Download or read book Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller II written by Douglas Summerville and published by Springer Nature. This book was released on 2022-05-31 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG4/8 Hardware / Analog Input / Serial Communication / Real-Time I/O Processing

Download or read book Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller II written by Douglas Summerville and published by Morgan & Claypool Publishers. This book was released on 2009-10-08 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of computers in use today are encapsulated within other systems. In contrast to general-purpose computers that run an endless selection of software, these embedded computers are often programmed for a very specific, low-level and often mundane purpose. Low-end microcontrollers, costing as little as one dollar, are often employed by engineers in designs that utilize only a small fraction of the processing capability of the device because it is either more cost-effective than selecting an application-specific part or because programmability offers custom functionality not otherwise available. Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller is a two-part book intended to provide an introduction to hardware and software interfacing for engineers. Building from a comprehensive introduction of fundamental computing concepts, the book suitable for a first course in computer organization for electrical or computer engineering students with a minimal background in digital logic and programming. In addition, this book can be valuable as a reference for engineers new to the Freescale HCS08 family of microcontrollers. The HCS08 processor architecture used in the book is relatively simple to learn, powerful enough to apply towards a wide-range of interfacing tasks, and accommodates breadboard prototyping in a laboratory using freely available and low-cost tools. In Part II: Digital and Analog Hardware Interfacing, hardware and software interfacing concepts are introduced. The emphasis of this work is on good hardware and software engineering design principles. Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part. Table of Contents: Introduction to the MC9S08QG4/8 Hardware / Analog Input / Serial Communication / Real-Time I/O Processing

Download or read book Embedded Systems Interfacing for Engineers Using the Freescale HCS08 Microcontroller I written by Douglas H. Summerville and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller.

Download or read book Embedded Systems Interfacing for Engineers using the Freescale HCS08 Microcontroller I written by Douglas Summerville and published by Springer Nature. This book was released on 2022-06-01 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design

Download or read book Embedded Systems Interfacing for Engineers Using the Freescale HCS08 Microcontroller I written by Andrew Marshall and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Component variability, mismatch, and various noise effects are major contributors to design limitations in most modern IC processes. Mismatch and Noise in Modern IC Processes examines these related effects and how they affect the building block circuits of modern integrated circuits, from the perspective of a circuit designer. Variability usually refers to a large scale variation that can occur on a wafer to wafer and lot to lot basis, and over long distances on a wafer. This phenomenon is well understood and the effects of variability are included in most integrated circuit design with the use of corner or statistical component models. Mismatch, which is the emphasis of section I of the book, is a local level of variability that leaves the characteristics of adjacent transistors unmatched. This is of particular concern in certain analog and memory systems, but also has an effect on digital logic schemes, where uncertainty is introduced into delay times, which can reduce margins and introduce 'race' conditions. Noise is a dynamic effect that causes a local mismatch or variability that can vary during operation of a circuit, and is considered in section II. Noise can be the result of atomic effects in devices or circuit interactions, and both of these are discussed in terms of analog and digital circuitry. Table of Contents: Part I: Mismatch / Introduction / Variability and Mismatch in Digital Systems / Variability and Mismatch in Analog Systems I / Variability and Mismatch in Analog Systems II / Lifetime-Induced Variability / Mismatch in Nonconventional Processes / Mismatch Correction Circuits / Part II: Noise / Component and Digital Circuit Noise / Noise Effects in Digital Systems / Noise Effects in Analog Systems / Circuit Design to Minimize Noise Effects / Noise Considerations in SOI.

Download or read book Embedded Systems Interfacing for Engineers Using the Freescale HCS08 Microcontroller II written by Douglas H. Summerville and published by Morgan & Claypool Publishers. This book was released on 2009 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Device drivers are developed illustrating the use of general-purpose and special-purpose digital I/O interfaces, analog interfaces, serial interfaces and real-time I/O processing. The hardware side of each interface is described and electrical specifications and related issues are considered. The first part of the book provides the programming skills necessary to implement the software in this part.

Download or read book Embedded System Design with the Atmel AVR Microcontroller II written by Steven Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design

Download or read book Microcontroller Programming and Interfacing with Texas Instruments MSP430FR2433 and MSP430FR5994 written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-06-01 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430TM microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra-low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, software examples, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful. This second edition introduces the MSP–EXP430FR5994 and the MSP430–EXP430FR2433 LaunchPads. Both LaunchPads are equipped with a variety of peripherals and Ferroelectric Random Access Memory (FRAM). FRAM is a nonvolatile, low-power memory with functionality similar to flash memory.

Download or read book Microcontroller Programming and Interfacing TI MSP 430 PART II written by Steven F. Barrett and published by Springer Nature. This book was released on 2011-03-11 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.

Download or read book Embedded Systems Design with the Atmel AVR Microcontroller written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow on to a previously published book, titled "Atmel AVR Microcontroller Primer: Programming and Interfacing." Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller.

Download or read book Microcontroller Programming and Interfacing Texas Instruments MSP430 written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2011-05-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.

Download or read book Embedded System Design with the Atmel AVR Microcontroller written by Steven Barrett and published by Morgan & Claypool Publishers. This book was released on 2009-12-08 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design

Download or read book Embedded System Design with the Atmel AVR Microcontroller I written by Steven Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design

Download or read book Microcontroller Programming and Interfacing TI MSP 430 PART I written by Steven F. Barrett and published by Springer Nature. This book was released on 2011-03-11 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.

Download or read book Microcontroller Programming and Interfacing with Texas Instruments MSP430FR2433 and MSP430FR5994 Part I written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2019-08-27 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430TM microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra-low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, software examples, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful. This second edition introduces the MSP–EXP430FR5994 and the MSP430–EXP430FR2433 LaunchPads. Both LaunchPads are equipped with a variety of peripherals and Ferroelectric Random Access Memory (FRAM). FRAM is a nonvolatile, low-power memory with functionality similar to flash memory.

Download or read book Programming the ARM Cortex M4 based STM32F4 Microcontrollers with Simulink written by Farzin Asadi and published by Springer Nature. This book was released on 2022-05-31 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: A microcontroller is a compact, integrated circuit designed to govern a specific operation in an embedded system. A typical microcontroller includes a processor, memory, and input/output (I/O) peripherals on a single chip. When they first became available, microcontrollers solely used Assembly language. Today, the C programming language (and some other high-level languages) can be used as well. Some of advanced microcontrollers support another programming technique as well: Graphical programming. In graphical programming, the user does not write any code but draws the block diagram of the system he wants. Then a software converts the drawn block diagram into a suitable code for the target device. Programming microcontrollers using graphical programming is quite easier than programming in C or Assembly. You can implement a complex system within hours with graphical programming while its implementation in C may take months. These features make the graphical programming an important option for engineers. This book study the graphical programming of STM32F4 high-performance microcontrollers with the aid of Simulink\textregistered\ and Waijung blockset. Students of engineering (for instance, electrical, biomedical, mechatronics and robotic to name a few), engineers who work in industry, and anyone who want to learn the graphical programming of STM32F4 can benefit from this book. Prerequisite for this book is the basic knowledge of MATLABi\textregistered/Simulink\textregistered.

Download or read book Atmel AVR Microcontroller Primer written by Steven Barrett and published by Springer Nature. This book was released on 2012-06-25 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers a primer on the Atmel AVR microcontroller. In this second edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 kbytes. The second edition also adds a chapter on embedded system design fundamentals and provides extended examples on two different autonomous robots. Our approach is to provide the fundamental skills to quickly get up and operating with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to exercise the subsystem. In all examples, we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples. Table of Contents: Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog-to-Digital Conversion / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / Embedded Systems Design