Download or read book Embedded Mechatronic Systems written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2019-12-15 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives. The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Embedded Mechatronic Systems 1, Second Edition presents two methodologies: the statistical approach to the design optimization by reliability and the experimental approach for the characterization of the development of mechatronic systems in operating mode. It also analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses. Presents a statistical approach to the design optimization by reliability It presents an experimental approach for the characterization of the development of mechatronic systems in operating mode The book analyzes new analysis tools on the effects of thermal, vibratory, humidity, electric and electromagnetic stresses

Download or read book Embedded Mechatronic Systems 2 written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2020-03-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms

Download or read book Embedded Mechatronic Systems Volume 2 written by Abdelkhalak El Hami and published by ISTE Press - Elsevier. This book was released on 2015-07-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests.

Download or read book Embedded Mechatronic Systems 2 written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embedded Mechatronic Systems Volume 1 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2015-07-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components which induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests This book helps you to: Find and develop ways to characterize and validate the design robustness and reliability of complex mechatronic devices Develop ways to characterize physical and chemical phenomena Identify mechanisms of failure of components of these devices Analyze the physical and chemical mechanisms of failure, in order of importance Model failure mechanisms and design optimization

Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by Control, Robotics and Sensors. This book was released on 2019-01-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial machines, automobiles, airplanes, robots, and machines are among the myriad possible hosts of embedded systems. This book has been prepared for those who seek to easily develop and design embedded systems for control purposes in robotic vehicles.

Download or read book Embedded Mechatronic Systems written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2019-11-26 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics brings together computer science, mechanics and electronics. It enables us to improve the performances of embedded electronic systems by reducing their weight, volume, energy consumption and cost. Mechatronic equipment must operate without failure throughout ever-increasing service lives.The particularly severe conditions of use of embedded mechatronics cause failure mechanisms which are the source of breakdowns. Until now, these failure phenomena have not been looked at with enough depth to be able to be controlled. Provides a statistical approach to design optimization through reliability Presents an experimental approach for the characterization of the development of mechatronic systems in operating mode Analyzes new tools that effect thermal, vibratory, humidity, electric and electromagnetic stresses

Download or read book Embedded Mechatronic Systems 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2020-02-28 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Mechatronic Systems 2: Analysis of Failures, Modeling, Simulation and Optimization presents advances in research within the field of mechatronic systems, which integrates reliability into the design process. Providing many detailed examples, this book develops a characterization methodology for faults in mechatronic systems. It analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms. This development of meta-models enables us to simulate effects on the reliability of conditions of use and manufacture. Provides many detailed examples Develops a characterization methodology for faults in mechatronic systems Analyzes the multi-physical modeling of faults, revealing weaknesses in design and failure mechanisms

Download or read book Embedded Mechatronic Systems Volume 2 written by Abdelkhalak El Hami and published by Elsevier. This book was released on 2015-07-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: In operation, mechatronics embedded systems are stressed by loads of different causes: climate (temperature, humidity), vibration, electrical and electromagnetic. These stresses in components induce failure mechanisms should be identified and modeled for better control. AUDACE is a collaborative project of the cluster Mov'eo that address issues specific to mechatronic reliability embedded systems. AUDACE means analyzing the causes of failure of components of mechatronic systems onboard. The goal of the project is to optimize the design of mechatronic devices by reliability. The project brings together public sector laboratories that have expertise in analysis and modeling of failure, major groups of mechatronics (Valeo and Thales) in the automotive and aerospace and small and medium enterprises that have skills in characterization and validation tests. Find and develop ways to characterize and validate the design robustness and reliability of complex mechatronic devices Develop ways to characterize physical and chemical phenomena, Identify mechanisms of failure of components of these devices, Analyze the physical and / or chemical mechanisms of failure, in order of importance To model failure mechanisms and design optimization.

Download or read book Embedded Computing and Mechatronics with the PIC32 Microcontroller written by Kevin Lynch and published by Newnes. This book was released on 2015-12-08 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time in a single reference, this book provides the beginner with a coherent and logical introduction to the hardware and software of the PIC32, bringing together key material from the PIC32 Reference Manual, Data Sheets, XC32 C Compiler User's Guide, Assembler and Linker Guide, MIPS32 CPU manuals, and Harmony documentation. This book also trains you to use the Microchip documentation, allowing better life-long learning of the PIC32. The philosophy is to get you started quickly, but to emphasize fundamentals and to eliminate "magic steps" that prevent a deep understanding of how the software you write connects to the hardware. Applications focus on mechatronics: microcontroller-controlled electromechanical systems incorporating sensors and actuators. To support a learn-by-doing approach, you can follow the examples throughout the book using the sample code and your PIC32 development board. The exercises at the end of each chapter help you put your new skills to practice. Coverage includes: A practical introduction to the C programming language Getting up and running quickly with the PIC32 An exploration of the hardware architecture of the PIC32 and differences among PIC32 families Fundamentals of embedded computing with the PIC32, including the build process, time- and memory-efficient programming, and interrupts A peripheral reference, with extensive sample code covering digital input and output, counter/timers, PWM, analog input, input capture, watchdog timer, and communication by the parallel master port, SPI, I2C, CAN, USB, and UART An introduction to the Microchip Harmony programming framework Essential topics in mechatronics, including interfacing sensors to the PIC32, digital signal processing, theory of operation and control of brushed DC motors, motor sizing and gearing, and other actuators such as stepper motors, RC servos, and brushless DC motors For more information on the book, and to download free sample code, please visit http://www.nu32.org Extensive, freely downloadable sample code for the NU32 development board incorporating the PIC32MX795F512H microcontroller Free online instructional videos to support many of the chapters

Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.

Download or read book Mechatronic Systems written by Annalisa Milella and published by BoD – Books on Demand. This book was released on 2010-03-01 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics, the synergistic blend of mechanics, electronics, and computer science, has evolved over the past twenty five years, leading to a novel stage of engineering design. By integrating the best design practices with the most advanced technologies, mechatronics aims at realizing high-quality products, guaranteeing at the same time a substantial reduction of time and costs of manufacturing. Mechatronic systems are manifold and range from machine components, motion generators, and power producing machines to more complex devices, such as robotic systems and transportation vehicles. With its twenty chapters, which collect contributions from many researchers worldwide, this book provides an excellent survey of recent work in the field of mechatronics with applications in various fields, like robotics, medical and assistive technology, human-machine interaction, unmanned vehicles, manufacturing, and education. We would like to thank all the authors who have invested a great deal of time to write such interesting chapters, which we are sure will be valuable to the readers. Chapters 1 to 6 deal with applications of mechatronics for the development of robotic systems. Medical and assistive technologies and human-machine interaction systems are the topic of chapters 7 to 13.Chapters 14 and 15 concern mechatronic systems for autonomous vehicles. Chapters 16-19 deal with mechatronics in manufacturing contexts. Chapter 20 concludes the book, describing a method for the installation of mechatronics education in schools.

Download or read book Embedded Mechatronics System Design for Uncertain Environments written by Cheng Siong Chin and published by . This book was released on 2018 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been prepared for the needs of those who seek an application on developing embedded mechatronics system easy for control purposes. The choice of material is guided by the basic objective of making an engineer or student capable of dealing with embedded system design. The book can be used as a textbook, reference book, laboratory exercise for a first course in Linux®-based embedded system, xPC-Target, PIC-Microchip, ARDUINO®, and Raspberry Pi. The contents of the book are organized into seven main chapters with program codes. The main chapters include sections on Linux®-based system design, model-based simulation, and xPC-Target system design. In these chapters, it contains applications on various real-life systems such as the underwater robotics vehicle, vacuum cleaning, climbing robot for inspection, magnetic levitation for conveyor system, temperature monitoring, face recognition and vision-based inspection using camera, and vibration sensor. As it is not possible to cover every single subject in each chapter, the chapters therefore emphasize on certain topics in the embedded systems design process. The software adopted throughout the chapters are Ubuntu/ FedoraTM, PythonTM, QtTM, MATLAB®/Simulink®, and other open-source software development kits from PIC-Microchip, ARDUINO®, and R.

Download or read book The Mechatronics Handbook 2 Volume Set written by Robert H. Bishop and published by CRC Press. This book was released on 2018-10-08 with total page 1416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive reference on mechatronics, The Mechatronics Handbook was quickly embraced as the gold standard in the field. From washing machines, to coffeemakers, to cell phones, to the ubiquitous PC in almost every household, what, these days, doesn’t take advantage of mechatronics in its design and function? In the scant five years since the initial publication of the handbook, the latest generation of smart products has made this even more obvious. Too much material to cover in a single volume Originally a single-volume reference, the handbook has grown along with the field. The need for easy access to new material on rapid changes in technology, especially in computers and software, has made the single volume format unwieldy. The second edition is offered as two easily digestible books, making the material not only more accessible, but also more focused. Completely revised and updated, Robert Bishop’s seminal work is still the most exhaustive, state-of-the-art treatment of the field available.

Download or read book Applied Control Theory for Embedded Systems written by Tim Wescott and published by Elsevier. This book was released on 2011-03-31 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment. Practical, down-to-earth guide teaches engineers to apply practical control theorems without needing to employ rigorous math Covers the latest concepts in control systems with embedded digital controllers

Download or read book Essentials of Mechatronics written by John Billingsley and published by John Wiley & Sons. This book was released on 2006-05-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to study, analyze, select, and design a successful mechatronic product This innovative, cutting-edge publication presents the essential nature of mechatronics, a field at the crossroads of information technology and mechanical and electrical engineering. Readers learn how to blend mechanisms, electronics, sensors, control strategies, and software into a functional design. Given the breadth that the field of mechatronics draws upon, this publication provides a critical service to readers by paring down the topics to the most essential ones. A common thread throughout the publication is tailoring performance to the actual needs of the user, rather than designing "by the book." Practical methods clarify engineering trade-offs needed to design and manufacture competitive state-of-the-art products and systems. Key features include: * Easy-to-construct set of laboratory experiments to give readers practice in controlling difficult systems using discrete-time algorithms * Essentials of control theory, concentrating on state-space and easily constructed simulations in JavaScript, including typical mechatronic systems with gross nonlinearities where linear methods give the "wrong answer" * Hot topics that include advances in the automotive, multimedia, robotics, defense, medical, and consumer industries * Author-provided Web site at www.EssMech.com offers additional resources, including videos, dynamic simulation examples, software tools, and downloads There are hundreds of choices involved in all but the simplest of mechatronic design tasks. Using this publication as a reference, electrical, mechanical, and computer designers and engineers can find the most efficient, cost-effective methods to transform their goals into successful commercial products. With its use of laboratory experiments, this publication is also recommended as a graduate-level textbook. Author Web site located at www.EssMech.com provides in-depth support material that includes links to simulations for modeling dynamic systems with real-time interactions, image processing examples, and 3D robot modeling software, enabling readers to "construct" and manipulate their own mechanism as well as other useful links.

Download or read book Control of Mechatronic Systems written by Levent Güvenç and published by IET. This book was released on 2017-05-16 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces researchers and advanced students with a basic control systems background to an array of control techniques which they can easily implement and use to meet the required performance specifications for their mechatronic applications. It is the result of close to two decades of work of the authors on modeling, simulating and controlling different mechatronic systems from the motion control, automotive control and micro and nano-mechanical systems control areas. The methods presented in the book have all been tested by the authors and a very large group of researchers, who have produced practically implementable controllers with highly successful results.