Download or read book Emerging Converter Topologies and Control for Grid Connected Photovoltaic Systems written by Dmitri Vinnikov and published by MDPI. This book was released on 2021-02-26 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous cost reduction of photovoltaic (PV) systems and the rise of power auctions resulted in the establishment of PV power not only as a green energy source but also as a cost-effective solution to the electricity generation market. Various commercial solutions for grid-connected PV systems are available at any power level, ranging from multi-megawatt utility-scale solar farms to sub-kilowatt residential PV installations. Compared to utility-scale systems, the feasibility of small-scale residential PV installations is still limited by existing technologies that have not yet properly address issues like operation in weak grids, opaque and partial shading, etc. New market drivers such as warranty improvement to match the PV module lifespan, operation voltage range extension for application flexibility, and embedded energy storage for load shifting have again put small-scale PV systems in the spotlight. This Special Issue collects the latest developments in the field of power electronic converter topologies, control, design, and optimization for better energy yield, power conversion efficiency, reliability, and longer lifetime of the small-scale PV systems. This Special Issue will serve as a reference and update for academics, researchers, and practicing engineers to inspire new research and developments that pave the way for next-generation PV systems for residential and small commercial applications.

Download or read book Emerging Converter Topologies and Control for Grid Connected Photovoltaic Systems written by Dmitri Vinnikov and published by . This book was released on 2021 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous cost reduction of photovoltaic (PV) systems and the rise of power auctions resulted in the establishment of PV power not only as a green energy source but also as a cost-effective solution to the electricity generation market. Various commercial solutions for grid-connected PV systems are available at any power level, ranging from multi-megawatt utility-scale solar farms to sub-kilowatt residential PV installations. Compared to utility-scale systems, the feasibility of small-scale residential PV installations is still limited by existing technologies that have not yet properly address issues like operation in weak grids, opaque and partial shading, etc. New market drivers such as warranty improvement to match the PV module lifespan, operation voltage range extension for application flexibility, and embedded energy storage for load shifting have again put small-scale PV systems in the spotlight. This Special Issue collects the latest developments in the field of power electronic converter topologies, control, design, and optimization for better energy yield, power conversion efficiency, reliability, and longer lifetime of the small-scale PV systems. This Special Issue will serve as a reference and update for academics, researchers, and practicing engineers to inspire new research and developments that pave the way for next-generation PV systems for residential and small commercial applications.

Download or read book Advances in Grid Connected Photovoltaic Power Conversion Systems written by Yongheng Yang and published by Woodhead Publishing. This book was released on 2018-08-21 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Grid-Connected Photovoltaic Power Conversion Systems addresses the technological challenges of fluctuating and unreliable power supply in grid-connected photovoltaic (PV) systems to help students, researchers, and engineers work toward more PV installations in the grid to make society more sustainable and reliable while complying with grid regulations. The authors combine their extensive knowledge and experience in this book to address both the basics of the power electronic converter technology and the advances of such practical electric power conversion systems. This book includes extensive, step-by-step practical application examples to assist students and engineers to better understand the role of power electronics in modern PV applications and solve the practical issues in grid-connected PV systems. Offers a step-by-step modeling approach to solving the practical issues and technological challenges in grid-connected PV systems Provides practical application examples to assist the reader to better understand the role of power electronics in modern PV applications Extends to the most modern technologies for grid-friendly PV systems

Download or read book Emerging Power Converters for Renewable Energy and Electric Vehicles written by Md Rabiul Islam and published by CRC Press. This book was released on 2021-04-22 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers advancements of power electronic converters and their control techniques for grid integration of large-scale renewable energy sources and electrical vehicles. Major emphasis are on transformer-less direct grid integration, bidirectional power transfer, compensation of grid power quality issues, DC system protection and grounding, interaction in mixed AC/DC system, AC and DC system stability, magnetic design for high-frequency high power density systems with advanced soft magnetic materials, modelling and simulation of mixed AC/DC system, switching strategies for enhanced efficiency, and protection and reliability for sustainable grid integration. This book is an invaluable resource for professionals active in the field of renewable energy and power conversion.

Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Download or read book Modular Multilevel Converters written by Sixing Du and published by John Wiley & Sons. This book was released on 2018-02-22 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: An invaluable academic reference for the area of high-power converters, covering all the latest developments in the field High-power multilevel converters are well known in industry and academia as one of the preferred choices for efficient power conversion. Over the past decade, several power converters have been developed and commercialized in the form of standard and customized products that power a wide range of industrial applications. Currently, the modular multilevel converter is a fast-growing technology and has received wide acceptance from both industry and academia. Providing adequate technical background for graduate- and undergraduate-level teaching, this book includes a comprehensive analysis of the conventional and advanced modular multilevel converters employed in motor drives, HVDC systems, and power quality improvement. Modular Multilevel Converters: Analysis, Control, and Applications provides an overview of high-power converters, reference frame theory, classical control methods, pulse width modulation schemes, advanced model predictive control methods, modeling of ac drives, advanced drive control schemes, modeling and control of HVDC systems, active and reactive power control, power quality problems, reactive power, harmonics and unbalance compensation, modeling and control of static synchronous compensators (STATCOM) and unified power quality compensators. Furthermore, this book: Explores technical challenges, modeling, and control of various modular multilevel converters in a wide range of applications such as transformer and transformerless motor drives, high voltage direct current transmission systems, and power quality improvement Reflects the latest developments in high-power converters in medium-voltage motor drive systems Offers design guidance with tables, charts graphs, and MATLAB simulations Modular Multilevel Converters: Analysis, Control, and Applications is a valuable reference book for academic researchers, practicing engineers, and other professionals in the field of high power converters. It also serves well as a textbook for graduate-level students.

Download or read book Power Electronics for Photovoltaic Power Systems written by Mahinda Vilathgamuwa and published by Morgan & Claypool Publishers. This book was released on 2015-08-01 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world energy demand has been increasing in a rapid manner with the increase of population and rising standard of living. The world population has nearly doubled in the last 40 years from 3.7 billion people to the present 7 billion people. It is anticipated that world population will grow towards 8 billion around 2030. Furthermore, the conventional fossil fuel supplies become unsustainable as the energy demand in emerging big economies such as China and India would rise tremendously where the China will increase its energy demand by 75% and India by 100% in the next 25 years. With dwindling natural resources, many countries throughout the world have increasingly invested in renewable resources such as photovoltaics (PV) and wind. The world has seen immense growth in global photovoltaic power generation over the last few decades. For example, in Australia, renewable resources represented nearly 15% of total power generation in 2013. Among renewable resources, solar and wind account for 38% of generation. In near future, energy in the domestic and industrial sector will become ""ubiquitous"" where consumers would have multiple sources to get their energy. Another such prediction is that co-location of solar and electrical storage will see a rapid growth in global domestic and industrial sectors; conventional power companies, which dominate the electricity market, will face increasing challenges in maintaining their incumbent business models. The efficiency, reliability and cost-effectiveness of the power converters used to interface PV panels to the mains grid and other types of off-grid loads are of major concern in the process of system design. This book describes state-of-the-art power electronic converter topologies used in various PV power conversion schemes. This book aims to provide a reader with a wide variety of topologies applied in different circumstances so that the reader would be able to make an educated choice for a given application.

Download or read book Control of Power Electronic Converters and Systems written by Frede Blaabjerg and published by Academic Press. This book was released on 2021-04-01 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Power Electronic Converters and Systems, Volume 3, explores emerging topics in the control of power electronics and converters, including the theory behind control, and the practical operation, modeling, and control of basic power system models. This book introduces the most important controller design methods, including both analog and digital procedures. This reference explains the dynamic characterization of terminal behavior for converters, as well as preserving the stability and power quality of modern power systems. Useful for engineers in emerging applications of power electronic converters and those combining control design methods into different applications in power electronics technology. Addressing controller interactions - in light of increasing renewable energy integration and related challenges with stability and power quality - is becoming more frequent in power converters and passive components. Discusses different applications and their control in integrated renewable energy systems Introduces the most important controller design methods, both in analog and digital Describes different important applications to be used in future industrial products Explains the dynamic characterization of terminal behavior for converters

Download or read book Photovoltaic Power System written by Weidong Xiao and published by John Wiley & Sons. This book was released on 2017-05-05 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic Power System: Modelling, Design and Control is an essential reference with a practical approach to photovoltaic (PV) power system analysis and control. It systematically guides readers through PV system design, modelling, simulation, maximum power point tracking and control techniques making this invaluable resource to students and professionals progressing from different levels in PV power engineering. The development of this book follows the author's 15-year experience as an electrical engineer in the PV engineering sector and as an educator in academia. It provides the background knowledge of PV power system but will also inform research direction. Key features: Details modern converter topologies and a step-by-step modelling approach to simulate and control a complete PV power system. Introduces industrial standards, regulations, and electric codes for safety practice and research direction. Covers new classification of PV power systems in terms of the level of maximum power point tracking. Contains practical examples in designing grid-tied and standalone PV power systems. Matlab codes and Simulink models featured on a Wiley hosted book companion website.

Download or read book Advances in Power Systems and Energy Management written by Neeraj Priyadarshi and published by Springer Nature. This book was released on 2021-01-20 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select proceedings of the international conference ETAEERE 2020, and focuses on contemporary issues in energy management and energy efficiency in the context of power systems. The contents cover modeling, simulation and optimization based studies on topics like medium voltage BTB system, cost optimization of a ring frame unit in textile industry, rectenna for RF energy harvesting, ecology and energy dimension in infrastructural designs, study of AGC in two area hydro thermal power system, energy-efficient and reliable depth-based routing protocol for underwater wireless sensor network, and power line communication. This book can be beneficial for students, researchers as well as industry professionals.

Download or read book Advanced Power Electronics Converters for Future Renewable Energy Systems written by Neeraj Priyadarshi and published by CRC Press. This book was released on 2023-03-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book narrates an assessment of numerous advanced power converters employed on primitive phase to enhance the efficiency of power translation pertaining to renewable energy systems. It presents the mathematical modelling, analysis, and control of recent power converters topologies, namely, AC/DC, DC/DC, and DC/AC converters. Numerous advanced DC-DC Converters, namely, multi-input DC-DC Converter, Cuk, SEPIC, Zeta and so forth have been assessed mathematically using state space analysis applied with an aim to enhance power efficiency of renewable energy systems. The book: Explains various power electronics converters for different types of renewable energy sources Provides a review of the major power conversion topologies in one book Focuses on experimental analysis rather than simulation work Recommends usage of MATLAB, PSCAD, and PSIM simulation software for detailed analysis Includes DC-DC converters with reasonable peculiar power rating This book is aimed at researchers, graduate students in electric power engineering, power and industrial electronics, and renewable energy.

Download or read book Power Electronic Converters for Solar Photovoltaic Systems written by L. Ashok Kumar and published by Academic Press. This book was released on 2020-11-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronic Converters for Solar Photovoltaic Systems provides design and implementation procedures for power electronic converters and advanced controllers to improve standalone and grid environment solar photovoltaics performance. Sections cover performance and improvement of solar photovoltaics under various conditions with the aid of intelligent controllers, allowing readers to better understand the nuances of power electronic converters for renewable energy systems. With algorithm development and real-time implementation procedures, this reference is useful for those interested in power electronics for performance improvement in distributed energy resources, design of advanced controllers, and measurement of critical parameters surrounding renewable energy systems. By providing a complete solution for performance improvement in solar PV with novel control techniques, this book will appeal to researchers and engineers working in power electronic converters, renewable energy, and power quality. Includes simulation studies and photovoltaic performance analysis Uses case studies as a reference for design and research Covers different varieties of power converters, from fundamentals to implementation

Download or read book Power Electronics Converters and their Control for Renewable Energy Applications written by Arezki Fekik and published by Elsevier. This book was released on 2023-06-21 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Converters and their Control for Renewable Energy Applications provides information that helps to solve common challenges with power electronics converters, including loss by switching, heating of power switches, management of switching time, improvement of the quality of the signals delivered by power converters, and improvement of the quality of energy produced by renewable energy sources. This book is of interest to academics, researchers, and engineers in renewable energy, power systems, electrical engineering, electronics, and mechanical engineering. Includes important visual illustrations and imagery of concise circuit schematics and renewable energy applications Features a templated approach for step-by-step implementation of the new MPPT algorithm based on recent and intelligent techniques Provides methods for optimal harnessing of energy from renewable energy sources and converter topology synthesis

Download or read book Multilevel Inverters written by Ersan Kabalci and published by Academic Press. This book was released on 2021-03-27 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multilevel Inverters: Control Methods and Power Electronics Applications provides a suite of powerful control methods for conventional and emerging inverter topologies instrumentalized in power electronics applications. It introduces readers to the conventional pulse width modulation control of multilevel voltage source inverter topologies before moving through more advanced approaches including hysteresis control, proportional resonance control, and model predictive control. Later chapters survey the power electronics connection between device topologies and control methods, particularly focusing on conversion in renewable energy systems, electric vehicles, static VAR compensators and solid-state transformers. Examines modern design configurations for multilevel inverter controllers, emerging control methods, and their applications Presents detailed application examples of multilevel inverters deployed in modern and recent power electronic areas including renewable energy sources, electric vehicles, and grid management Discusses deployment and development of future power converter implementation

Download or read book Power Converters for Medium Voltage Networks written by Md. Rabiul Islam and published by Springer. This book was released on 2014-09-15 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines a number of topics, mainly in connection with advances in semiconductor devices and magnetic materials and developments in medium and large-scale renewable power plant technologies, grid integration techniques and new converter topologies, including advanced digital control systems for medium-voltage networks. The book’s individual chapters provide an extensive compilation of fundamental theories and in-depth information on current research and development trends, while also exploring new approaches to overcoming some critical limitations of conventional grid integration technologies. Its main objective is to present the design and implementation processes for medium-voltage converters, allowing the direct grid integration of renewable power plants without the need for step-up transformers.

Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.

Download or read book Power Electronics for Renewable Energy Systems Transportation and Industrial Applications written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2014-06-02 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compiles current research into the analysis and design of power electronic converters for industrial applications and renewable energy systems, presenting modern and future applications of power electronics systems in the field of electrical vehicles With emphasis on the importance and long-term viability of Power Electronics for Renewable Energy this book brings together the state of the art knowledge and cutting-edge techniques in various stages of research. The topics included are not currently available for practicing professionals and aim to enable the reader to directly apply the knowledge gained to their designs. The book addresses the practical issues of current and future electric and plug-in hybrid electric vehicles (PHEVs), and focuses primarily on power electronics and motor drives based solutions for electric vehicle (EV) technologies. Propulsion system requirements and motor sizing for EVs is discussed, along with practical system sizing examples. Key EV battery technologies are explained as well as corresponding battery management issues. PHEV power system architectures and advanced power electronics intensive charging infrastructures for EVs and PHEVs are detailed. EV/PHEV interface with renewable energy is described, with practical examples. This book explores new topics for further research needed world-wide, and defines existing challenges, concerns, and selected problems that comply with international trends, standards, and programs for electric power conversion, distribution, and sustainable energy development. It will lead to the advancement of the current state-of-the art applications of power electronics for renewable energy, transportation, and industrial applications and will help add experience in the various industries and academia about the energy conversion technology and distributed energy sources. Combines state of the art global expertise to present the latest research on power electronics and its application in transportation, renewable energy and different industrial applications Offers an overview of existing technology and future trends, with discussion and analysis of different types of converters and control techniques (power converters, high performance power devices, power system, high performance control system and novel applications) Systematic explanation to provide researchers with enough background and understanding to go deeper in the topics covered in the book