Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Real Time Concepts for Embedded Systems written by Qing Li and published by CRC Press. This book was released on 2003-01-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: '... a very good balance between the theory and practice of real-time embedded system designs.' —Jun-ichiro itojun Hagino, Ph.D., Research Laboratory, Internet Initiative Japan Inc., IETF IPv6 Operations Working Group (v6ops) co-chair 'A cl

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book An Embedded Software Primer written by David E. Simon and published by Addison-Wesley Professional. This book was released on 1999 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simon introduces the broad range of applications for embedded software and then reviews each major issue facing developers, offering practical solutions, techniques, and good habits that apply no matter which processor, real-time operating systems, methodology, or application is used.

Download or read book Software Engineering for Embedded Systems written by Robert Oshana and published by Newnes. This book was released on 2013-04-01 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Expert Guide gives you the techniques and technologies in software engineering to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when using software engineering methods to develop your embedded systems. With this book you will learn: The principles of good architecture for an embedded system Design practices to help make your embedded project successful Details on principles that are often a part of embedded systems, including digital signal processing, safety-critical principles, and development processes Techniques for setting up a performance engineering strategy for your embedded system software How to develop user interfaces for embedded systems Strategies for testing and deploying your embedded system, and ensuring quality development processes Practical techniques for optimizing embedded software for performance, memory, and power Advanced guidelines for developing multicore software for embedded systems How to develop embedded software for networking, storage, and automotive segments How to manage the embedded development process Includes contributions from: Frank Schirrmeister, Shelly Gretlein, Bruce Douglass, Erich Styger, Gary Stringham, Jean Labrosse, Jim Trudeau, Mike Brogioli, Mark Pitchford, Catalin Dan Udma, Markus Levy, Pete Wilson, Whit Waldo, Inga Harris, Xinxin Yang, Srinivasa Addepalli, Andrew McKay, Mark Kraeling and Robert Oshana. Road map of key problems/issues and references to their solution in the text Review of core methods in the context of how to apply them Examples demonstrating timeless implementation details Short and to- the- point case studies show how key ideas can be implemented, the rationale for choices made, and design guidelines and trade-offs

Download or read book Designing Embedded Hardware written by John Catsoulis and published by "O'Reilly Media, Inc.". This book was released on 2005-05-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded computer systems literally surround us: they're in our cell phones, PDAs, cars, TVs, refrigerators, heating systems, and more. In fact, embedded systems are one of the most rapidly growing segments of the computer industry today.Along with the growing list of devices for which embedded computer systems are appropriate, interest is growing among programmers, hobbyists, and engineers of all types in how to design and build devices of their own. Furthermore, the knowledge offered by this book into the fundamentals of these computer systems can benefit anyone who has to evaluate and apply the systems.The second edition of Designing Embedded Hardware has been updated to include information on the latest generation of processors and microcontrollers, including the new MAXQ processor. If you're new to this and don't know what a MAXQ is, don't worry--the book spells out the basics of embedded design for beginners while providing material useful for advanced systems designers.Designing Embedded Hardware steers a course between those books dedicated to writing code for particular microprocessors, and those that stress the philosophy of embedded system design without providing any practical information. Having designed 40 embedded computer systems of his own, author John Catsoulis brings a wealth of real-world experience to show readers how to design and create entirely new embedded devices and computerized gadgets, as well as how to customize and extend off-the-shelf systems.Loaded with real examples, this book also provides a roadmap to the pitfalls and traps to avoid. Designing Embedded Hardware includes: The theory and practice of embedded systems Understanding schematics and data sheets Powering an embedded system Producing and debugging an embedded system Processors such as the PIC, Atmel AVR, and Motorola 68000-series Digital Signal Processing (DSP) architectures Protocols (SPI and I2C) used to add peripherals RS-232C, RS-422, infrared communication, and USB CAN and Ethernet networking Pulse Width Monitoring and motor control If you want to build your own embedded system, or tweak an existing one, this invaluable book gives you the understanding and practical skills you need.

Download or read book Programming Embedded Systems in C and C written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 1999 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces embedded systems to C and C++ programmers. Topics include testing memory devices, writing and erasing flash memory, verifying nonvolatile memory contents, controlling on-chip peripherals, device driver design and implementation, and more.

Download or read book Embedded Systems Security written by David Kleidermacher and published by Elsevier. This book was released on 2012-03-16 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Front Cover; Dedication; Embedded Systems Security: Practical Methods for Safe and Secure Softwareand Systems Development; Copyright; Contents; Foreword; Preface; About this Book; Audience; Organization; Approach; Acknowledgements; Chapter 1 -- Introduction to Embedded Systems Security; 1.1What is Security?; 1.2What is an Embedded System?; 1.3Embedded Security Trends; 1.4Security Policies; 1.5Security Threats; 1.6Wrap-up; 1.7Key Points; 1.8 Bibliography and Notes; Chapter 2 -- Systems Software Considerations; 2.1The Role of the Operating System; 2.2Multiple Independent Levels of Security.

Download or read book Building Embedded Systems written by Changyi Gu and published by Apress. This book was released on 2016-05-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop the software and hardware you never think about. We're talking about the nitty-gritty behind the buttons on your microwave, inside your thermostat, inside the keyboard used to type this description, and even running the monitor on which you are reading it now. Such stuff is termed embedded systems, and this book shows how to design and develop embedded systems at a professional level. Because yes, many people quietly make a successful career doing just that. Building embedded systems can be both fun and intimidating. Putting together an embedded system requires skill sets from multiple engineering disciplines, from software and hardware in particular. Building Embedded Systems is a book about helping you do things in the right way from the beginning of your first project: Programmers who know software will learn what they need to know about hardware. Engineers with hardware knowledge likewise will learn about the software side. Whatever your background is, Building Embedded Systems is the perfect book to fill in any knowledge gaps and get you started in a career programming for everyday devices. Author Changyi Gu brings more than fifteen years of experience in working his way up the ladder in the field of embedded systems. He brings knowledge of numerous approaches to embedded systems design, including the System on Programmable Chips (SOPC) approach that is currently growing to dominate the field. His knowledge and experience make Building Embedded Systems an excellent book for anyone wanting to enter the field, or even just to do some embedded programming as a side project. What You Will Learn Program embedded systems at the hardware level Learn current industry practices in firmware development Develop practical knowledge of embedded hardware options Create tight integration between software and hardware Practice a work flow leading to successful outcomes Build from transistor level to the system level Make sound choices between performance and cost Who This Book Is For Embedded-system engineers and intermediate electronics enthusiasts who are seeking tighter integration between software and hardware. Those who favor the System on a Programmable Chip (SOPC) approach will in particular benefit from this book. Students in both Electrical Engineering and Computer Science can also benefit from this book and the real-life industry practice it provides.

Download or read book Design Patterns for Embedded Systems in C written by Bruce Powel Douglass and published by Elsevier. This book was released on 2010-11-03 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recent survey stated that 52% of embedded projects are late by 4-5 months. This book can help get those projects in on-time with design patterns. The author carefully takes into account the special concerns found in designing and developing embedded applications specifically concurrency, communication, speed, and memory usage. Patterns are given in UML (Unified Modeling Language) with examples including ANSI C for direct and practical application to C code. A basic C knowledge is a prerequisite for the book while UML notation and terminology is included. General C programming books do not include discussion of the contraints found within embedded system design. The practical examples give the reader an understanding of the use of UML and OO (Object Oriented) designs in a resource-limited environment. Also included are two chapters on state machines. The beauty of this book is that it can help you today. . Design Patterns within these pages are immediately applicable to your project Addresses embedded system design concerns such as concurrency, communication, and memory usage Examples contain ANSI C for ease of use with C programming code

Download or read book Embedded Systems Architecture written by Tammy Noergaard and published by Newnes. This book was released on 2012-12-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system’s architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed ‘big picture’ for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website

Download or read book Embedded Systems Dictionary written by Jack Ganssle and published by CRC Press. This book was released on 2003-01-04 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This technical dictionary defines the 2,500 most-used words in the embedded systems field, with over 4,500 entries and cross-references. Designed to serve both the technical and non-technical audience, this book defines advanced terms in two steps. The fi

Download or read book Real Time UML Workshop for Embedded Systems written by Bruce Powel Douglass and published by Elsevier. This book was released on 2011-04-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical new book provides much-needed, practical, hands-on experience capturing analysis and design in UML. It holds the hands of engineers making the difficult leap from developing in C to the higher-level and more robust Unified Modeling Language, thereby supporting professional development for engineers looking to broaden their skill-sets in order to become more saleable in the job market. It provides a laboratory environment through a series of progressively more complex exercises that act as building blocks, illustrating the various aspects of UML and its application to real-time and embedded systems. With its focus on gaining proficiency, it goes a significant step beyond basic UML overviews, providing both comprehensive methodology and the best level of supporting exercises available on the market. Each exercise has a matching solution which is thoroughly explained step-by-step in the back of the book. The techniques used to solve these problems come from the author’s decades of experience designing and constructing real-time systems. After the exercises have been successfully completed, the book will act as a desk reference for engineers, reminding them of how many of the problems they face in their designs can be solved. Tutorial style text with keen focus on in-depth presentation and solution of real-world example problems Highly popular, respected and experienced author

Download or read book Embedded Systems Design using the MSP430FR2355 LaunchPadTM written by Brock J. LaMeres and published by Springer Nature. This book was released on 2020-06-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. LEARN BY EXAMPLE – This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing. LEARN BY DOING – This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn. LEARN BOTH ASSEMBLY AND C – The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to “make things work”. BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.

Download or read book Introduction to Embedded Systems written by Manuel Jiménez and published by Springer Science & Business Media. This book was released on 2013-09-11 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook serves as an introduction to the subject of embedded systems design, using microcontrollers as core components. It develops concepts from the ground up, covering the development of embedded systems technology, architectural and organizational aspects of controllers and systems, processor models, and peripheral devices. Since microprocessor-based embedded systems tightly blend hardware and software components in a single application, the book also introduces the subjects of data representation formats, data operations, and programming styles. The practical component of the book is tailored around the architecture of a widely used Texas Instrument’s microcontroller, the MSP430 and a companion web site offers for download an experimenter’s kit and lab manual, along with Powerpoint slides and solutions for instructors.

Download or read book Dependable Embedded Systems written by Jörg Henkel and published by Springer Nature. This book was released on 2020-12-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems.