Download or read book Embedded Systems Design and Applications with the 68HC12 and HCS12 written by Steven Frank Barrett and published by Prentice Hall. This book was released on 2005 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a second microprocessor course for students enrolled in Electrical/Computer Engineering Microcontroller courses. Designed for a senior- or graduate-level embedded systems design course, Embedded Systems Design and Applications with the 68HC12 introduces readers to unique issues associated with designing, testing, integrating, and implementing microcontroller/microprocessor-based embedded systems.

Download or read book Embedded Systems written by Barrett and published by Pearson Education India. This book was released on 2005 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embedded Systems Design with the Texas Instruments MSP432 32 bit Processor written by Dung Dang and published by Morgan & Claypool Publishers. This book was released on 2016-10-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.

Download or read book Embedded Systems Design with the Atmel AVR Microcontroller written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow on to a previously published book, titled "Atmel AVR Microcontroller Primer: Programming and Interfacing." Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller.

Download or read book Embedded Systems Design with the Texas Instruments MSP432 32 bit Processor written by Dung Dang and published by Springer Nature. This book was released on 2022-06-01 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.

Download or read book Embedded System Design written by Peter Marwedel and published by Springer. This book was released on 2017-07-26 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique feature of this textbook is to provide a comprehensive introduction to the fundamental knowledge in embedded systems, with applications in cyber-physical systems and the Internet of things. It starts with an introduction to the field and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, including real-time operating systems. The author also discusses evaluation and validation techniques for embedded systems and provides an overview of techniques for mapping applications to execution platforms, including multi-core platforms. Embedded systems have to operate under tight constraints and, hence, the book also contains a selected set of optimization techniques, including software optimization techniques. The book closes with a brief survey on testing. This third edition has been updated and revised to reflect new trends and technologies, such as the importance of cyber-physical systems and the Internet of things, the evolution of single-core processors to multi-core processors, and the increased importance of energy efficiency and thermal issues.

Download or read book Embedded System Design with the Atmel AVR Microcontroller I written by Steven Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design

Download or read book Embedded Systems Design with 8051 Microcontrollers written by Zdravko Karakehayov and published by CRC Press. This book was released on 2018-10-08 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of developments in microcontroller technology, providing lucid instructions on its many and varied applications. It focuses on the popular eight-bit microcontroller, the 8051, and the 83C552. The text outlines a systematic methodology for small-scale, control-dominated embedded systems, and is accompanied by a disk of all the example problems included in the book.

Download or read book Embedded Systems Design written by Steve Heath and published by Elsevier. This book was released on 2002-10-30 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition the latest ARM processors and other hardware developments are fully covered along with new sections on Embedded Linux and the new freeware operating system eCOS. The hot topic of embedded systems and the internet is also introduced. In addition a fascinating new case study explores how embedded systems can be developed and experimented with using nothing more than a standard PC. * A practical introduction to the hottest topic in modern electronics design * Covers hardware, interfacing and programming in one book * New material on Embedded Linux for embedded internet systems

Download or read book Bad to the Bone written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-11-10 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides detailed materials for both novice and experienced programmers using all BeagleBone variants which host a powerful 32-bit, super-scalar TI Sitara ARM Cortex A8 processor. Authored by Steven F. Barrett and Jason Kridner, a seasoned ECE educator along with the founder of Beagleboard.org, respectively, the work may be used in a wide variety of projects from science fair projects to university courses and senior design projects to first prototypes of very complex systems. Beginners may access the power of the "Bone" through the user-friendly Bonescript examples. Seasoned users may take full advantage of the Bone's power using the underlying Linux-based operating system, a host of feature extension boards (Capes) and a wide variety of Linux community open source libraries. The book contains background theory on system operation coupled with many well-documented, illustrative examples. Examples for novice users are centered on motivational, fun robot projects while advanced projects follow the theme of assistive technology and image processing applications.

Download or read book Design of Embedded Systems Using 68HC12 11 Microcontrollers written by Richard E. Haskell and published by . This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEATURES/BENEFITS *A bridge between the 68HC12 and the 68HC11 - Focuses on the 68HC12, but includes material for (and provides software for) the older 68HC11. *A new version of Forth - WHYP (Words to Help You Program) - designed for use in embedded systems. WHYP can easily be installed on any 68HC12 system, including the most popular development boards from Motorola and Axiom Manufacturing. It consists of two parts-some 68HC12 subroutines that reside on the target system (typically an evaluation board) and a C++ program that runs on a PC and communicates with the 68HC12 target system through a serial line. It is a sub-routine threaded language, which means that WHYP words are just the names of 68HC12(11) subroutines. New WHYP words can be defined simply by stringing previously defined WHYP words together. The first five chapters of the text explain how to make the programming of the 68HC12 simple and interactive, and in the process develops the entire WHYP language from scratch, step by step. (The software is provided on disk with the text, and the latest versions of the software will be available on the authors web site.) *An abundance of worked examples and many chapter-end exerc

Download or read book Bad to the Bone written by Steven Barrett and published by Springer Nature. This book was released on 2022-06-01 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: BeagleBone Black is a low-cost, open hardware computer uniquely suited to interact with sensors and actuators directly and over the Web. Introduced in April 2013 by BeagleBoard.org, a community of developers first established in early 2008, BeagleBone Black is used frequently to build vision-enabled robots, home automation systems, artistic lighting systems, and countless other do-it-yourself and professional projects. BeagleBone variants include the original BeagleBone and the newer BeagleBone Black, both hosting a powerful 32-bit, super-scalar ARM Cortex A8 processor capable of running numerous mobile and desktop-capable operating systems, typically variants of Linux including Debian, Android, and Ubuntu. Yet, BeagleBone is small enough to fit in a small mint tin box. The "Bone" may be used in a wide variety of projects from middle school science fair projects to senior design projects to first prototypes of very complex systems. Novice users may access the power of the Bone through the user-friendly BoneScript software, experienced through a Web browser in most major operating systems, including Microsoft Windows, Apple Mac OS X, or the Linux operating systems. Seasoned users may take full advantage of the Bone's power using the underlying Linux-based operating system, a host of feature extension boards (Capes) and a wide variety of Linux community open source libraries. This book provides an introduction to this powerful computer and has been designed for a wide variety of users including the first time novice through the seasoned embedded system design professional. The book contains background theory on system operation coupled with many well-documented, illustrative examples. Examples for novice users are centered on motivational, fun robot projects while advanced projects follow the theme of assistive technology and image-processing applications.

Download or read book Microcontroller Programming and Interfacing with Texas Instruments MSP430FR2433 and MSP430FR5994 Part I written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2019-08-27 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430TM microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra-low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, software examples, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful. This second edition introduces the MSP–EXP430FR5994 and the MSP430–EXP430FR2433 LaunchPads. Both LaunchPads are equipped with a variety of peripherals and Ferroelectric Random Access Memory (FRAM). FRAM is a nonvolatile, low-power memory with functionality similar to flash memory.

Download or read book Microcontroller Programming and Interfacing with Texas Instruments MSP430FR2433 and MSP430FR5994 written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-06-01 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430TM microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra-low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, software examples, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful. This second edition introduces the MSP–EXP430FR5994 and the MSP430–EXP430FR2433 LaunchPads. Both LaunchPads are equipped with a variety of peripherals and Ferroelectric Random Access Memory (FRAM). FRAM is a nonvolatile, low-power memory with functionality similar to flash memory.

Download or read book Microchip AVR Microcontroller Primer written by Steven F. Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers a primer on the Microchip AVR® microcontroller. The revised title of this book reflects the 2016 Microchip Technology acquisition of Atmel Corporation. In this third edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 KB. The third edition also provides an update on Atmel Studio, programming with a USB pod, the gcc compiler, the ImageCraft JumpStart C for AVR compiler, the Two-Wire Interface (TWI), and multiple examples at both the subsystem and system level. Our approach is to provide readers with the fundamental skills to quickly set up and operate with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to operate the subsystem. In all examples, we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples including a special effects light-emitting diode cube, autonomous robots, a multi-function weather station, and a motor speed control system.

Download or read book Microcontroller Programming and Interfacing TI MSP 430 PART II written by Steven F. Barrett and published by Springer Nature. This book was released on 2011-03-11 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.

Download or read book Microcontroller Programming and Interfacing Texas Instruments MSP430 written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2011-05-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.