Download or read book Embedded Controllers Using C and Arduino written by James M. Fiore and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Control Theory for Embedded Systems written by Tim Wescott and published by Elsevier. This book was released on 2011-03-31 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment. - Practical, down-to-earth guide teaches engineers to apply practical control theorems without needing to employ rigorous math - Covers the latest concepts in control systems with embedded digital controllers
Download or read book Embedded Controller Hardware Design written by Ken Arnold and published by Newnes. This book was released on 2001 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of electronics fundamentals -- Microcontroller concepts -- Worst-case timing, loading, analysis, and design -- Memory technologies and interfacing -- CPU bus interface and timing -- A detailed design example -- Programmable logic devices -- Basic I/O interfaces -- Other interfaces and bus cycles -- Other useful stuff -- Other interfaces.
Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.
Download or read book Practical Embedded Controllers written by John Park and published by Elsevier. This book was released on 2003-06-12 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will help the technician, engineer and user understand the microcontroller-based systems along with the most common problems and their solutions. This book covers design, specification, programming, installation, configuration and of course troubleshooting.·An engineer's guide to the design, applications and troubleshooting of microcontroller-based systems·The introductory chapters on embedded microcontroller architecture and programming are written at the right level with an applications focus for practicing engineers·A highly topical book with a wide readership involved with product design and industrial processes including control systems
Download or read book Embedded Microcontrollers written by Todd D. Morton and published by . This book was released on 2001 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book on designing real-time embedded systems using 8-and 16-bit microcontrollers covers both assembly and C programming and real-time kernels. Using a large number of specific examples, it focuses on the concepts, processes, conventions, and techniques used in design and debugging. Chapter topics include programming basics; simple assembly code construction; CPU12 programming model; basic assembly programming techniques; assembly program design and structure; assembly applications; real-time I/O and multitasking; microcontroller I/O resources; modular and C code construction; creating and accessing data in C; real-time multitasking in C; and using the MICROC/OS-II preemptive kernel. For anyone who wants to design small- to medium-sized embedded systems.
Download or read book Embedded Controllers written by Barry B. Brey and published by . This book was released on 1998 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book that deals with the programming and interfacing aspects of the embedded microprocessor family that has gained wide application in many areas of electronics, communications, and control systems. The book uses the Microsoft Macro assembler program (MASM) that develops many example programming applications using not only the 80186/80188 and 80386EX, but all the Intel family members from the 80486 through the Pentium Pro processor and contains hundreds of applications that can be executed on the personal computer.
Download or read book Embedded Digital Control with Microcontrollers written by Cem Unsalan and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMBEDDED DIGITAL CONTROL WITH MICROCONTROLLERS Explore a concise and practical introduction to implementation methods and the theory of digital control systems on microcontrollers Embedded Digital Control with Microcontrollers delivers expert instruction in digital control system implementation techniques on the widely used ARM Cortex-M microcontroller. The accomplished authors present the included information in three phases. First, they describe how to implement prototype digital control systems via the Python programming language in order to help the reader better understand theoretical digital control concepts. Second, the book offers readers direction on using the C programming language to implement digital control systems on actual microcontrollers. This will allow readers to solve real-life problems involving digital control, robotics, and mechatronics. Finally, readers will learn how to merge the theoretical and practical issues discussed in the book by implementing digital control systems in real-life applications. Throughout the book, the application of digital control systems using the Python programming language ensures the reader can apply the theory contained within. Readers will also benefit from the inclusion of: A thorough introduction to the hardware used in the book, including STM32 Nucleo Development Boards and motor drive expansion boards An exploration of the software used in the book, including Python, MicroPython, and Mbed Practical discussions of digital control basics, including discrete-time signals, discrete-time systems, linear and time-invariant systems, and constant coefficient difference equations An examination of how to represent a continuous-time system in digital form, including analog-to-digital conversion and digital-to-analog conversion Perfect for undergraduate students in electrical engineering, Embedded Digital Control with Microcontrollers will also earn a place in the libraries of professional engineers and hobbyists working on digital control and robotics systems seeking a one-stop reference for digital control systems on microcontrollers.
Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--
Download or read book Embedded Control System Design written by Alexandru Forrai and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging the gap between theory and practice. The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are faced with the challenge to design control systems and implement them in real-time.
Download or read book Design of Embedded Control Systems written by Marian Andrzej Adamski and published by Springer Science & Business Media. This book was released on 2005-06-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A set of original results in the ?eld of high-level design of logical control devices and systems is presented in this book. These concern different aspects of such important and long-term design problems, including the following, which seem to be the main ones. First, the behavior of a device under design must be described properly, and some adequate formal language should be chosen for that. Second, effective algorithmsshouldbeusedforcheckingtheprepareddescriptionforcorrectness, foritssyntacticandsemanticveri?cationattheinitialbehaviorlevel.Third,the problem of logic circuit implementation must be solved using some concrete technological base; ef?cient methods of logic synthesis, test, and veri?cation should be developed for that. Fourth, the task of the communication between the control device and controlled objects (and maybe between different control devices)waitsforitssolution.Alltheseproblemsarehardenoughandcannotbe successfully solved without ef?cient methods and algorithms oriented toward computer implementation. Some of these are described in this book. The languages used for behavior description have been descended usually from two well-known abstract models which became classic: Petri nets and ?nite state machines (FSMs). Anyhow, more detailed versions are developed and described in the book, which enable to give more complete information concerningspeci?cqualitiesoftheregardedsystems.Forexample,themodelof parallelautomatonispresented,whichunliketheconventional?niteautomaton can be placed simultaneously into several places, calledpartial. As a base for circuit implementation of control algorithms, FPGA is accepted in majority of cases.
Download or read book Microcontroller and Embedded System written by A.K. Singh and published by New Age International. This book was released on 2008 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimal Design of Distributed Control and Embedded Systems written by Arben Çela and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Design of Distributed Control and Embedded Systems focuses on the design of special control and scheduling algorithms based on system structural properties as well as on analysis of the influence of induced time-delay on systems performances. It treats the optimal design of distributed and embedded control systems (DCESs) with respect to communication and calculation-resource constraints, quantization aspects, and potential time-delays induced by the associated communication and calculation model. Particular emphasis is put on optimal control signal scheduling based on the system state. In order to render this complex optimization problem feasible in real time, a time decomposition is based on periodicity induced by the static scheduling is operated. The authors present a co-design approach which subsumes the synthesis of the optimal control laws and the generation of an optimal schedule of control signals on real-time networks as well as the execution of control tasks on a single processor. The authors also operate a control structure modification or a control switching based on a thorough analysis of the influence of the induced time-delay system influence on stability and system performance in order to optimize DCES performance in case of calculation and communication resource limitations. Although the richness and variety of classes of DCES preclude a completely comprehensive treatment or a single “best” method of approaching them all, this co-design approach has the best chance of rendering this problem feasible and finding the optimal or some sub-optimal solution. The text is rounded out with references to such applications as car suspension and unmanned vehicles. Optimal Design of Distributed Control and Embedded Systems will be of most interest to academic researchers working on the mathematical theory of DCES but the wide range of environments in which they are used also promotes the relevance of the text for control practitioners working in the avionics, automotive, energy-production, space exploration and many other industries.
Download or read book Embedded Controller Forth For The 8051 Family written by William H. Payne and published by Academic Press. This book was released on 2012-12-02 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present the technology requied to develop hardware and software for embedded controller systems at a fraction of the cost of traditional methods. Included in the book are hardware schematics of 8051 family development systems (single board and bussed 8051 microcontroller). Source code for both the 8086 and 805 family FORTH operating systems is published in the book. Binary images of the opeating systems can be generated from teh source code using the metacompiler also contained in the book. The book can be seen as a "toolbox" includingg all the necessary hardware and software information to be used in constructing 8051-based controller systems.
Download or read book Distributed Embedded Control Systems written by Matjaž Colnaric and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new work comes complete with more than 100 illustrations and a detailed practical prototype. It explores the domains encountered when designing a distributed embedded computer control system as an integrated whole. Basic issues about real-time systems and their properties, especially safety, are examined first. Then, system and hardware architectures are dealt with, along with programming issues, embodying desired properties, basic language subsets, object orientation and language support for hardware and software specifications.
Download or read book Embedded Systems Design for High Speed Data Acquisition and Control written by Maurizio Di Paolo Emilio and published by Springer. This book was released on 2014-09-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a practical guide for practicing engineers who need to design embedded systems for high-speed data acquisition and control systems. A minimum amount of theory is presented, along with a review of analog and digital electronics, followed by detailed explanations of essential topics in hardware design and software development. The discussion of hardware focuses on microcontroller design (ARM microcontrollers and FPGAs), techniques of embedded design, high speed data acquisition (DAQ) and control systems. Coverage of software development includes main programming techniques, culminating in the study of real-time operating systems. All concepts are introduced in a manner to be highly-accessible to practicing engineers and lead to the practical implementation of an embedded board that can be used in various industrial fields as a control system and high speed data acquisition system.
Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.
