Download or read book Embedded Mechatronic Systems written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2019-11-26 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives.The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Provides a statistical approach to design optimization through reliability Presents an experimental approach for the characterization of the development of mechatronic systems in operating mode Analyzes new tools that effect thermal, vibratory, humidity, electric and electromagnetic stresses

Download or read book Embedded Mechatronic Systems Volume 2 written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2015-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests.

Download or read book Embedded Mechatronic Systems 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2020-02-28 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms

Download or read book Embedded Mechatronic Systems Volume 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2015-07-16 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests. Find and develop ways to characterize and validate the design robustness and reliability of complex mechatronic devices Develop ways to characterize physical and chemical phenomena, Identify mechanisms of failure of components of these devices, Analyze the physical and / or chemical mechanisms of failure, in order of importance To model failure mechanisms and design optimization.

Download or read book Embedded Mechatronic Systems written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2019-12-15 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives. The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Embedded Mechatronic Systems 1, Second Edition presents two methodologies: the statistical approach to the design optimization by reliability and the experimental approach for the characterization of the development of mechatronic systems in operating mode. It also analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses. Presents a statistical approach to the design optimization by reliability It presents an experimental approach for the characterization of the development of mechatronic systems in operating mode The book analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses

Download or read book Mechatronic System Control Logic and Data Acquisition written by Robert H. Bishop and published by CRC Press. This book was released on 2017-12-19 with total page 701 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive and up-to-date reference on mechatronics, Robert Bishop's The Mechatronics Handbook was quickly embraced as the gold standard in the field. With updated coverage on all aspects of mechatronics, The Mechatronics Handbook, Second Edition is now available as a two-volume set. Each installment offers focused coverage of a particular area of mechatronics, supplying a convenient and flexible source of specific information. This seminal work is still the most exhaustive, state-of-the-art treatment of the field available. Focusing on the most rapidly changing areas of mechatronics, this book discusses signals and systems control, computers, logic systems, software, and data acquisition. It begins with coverage of the role of control and the role modeling in mechatronic design, setting the stage for the more fundamental discussions on signals and systems. The volume reflects the profound impact the development of not just the computer, but the microcomputer, embedded computers, and associated information technologies and software advances. The final sections explore issues surrounding computer software and data acquisition. Covers modern aspects of control design using optimization techniques from H2 theory Discusses the roles of adaptive and nonlinear control and neural networks and fuzzy systems Includes discussions of design optimization for mechatronic systems and real-time monitoring and control Focuses on computer hardware and associated issues of logic, communication, networking, architecture, fault analysis, embedded computers, and programmable logic controllers

Download or read book Advances in Mechanical and Electronic Engineering written by David Jin and published by Springer Science & Business Media. This book was released on 2012-06-26 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the volume 2 of the proceedings of the 2012 International Conference on Mechanical and Electronic Engineering(ICMEE2012), held at June 23-24,2012 in Hefei, China. The conference provided a rare opportunity to bring together worldwide researchers who are working in the fields. This volume 2 is focusing on Mechatronic Engineering and Technology, Electronic Engineering and Electronic Information Technology .

Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by . This book was released on 2018 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.

Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by Control, Robotics and Sensors. This book was released on 2019-01-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial machines, automobiles, airplanes, robots, and machines are among the myriad possible hosts of embedded systems. This book has been prepared for those who seek to easily develop and design embedded systems for control purposes in robotic vehicles.

Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.

Download or read book The Mechatronics Handbook Second Edition 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2002-02-26 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has evolved into a way of life in engineering practice, and indeed pervades virtually every aspect of the modern world. As the synergistic integration of mechanical, electrical, and computer systems, the successful implementation of mechatronic systems requires the integrated expertise of specialists from each of these areas. Destined to become a standard reference for engineering professionals around the world, The Mechatronics Handbook provides a unique, detailed overview of this vibrant, dynamic field and sets forth its state of the art. More than 60 articles authored by a stellar panel of academics and practitioners explore every facet of the field, from an overview of its history, through the underlying theories, systems, processes, and practice to perspectives on the field's current and future trends. The world of mechatronics is wide open, full of potential and bright possibilities. The Mechatronics Handbook is a landmark work that is both your portal to that world and your roadmap through its intricacies.

Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2002-02-26 with total page 1272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics has evolved into a way of life in engineering practice, and indeed pervades virtually every aspect of the modern world. As the synergistic integration of mechanical, electrical, and computer systems, the successful implementation of mechatronic systems requires the integrated expertise of specialists from each of these areas. De

Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.

Download or read book Applied Reliability for Industry 3 written by Abdelkhalak El Hami and published by John Wiley & Sons. This book was released on 2023-04-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Reliability for Industry 3 illustrates the multidisciplinary state-of-the-art science of operational reliability. Many experts are now convinced that reliability is not limited to statistical sciences. In fact, many different disciplines interact in order to bring a product to its highest possible level of reliability, made available through today’s technologies, developments and production methods. These three books, of which this is the third, propose new methods for analyzing the lifecycle of a system, enabling us to record the development phases according to development time and levels of complexity for its integration. Operational reliability, as presented in Applied Reliability for Industry 3, verifies the reliability performance of the mechatronic system in real life through an analysis of field data.

Download or read book Mechatronic Systems in Engineering written by Sahin Yildirim and published by BoD – Books on Demand. This book was released on 2017-05-03 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book can serve as a reference resource for those very same design and control engineers who help connect their everyday experience in design with the control field of mechatronics. This book also consists of basic and main mechatronic system's laboratory applications for use in research and development departments in academia, government, and industry, and it can be used as a reference source in university libraries. It can also be used as a resource for scholars interested in understanding and explaining the engineering design and control process and for engineering students studying within the traditional structure of most engineering departments and colleges. It is evident that there is an expansion of mechatronics laboratories and classes in the university environment worldwide.

Download or read book Distributed Control Applications written by Alois Zoitl and published by CRC Press. This book was released on 2017-12-19 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Control Applications: Guidelines, Design Patterns, and Application Examples with the IEC 61499 discusses the IEC 61499 reference architecture for distributed and reconfigurable control and its adoption by industry. The book provides design patterns, application guidelines, and rules for designing distributed control applications based on the IEC 61499 reference model. Moreover, examples from various industrial domains and laboratory environments are introduced and explored.

Download or read book Infrared Spectroscopy of Symmetric and Spherical Top Molecules for Space Observation Volume 2 written by Pierre-Richard Dahoo and published by John Wiley & Sons. This book was released on 2021-10-26 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Volume 4 in the series, is dedicated to the relationship between laboratory spectroscopy, recording ever-more-complex spectra using increasingly powerful instruments benefiting from the latest technology, and the development of observation using instruments that are embedded in mobile probes or nanosatellites. The theoretical models described in Volumes 1, 2 and 3 are used in this volume, applying the cumulant theorem in the mean-field theory framework to interpret the near and mid-infrared spectra of symmetric top molecules, such as ammonia (NH3) and spherical molecules, such as methane (CH4). These molecules can be isolated in their gaseous form or subjected to the environmental constraints of a nano-cage (a substitution site, clathrate, fullerene or zeolite) or surfaces. These methods are not only valuable in the fields of environmental sciences, planetology and astrophysics, but also fit into the framework of data processing and the concept of Big Data.