS. NEW! New chapters on implants and orthognathic surgery cover the two areas where oral and maxillofacial surgeons have been expanding their practice. NEW! Digital formats are offered in addition to the traditional print text and provide on-the-go access via mobile tablets and smart phones.
Download or read book Innovations and New Developments in Craniomaxillofacial Reconstruction written by Julio Acero and published by Springer Nature. This book was released on 2021-07-07 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of the new technologies that are having a tremendous impact on the complex field of craniomaxillofacial reconstructive surgery. Readers will find detailed information on the technologies themselves, their indications, and their benefits. The coverage encompasses the use of biomaterials and tissue engineering, virtual planning and CAD/CAM techniques, the various applications of computer-assisted surgery, and intraoperative navigation. Robotic surgery, endoscopic approaches, and piezoelectric surgery are each addressed within individual chapters. New developments in craniofacial pediatric surgery are discussed, and the book concludes by examining the present and future of facial transplantation. The text is supported by numerous high-quality color illustrations, and the team of authors comprises prestigious international leaders in the specialty. The book will be of value for all who are interested in learning about the innovations and developments that are reducing morbidity and improving outcomes in patients who require craniomaxillofacial reconstruction.
Download or read book Minimally Invasive Oral and Maxillofacial Surgery written by Oded Nahlieli and published by Springer. This book was released on 2017-12-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minimally invasive techniques, designed to reduce morbidity and risk while simultaneously improving outcomes, are increasingly being used in oral and maxillofacial surgery. This book covers the most recent technological developments and the advanced techniques used when performing such minimally invasive surgery in patients with common and rare oral and maxillofacial pathologies. The relevant basic science is reviewed, but the principal focus is on the surgical techniques themselves. These are described step by step with the aid of numerous superb color illustrations that will help the clinician to gain a full understanding of the technology and the procedures. In addition, still emerging techniques of endoscopy, navigation, and minimally invasive surgery are well covered. This text will be a premier resource for physicians who diagnose and treat oral and maxillofacial pathologies and injuries.
Download or read book Digital Technologies for Craniomaxillofacial Surgery written by Alex M. Greenberg and published by Springer. This book was released on 2016-03-09 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital technologies are changing the way that surgeons operate. They are revolutionizing the ability of surgeons to visualize, plan, and create rapid prototyped models and patient- specific implants for the broad disciplines of ENT, plastic, oral and maxillofacial surgeons. This book provides information on the latest digital technologies available for craniomaxillofacial surgery, discussing how this technology allows for preplanned procedures with improved and superior outcomes. Rather than improvise during surgery, surgery and its procedures can be preconceptualized with superior outcomes and decreased patient morbidity.
Download or read book Contemporary Oral and Maxillofacial Surgery 7 e South Asia Edition E book written by James R. Hupp and published by Elsevier Health Sciences. This book was released on 2019-08-19 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: - NEW! Chapter, Anesthesia in Dentistry focuses on anesthesia in greater depth than any of the previous editions including local anesthesia and nitrous oxide sedation.
Download or read book Three Dimensional Imaging for Orthodontics and Maxillofacial Surgery written by Chung H. Kau and published by John Wiley & Sons. This book was released on 2011-06-09 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three Dimensional Imaging for Orthodontics and Maxillofacial Surgery is a major new specialist resource that identifies and applies the principles of three dimensional imaging to orthodontic practice. Readers are introduced to three-dimensional imaging, comparing it with the traditional two-dimensional assessments and exploring the benefits and drawbacks of these imaging modalities. Three Dimensional Imaging for Orthodontics and Maxillofacial Surgery centers on the appropriate application of three-dimensional imaging in the various practices related to orthodontic delivery and craniofacial surgery. The book guides the reader through detailed and illustrated examples of three-dimensional patient management in the context of daily practice. Both three-dimensional static and motion analyses are explored. The book also addresses growth, orthodontic treatment and surgical prediction, both static and dynamic and explores the use of morphing and finite element analyses with particular focus on surgical intervention. A key resource for specialist working in the fields of orthodontics and cranio-maxillofacial surgery. KEY FEATURES · Applies principles of 3D imaging to orthodontic practice · Surveys and analyzes current technologies and modalities, relating them to clinical usage · Companion website with motion images ( www.wiley.com/go/kau) · Richly illustrated in full color throughout · Brings together expert contributors for an international perspective
