Download or read book Embedded Controllers written by James Fiore and published by . This book was released on 2016-04-14 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is not your average Arduino book! Instead, Embedded Controllers Using C and Arduino is designed for those who wish to "get under the hood" and use the Arduino environment as a launching pad into the world of embedded controller programming and interfacing. The first half of the text offers an extensive explanation of the C programming language. The second half focuses on the Arduino open source environment. Instead of relying solely on the standard Arduino library functions, alternate efficient and time tested techniques are examined alongside them. Detailed descriptions of the Atmel 328p controller used in the Arduino Uno lend depth to the discussion of the associated software calls that control it. The source code of many of the most widely used library functions is examined and alternative techniques are explored. This enables the programmer to extend their utility beyond the Arduino and to make use of other embedded development systems. This is the print version of the on-line OER.

Download or read book Embedded Controllers Using C and Arduino written by James M. Fiore and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embedded Controllers Using C and Arduino written by James Fiore and published by . This book was released on 2016-03-21 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the companion laboratory manual to accompany Embedded Controllers Using C and Arduino. The fifteen lab exercises range from introductory C programming concepts to interesting and useful device applications. Exercises cover topics such as basic digital and analog input/output programming and interfacing, multiplexing of LED displays, how to generate a true analog output, use of interrupts and the like. Applications include a reaction timer, an event counter, motor drive using PWM, and an arbitrary analog waveform generator. Most exercises can be completed using just a computer, the low cost Arduino Uno development board, and an array of small electronic parts such as LEDs, resistors, transistors, etc. Some exercises benefit from an oscilloscope. This is the print version of the on-line OER.

Download or read book Introduction to Embedded Systems written by David Russell and published by Morgan & Claypool Publishers. This book was released on 2010-10-10 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many electrical and computer engineering projects involve some kind of embedded system in which a microcontroller sits at the center as the primary source of control. The recently-developed Arduino development platform includes an inexpensive hardware development board hosting an eight-bit ATMEL ATmega-family processor and a Java-based software-development environment. These features allow an embedded systems beginner the ability to focus their attention on learning how to write embedded software instead of wasting time overcoming the engineering CAD tools learning curve. The goal of this text is to introduce fundamental methods for creating embedded software in general, with a focus on ANSI C. The Arduino development platform provides a great means for accomplishing this task. As such, this work presents embedded software development using 100% ANSI C for the Arduino's ATmega328P processor. We deviate from using the Arduino-specific Wiring libraries in an attempt to provide the most general embedded methods. In this way, the reader will acquire essential knowledge necessary for work on future projects involving other processors. Particular attention is paid to the notorious issue of using C pointers in order to gain direct access to microprocessor registers, which ultimately allow control over all peripheral interfacing. Table of Contents: Introduction / ANSI C / Introduction to Arduino / Embedded Debugging / ATmega328P Architecture / General-Purpose Input/Output / Timer Ports / Analog Input Ports / Interrupt Processing / Serial Communications / Assembly Language / Non-volatile Memory

Download or read book Designing Embedded Systems with Arduino written by Tianhong Pan and published by Springer. This book was released on 2017-05-16 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this DIY guide, you will learn how to use Arduino – the open-source hardware board for makers, hobbyists, and inventors. You will learn how to develop your own projects, create prototypes, and produce professional-quality embedded systems. A simple step-by-step demonstration system accompanies you from vision to reality – and just like riding a bike, you’ll get better at it, the more you do it. Featuring a wealth of detailed diagrams and more than 50 fully functional examples, this book will help you get the most out of this versatile tool and bring your electronic inventions to life.

Download or read book AVR Programming written by Elliot Williams and published by Maker Media, Inc.. This book was released on 2014-01-27 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atmel's AVR microcontrollers are the chips that power Arduino, and are the go-to chip for many hobbyist and hardware hacking projects. In this book you'll set aside the layers of abstraction provided by the Arduino environment and learn how to program AVR microcontrollers directly. In doing so, you'll get closer to the chip and you'll be able to squeeze more power and features out of it. Each chapter of this book is centered around projects that incorporate that particular microcontroller topic. Each project includes schematics, code, and illustrations of a working project. Program a range of AVR chips Extend and re-use other people’s code and circuits Interface with USB, I2C, and SPI peripheral devices Learn to access the full range of power and speed of the microcontroller Build projects including Cylon Eyes, a Square-Wave Organ, an AM Radio, a Passive Light-Sensor Alarm, Temperature Logger, and more Understand what's happening behind the scenes even when using the Arduino IDE

Download or read book TinyML written by Pete Warden and published by O'Reilly Media. This book was released on 2019-12-16 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deep learning networks are getting smaller. Much smaller. The Google Assistant team can detect words with a model just 14 kilobytes in size—small enough to run on a microcontroller. With this practical book you’ll enter the field of TinyML, where deep learning and embedded systems combine to make astounding things possible with tiny devices. Pete Warden and Daniel Situnayake explain how you can train models small enough to fit into any environment. Ideal for software and hardware developers who want to build embedded systems using machine learning, this guide walks you through creating a series of TinyML projects, step-by-step. No machine learning or microcontroller experience is necessary. Build a speech recognizer, a camera that detects people, and a magic wand that responds to gestures Work with Arduino and ultra-low-power microcontrollers Learn the essentials of ML and how to train your own models Train models to understand audio, image, and accelerometer data Explore TensorFlow Lite for Microcontrollers, Google’s toolkit for TinyML Debug applications and provide safeguards for privacy and security Optimize latency, energy usage, and model and binary size

Download or read book C Programming for Arduino written by Julien Bayle and published by Packt Publishing Ltd. This book was released on 2013-05-17 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written as a practical Packt book brimming with engaging examples, C Programming for Arduino will help those new to the amazing open source electronic platform so that they can start developing some great projects from the very start.This book is great for people who want to learn how to design & build their own electronic devices. From interaction design art school students to the do-it-yourself hobbyist, or even simply people who want to learn electronics, this book will help by adding a new way to design autonomous but connected devices.

Download or read book Test Driven Development for Embedded C written by James W. Grenning and published by Pragmatic Bookshelf. This book was released on 2011-04-25 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Another day without Test-Driven Development means more time wasted chasing bugs and watching your code deteriorate. You thought TDD was for someone else, but it's not! It's for you, the embedded C programmer. TDD helps you prevent defects and build software with a long useful life. This is the first book to teach the hows and whys of TDD for C programmers. TDD is a modern programming practice C developers need to know. It's a different way to program---unit tests are written in a tight feedback loop with the production code, assuring your code does what you think. You get valuable feedback every few minutes. You find mistakes before they become bugs. You get early warning of design problems. You get immediate notification of side effect defects. You get to spend more time adding valuable features to your product. James is one of the few experts in applying TDD to embedded C. With his 1.5 decades of training,coaching, and practicing TDD in C, C++, Java, and C# he will lead you from being a novice in TDD to using the techniques that few have mastered. This book is full of code written for embedded C programmers. You don't just see the end product, you see code and tests evolve. James leads you through the thought process and decisions made each step of the way. You'll learn techniques for test-driving code right nextto the hardware, and you'll learn design principles and how to apply them to C to keep your code clean and flexible. To run the examples in this book, you will need a C/C++ development environment on your machine, and the GNU GCC tool chain or Microsoft Visual Studio for C++ (some project conversion may be needed).

Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.

Download or read book Programming Embedded Systems written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 2006-10-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.

Download or read book Beginning STM32 written by Warren Gay and published by Apress. This book was released on 2018-06-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using FreeRTOS and libopencm3 instead of the Arduino software environment, this book will help you develop multi-tasking applications that go beyond Arduino norms. In addition to the usual peripherals found in the typical Arduino device, the STM32 device includes a USB controller, RTC (Real Time Clock), DMA (Direct Memory Access controller), CAN bus and more. Each chapter contains clear explanations of the STM32 hardware capabilities to help get you started with the device, including GPIO and several other ST Microelectronics peripherals like USB and CAN bus controller. You’ll learn how to download and set up the libopencm3 + FreeRTOS development environment, using GCC. With everything set up, you’ll leverage FreeRTOS to create tasks, queues, and mutexes. You’ll also learn to work with the I2C bus to add GPIO using the PCF8574 chip. And how to create PWM output for RC control using hardware timers. You'll be introduced to new concepts that are necessary to master the STM32, such as how to extend code with GCC overlays using an external Winbond ​W25Q32 flash chip. Your knowledge is tested at the end of each chapter with exercises. Upon completing this book, you’ll be ready to work with any of the devices in the STM32 family. Beginning STM32 provides the professional, student, or hobbyist a way to learn about ARM without costing an arm! What You'll Learn Initialize and use the libopencm3 drivers and handle interrupts Use DMA to drive a SPI based OLED displaying an analog meter Read PWM from an RC control using hardware timers Who This Book Is For Experienced embedded engineers, students, hobbyists and makers wishing to explore the ARM architecture, going beyond Arduino limits.

Download or read book Getting Started with Arduino written by Massimo Banzi and published by "O'Reilly Media, Inc.". This book was released on 2011-09-13 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an introduction to the open-source electronics prototyping platform.

Download or read book Embedded Computing and Mechatronics with the PIC32 Microcontroller written by Kevin Lynch and published by Newnes. This book was released on 2015-12-08 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the first time in a single reference, this book provides the beginner with a coherent and logical introduction to the hardware and software of the PIC32, bringing together key material from the PIC32 Reference Manual, Data Sheets, XC32 C Compiler User's Guide, Assembler and Linker Guide, MIPS32 CPU manuals, and Harmony documentation. This book also trains you to use the Microchip documentation, allowing better life-long learning of the PIC32. The philosophy is to get you started quickly, but to emphasize fundamentals and to eliminate "magic steps" that prevent a deep understanding of how the software you write connects to the hardware. Applications focus on mechatronics: microcontroller-controlled electromechanical systems incorporating sensors and actuators. To support a learn-by-doing approach, you can follow the examples throughout the book using the sample code and your PIC32 development board. The exercises at the end of each chapter help you put your new skills to practice. Coverage includes: A practical introduction to the C programming language Getting up and running quickly with the PIC32 An exploration of the hardware architecture of the PIC32 and differences among PIC32 families Fundamentals of embedded computing with the PIC32, including the build process, time- and memory-efficient programming, and interrupts A peripheral reference, with extensive sample code covering digital input and output, counter/timers, PWM, analog input, input capture, watchdog timer, and communication by the parallel master port, SPI, I2C, CAN, USB, and UART An introduction to the Microchip Harmony programming framework Essential topics in mechatronics, including interfacing sensors to the PIC32, digital signal processing, theory of operation and control of brushed DC motors, motor sizing and gearing, and other actuators such as stepper motors, RC servos, and brushless DC motors For more information on the book, and to download free sample code, please visit http://www.nu32.org Extensive, freely downloadable sample code for the NU32 development board incorporating the PIC32MX795F512H microcontroller Free online instructional videos to support many of the chapters

Download or read book Programming Embedded Systems in C and C written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 1999 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces embedded systems to C and C++ programmers. Topics include testing memory devices, writing and erasing flash memory, verifying nonvolatile memory contents, controlling on-chip peripherals, device driver design and implementation, and more.

Download or read book The Avr Microcontroller and Embedded Systems Using Assembly and C written by Sepehr Naimi and published by . This book was released on 2017-11-13 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The AVR microcontroller from Atmel (now Microchip) is one of the most widely used 8-bit microcontrollers. Arduino Uno is based on AVR microcontroller. It is inexpensive and widely available around the world. This book combines the two. In this book, the authors use a step-by-step and systematic approach to show the programming of the AVR chip. Examples in both Assembly language and C show how to program many of the AVR features, such as timers, serial communication, ADC, SPI, I2C, and PWM. The text is organized into two parts: 1) The first 6 chapters use Assembly language programming to examine the internal architecture of the AVR. 2) Chapters 7-18 uses both Assembly and C to show the AVR peripherals and I/O interfacing to real-world devices such as LCD, motor, and sensor. The first edition of this book published by Pearson used ATmega32. It is still available for purchase from Amazon. This new edition is based on Atmega328 and the Arduino Uno board. The appendices, source codes, tutorials and support materials for both books are available on the following websites: http: //www.NicerLand.com/ and http: //www.MicroDigitalEd.com/AVR/AVR_books.htm

Download or read book Arduino Microcontroller Processing for Everyone written by Steven Barrett and published by Springer Nature. This book was released on 2012-06-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about the Arduino microcontroller and the Arduino concept. The visionary Arduino team of Massimo Banzi, David Cuartielles, Tom Igoe, Gianluca Martino, and David Mellis launched a new innovation in microcontroller hardware in 2005, the concept of open source hardware. Their approach was to openly share details of microcontroller-based hardware design platforms to stimulate the sharing of ideas and promote innovation. This concept has been popular in the software world for many years. This book is intended for a wide variety of audiences including students of the fine arts, middle and senior high school students, engineering design students, and practicing scientists and engineers. To meet this wide audience, the book has been divided into sections to satisfy the need of each reader. The book contains many software and hardware examples to assist the reader in developing a wide variety of systems. For the examples, the Arduino UNO R3 and the Atmel ATmega328 is employed as the target processor. The second edition has been updated with the latest on the Arduino UNO R3 processor, changes to the Arduino Development Environment and several extended examples. Table of Contents: Getting Started / Programming / Embedded Systems Design / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing