Download or read book Embedded Systems An Integrated Approach written by LyLa B. Das and published by Pearson Education India. This book was released on 2012 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems: An Integrated Approach is exclusively designed for the undergraduate courses in electronics and communication engineering as well as computer science engineering. This book is well-structured and covers all the important processors and their applications in a sequential manner. It begins with a highlight on the building blocks of the embedded systems, moves on to discuss the software aspects and new processors and finally concludes with an insightful study of important applications. This book also contains an entire part dedicated to the ARM processor, its software requirements and the programming languages. Relevant case studies and examples supplement the main discussions in the text.
Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.
Download or read book Embedded Systems Architecture written by Tammy Noergaard and published by Newnes. This book was released on 2012-12-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system's architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed 'big picture' for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. - Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! - Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package - Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more - A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering - Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume - Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website
Download or read book Embedded Software Development written by Ivan Cibrario Bertolotti and published by CRC Press. This book was released on 2017-12-19 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Software Development: The Open-Source Approach delivers a practical introduction to embedded software development, with a focus on open-source components. This programmer-centric book is written in a way that enables even novice practitioners to grasp the development process as a whole. Incorporating real code fragments and explicit, real-world open-source operating system references (in particular, FreeRTOS) throughout, the text: Defines the role and purpose of embedded systems, describing their internal structure and interfacing with software development tools Examines the inner workings of the GNU compiler collection (GCC)-based software development system or, in other words, toolchain Presents software execution models that can be adopted profitably to model and express concurrency Addresses the basic nomenclature, models, and concepts related to task-based scheduling algorithms Shows how an open-source protocol stack can be integrated in an embedded system and interfaced with other software components Analyzes the main components of the FreeRTOS Application Programming Interface (API), detailing the implementation of key operating system concepts Discusses advanced topics such as formal verification, model checking, runtime checks, memory corruption, security, and dependability Embedded Software Development: The Open-Source Approach capitalizes on the authors’ extensive research on real-time operating systems and communications used in embedded applications, often carried out in strict cooperation with industry. Thus, the book serves as a springboard for further research.
Download or read book Embedded System Design written by Frank Vahid and published by John Wiley & Sons. This book was released on 2001-10-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
Download or read book Embedded System Interfacing written by Marilyn Wolf and published by Morgan Kaufmann. This book was released on 2019-02-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Interfacing: Design for the Internet-of-Things (IoT) and Cyber-Physical Systems (CPS) takes a comprehensive approach to the interface between embedded systems and software. It provides the principles needed to understand how digital and analog interfaces work and how to design new interfaces for specific applications. The presentation is self-contained and practical, with discussions based on real-world components. Design examples are used throughout the book to illustrate important concepts. This book is a complement to the author's Computers as Components, now in its fourth edition, which concentrates on software running on the CPU, while Embedded System Interfacing explains the hardware surrounding the CPU. - Provides a comprehensive background in embedded system interfacing techniques - Includes design examples to illustrate important concepts and serve as the basis for new designs - Discusses well-known, widely available hardware components and computer-aided design tools
Download or read book Embedded Systems and Computer Architecture written by Graham R Wilson and published by Elsevier. This book was released on 2001-12-17 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author has taught the design and use of microprocessor systems to undergraduate and technician level students for over 25 years. - A core text for academic modules on microprocessors, embedded systems and computer architecture - A practical design-orientated approach
Download or read book Programming Embedded Systems written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 2006-10-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.
Download or read book Demystifying Embedded Systems Middleware written by Tammy Noergaard and published by Elsevier. This book was released on 2010-11-04 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical technical guide to embedded middleware implementation offers a coherent framework that guides readers through all the key concepts necessary to gain an understanding of this broad topic. Big picture theoretical discussion is integrated with down-to-earth advice on successful real-world use via step-by-step examples of each type of middleware implementation. Technically detailed case studies bring it all together, by providing insight into typical engineering situations readers are likely to encounter. Expert author Tammy Noergaard keeps explanations as simple and readable as possible, eschewing jargon and carefully defining acronyms. The start of each chapter includes a "setting the stage" section, so readers can take a step back and understand the context and applications of the information being provided. Core middleware, such as networking protocols, file systems, virtual machines, and databases; more complex middleware that builds upon generic pieces, such as MOM, ORB, and RPC; and integrated middleware software packages, such as embedded JVMs, .NET, and CORBA packages are all demystified. - Embedded middleware theory and practice that will get your knowledge and skills up to speed - Covers standards, networking, file systems, virtual machines, and more - Get hands-on programming experience by starting with the downloadable open source code examples from book website
Download or read book Embedded Controller Hardware Design written by Ken Arnold and published by Newnes. This book was released on 2001 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of electronics fundamentals -- Microcontroller concepts -- Worst-case timing, loading, analysis, and design -- Memory technologies and interfacing -- CPU bus interface and timing -- A detailed design example -- Programmable logic devices -- Basic I/O interfaces -- Other interfaces and bus cycles -- Other useful stuff -- Other interfaces.
Download or read book Embedded System Development Process written by Roger Hu and published by . This book was released on 2021-01-19 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost each and every electronic gadget around us is an embedded system, for example: Smart phone, palmtop, digital watch, digital camera, printer, scanner, washer machine control panel, home security system, and many more. Embedded systems have revolutionized our society into a digital world due to the fact that they are microcontroller-based, compact in sizes, reliable in performance, and cheaper in cost. Book ContentsThis book will assist you to learn about embedded systems, its design and development process. Four serial phases: plan, design, integrated development (ID), design verification and validation (DV&V) are presented and discussed in this book.This book begins by introducing what the embedded system basics are. Chapter 1 present classification and aspect of embedded systems, describes embedded systems' hardware and software characteristics. Then it is continued by chapter 2 to depict a time-task span of the embedded system product development process.Chapter 3, 4, 5, and 6, each describes the four phases of the design and development process respectively, which are Plan (Chapter 3), Design (chapter 4), Integrated Development (Chapter 5), Design Verification and Validation (Chapter 6). Plan phase (Chapter 3) describes product requirement, cost analysis, development strategy, management plan, development methodology, design tools and equipment.Design phase (Chapter 4) go over each design process flows, and present descriptions on: hardware board design process, hardware PCB design process, signal integrity analysis and simulation, software design process, and FPGA design process.Integrated Development phase (Chapter 5) discuss on: mechanical and PCB preparations, parts acquisition, FPGA preparation, PCB assembly, hardware testing and debug, hardware/software integrated development, and virtual prototype.Design Verification and Validation phase (Chapter 6) present appearance inspection, functional testing, characteristics and measurements, performance testing, and ESD, EMC, safety testing.Appendixes in this book provide tables and descriptions on hardware and software design checklists, guidelines, and development tools for reference. Bold texts in the paragraphs shall represent a development process name, phase name, step name, or a term of the glossary, or an emphasis.Audience: This book is intentionally written for following audience: -Managers and team leaders who need to manage and guide embedded system design and development process effectively.-Engineers and technicians who want to speed up and optimize embedded system design and development process.-New graduates and students who want to study and learn embedded system design and development process.-Interested readers who want explore embedded system design and development process.
Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.
Download or read book The Art of Designing Embedded Systems written by Jack Ganssle and published by Newnes. This book was released on 2008-07-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jack Ganssle has been forming the careers of embedded engineers for 20+ years. He has done this with four books, over 500 articles, a weekly column, and continuous lecturing. Technology moves fast and since the first edition of this best-selling classic much has changed. The new edition will reflect the author's new and ever evolving philosophy in the face of new technology and realities. Now more than ever an overarching philosophy of development is needed before just sitting down to build an application. Practicing embedded engineers will find that Jack provides a high-level strategic plan of attack to the often times chaotic and ad hoc design and development process. He helps frame and solve the issues an engineer confronts with real-time code and applications, hardware and software coexistences, and streamlines detail management. CONTENTS: Chapter 1 - IntroductionChapter 2 – The ProjectChapter 3 – The CodeChapter 4 – Real TimeChapter 5 – The Real WorldChapter 6 – Disciplined DevelopmentAppendix A – A Firmware StandardAppendix B - A Simple Drawing SystemAppendix C – A Boss's Guide to Process - Authored by Jack Ganssle, Tech Editor of Embedded Systems Programming and weekly column on embedded.com - Keep schedules in check as projects and codes grow by taking time to understand the project beforehand - Understand how cost/benefit coexists with design and development
Download or read book A Hands On Guide to Designing Embedded Systems written by Adam Taylor and published by Artech House. This book was released on 2021-10-31 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical resource introduces readers to the design of field programmable gate array systems (FPGAs). Techniques and principles that can be applied by the engineer to understand challenges before starting a project are presented. The book provides a framework from which to work and approach development of embedded systems that will give readers a better understanding of the issues at hand and can develop solution which presents lower technical and programmatic risk and a faster time to market. Programmatic and system considerations are introduced, providing an overview of the engineering life cycle when developing an electronic solution from concept to completion. Hardware design architecture is discussed to help develop an architecture to meet the requirements placed upon it, and the trade-offs required to achieve the budget. The FPGA development lifecycle and the inputs and outputs from each stage, including design, test benches, synthesis, mapping, place and route and power estimation, are also presented. Finally, the importance of reliability, why it needs to be considered, the current standards that exist, and the impact of not considering this is explained. Written by experts in the field, this is the first book by “engineers in the trenches” that presents FPGA design on a practical level.
Download or read book Handbook of Research on Embedded Systems Design written by Bagnato, Alessandra and published by IGI Global. This book was released on 2014-06-30 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: As real-time and integrated systems become increasingly sophisticated, issues related to development life cycles, non-recurring engineering costs, and poor synergy between development teams will arise. The Handbook of Research on Embedded Systems Design provides insights from the computer science community on integrated systems research projects taking place in the European region. This premier references work takes a look at the diverse range of design principles covered by these projects, from specification at high abstraction levels using standards such as UML and related profiles to intermediate design phases. This work will be invaluable to designers of embedded software, academicians, students, practitioners, professionals, and researchers working in the computer science industry.
Download or read book Embedded Linux Primer written by Christopher Hallinan and published by Pearson Education. This book was released on 2010-10-26 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-the-Minute, Complete Guidance for Developing Embedded Solutions with Linux Linux has emerged as today’s #1 operating system for embedded products. Christopher Hallinan’s Embedded Linux Primer has proven itself as the definitive real-world guide to building efficient, high-value, embedded systems with Linux. Now, Hallinan has thoroughly updated this highly praised book for the newest Linux kernels, capabilities, tools, and hardware support, including advanced multicore processors. Drawing on more than a decade of embedded Linux experience, Hallinan helps you rapidly climb the learning curve, whether you’re moving from legacy environments or you’re new to embedded programming. Hallinan addresses today’s most important development challenges and demonstrates how to solve the problems you’re most likely to encounter. You’ll learn how to build a modern, efficient embedded Linux development environment, and then utilize it as productively as possible. Hallinan offers up-to-date guidance on everything from kernel configuration and initialization to bootloaders, device drivers to file systems, and BusyBox utilities to real-time configuration and system analysis. This edition adds entirely new chapters on UDEV, USB, and open source build systems. Tour the typical embedded system and development environment and understand its concepts and components. Understand the Linux kernel and userspace initialization processes. Preview bootloaders, with specific emphasis on U-Boot. Configure the Memory Technology Devices (MTD) subsystem to interface with flash (and other) memory devices. Make the most of BusyBox and latest open source development tools. Learn from expanded and updated coverage of kernel debugging. Build and analyze real-time systems with Linux. Learn to configure device files and driver loading with UDEV. Walk through detailed coverage of the USB subsystem. Introduces the latest open source embedded Linux build systems. Reference appendices include U-Boot and BusyBox commands.
Download or read book Embedded Systems Design with the Atmel AVR Microcontroller written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow on to a previously published book, titled "Atmel AVR Microcontroller Primer: Programming and Interfacing." Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller.
