Download or read book Canada s Top Climate Change Risks written by The Expert Panel on Climate Change Risks and Adaptation Potential and published by Council of Canadian Academies. This book was released on 2019-07-04 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Canada’s Top Climate Change Risks identifies the top risk areas based on the extent and likelihood of the potential damage, and rates the risk areas according to society’s ability to adapt and reduce negative outcomes. These 12 major areas of risk are: agriculture and food, coastal communities, ecosystems, fisheries, forestry, geopolitical dynamics, governance and capacity, human health and wellness, Indigenous ways of life, northern communities, physical infrastructure, and water. The report describes an approach to inform federal risk prioritization and adaptation responses. The Panel outlines a multi-layered method of prioritizing adaptation measures based on an understanding of the risk, adaptation potential, and federal roles and responsibilities.

Download or read book Strengthening Forensic Science in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-07-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scores of talented and dedicated people serve the forensic science community, performing vitally important work. However, they are often constrained by lack of adequate resources, sound policies, and national support. It is clear that change and advancements, both systematic and scientific, are needed in a number of forensic science disciplines to ensure the reliability of work, establish enforceable standards, and promote best practices with consistent application. Strengthening Forensic Science in the United States: A Path Forward provides a detailed plan for addressing these needs and suggests the creation of a new government entity, the National Institute of Forensic Science, to establish and enforce standards within the forensic science community. The benefits of improving and regulating the forensic science disciplines are clear: assisting law enforcement officials, enhancing homeland security, and reducing the risk of wrongful conviction and exoneration. Strengthening Forensic Science in the United States gives a full account of what is needed to advance the forensic science disciplines, including upgrading of systems and organizational structures, better training, widespread adoption of uniform and enforceable best practices, and mandatory certification and accreditation programs. While this book provides an essential call-to-action for congress and policy makers, it also serves as a vital tool for law enforcement agencies, criminal prosecutors and attorneys, and forensic science educators.

Download or read book The Regional Impacts of Climate Change written by Intergovernmental Panel on Climate Change. Working Group II. and published by Cambridge University Press. This book was released on 1998 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cambridge, UK : Cambridge University Press, 1998.

Download or read book AI and education written by Miao, Fengchun and published by UNESCO Publishing. This book was released on 2021-04-08 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Artificial Intelligence (AI) has the potential to address some of the biggest challenges in education today, innovate teaching and learning practices, and ultimately accelerate the progress towards SDG 4. However, these rapid technological developments inevitably bring multiple risks and challenges, which have so far outpaced policy debates and regulatory frameworks. This publication offers guidance for policy-makers on how best to leverage the opportunities and address the risks, presented by the growing connection between AI and education. It starts with the essentials of AI: definitions, techniques and technologies. It continues with a detailed analysis of the emerging trends and implications of AI for teaching and learning, including how we can ensure the ethical, inclusive and equitable use of AI in education, how education can prepare humans to live and work with AI, and how AI can be applied to enhance education. It finally introduces the challenges of harnessing AI to achieve SDG 4 and offers concrete actionable recommendations for policy-makers to plan policies and programmes for local contexts. [Publisher summary, ed]

Download or read book Probability and Statistics for Engineering and the Sciences written by Jay Devore and published by Cengage Learning. This book was released on 2007-01-26 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This market-leading text provides a comprehensive introduction to probability and statistics for engineering students in all specialties. This proven, accurate book and its excellent examples evidence Jay Devore’s reputation as an outstanding author and leader in the academic community. Devore emphasizes concepts, models, methodology, and applications as opposed to rigorous mathematical development and derivations. Through the use of lively and realistic examples, students go beyond simply learning about statistics-they actually put the methods to use. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.

Download or read book Innovative Learning Environments in STEM Higher Education written by Jungwoo Ryoo and published by Springer Nature. This book was released on 2021-03-11 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: As explored in this open access book, higher education in STEM fields is influenced by many factors, including education research, government and school policies, financial considerations, technology limitations, and acceptance of innovations by faculty and students. In 2018, Drs. Ryoo and Winkelmann explored the opportunities, challenges, and future research initiatives of innovative learning environments (ILEs) in higher education STEM disciplines in their pioneering project: eXploring the Future of Innovative Learning Environments (X-FILEs). Workshop participants evaluated four main ILE categories: personalized and adaptive learning, multimodal learning formats, cross/extended reality (XR), and artificial intelligence (AI) and machine learning (ML). This open access book gathers the perspectives expressed during the X-FILEs workshop and its follow-up activities. It is designed to help inform education policy makers, researchers, developers, and practitioners about the adoption and implementation of ILEs in higher education.

Download or read book The Sun the Earth and Near earth Space written by John A. Eddy and published by Government Printing Office. This book was released on 2009 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: " ... Concise explanations and descriptions - easily read and readily understood - of what we know of the chain of events and processes that connect the Sun to the Earth, with special emphasis on space weather and Sun-Climate."--Dear Reader.

Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.

Download or read book Democracy and Education written by John Dewey and published by Createspace Independent Publishing Platform. This book was released on 1916 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: . Renewal of Life by Transmission. The most notable distinction between living and inanimate things is that the former maintain themselves by renewal. A stone when struck resists. If its resistance is greater than the force of the blow struck, it remains outwardly unchanged. Otherwise, it is shattered into smaller bits. Never does the stone attempt to react in such a way that it may maintain itself against the blow, much less so as to render the blow a contributing factor to its own continued action. While the living thing may easily be crushed by superior force, it none the less tries to turn the energies which act upon it into means of its own further existence. If it cannot do so, it does not just split into smaller pieces (at least in the higher forms of life), but loses its identity as a living thing. As long as it endures, it struggles to use surrounding energies in its own behalf. It uses light, air, moisture, and the material of soil. To say that it uses them is to say that it turns them into means of its own conservation. As long as it is growing, the energy it expends in thus turning the environment to account is more than compensated for by the return it gets: it grows. Understanding the word "control" in this sense, it may be said that a living being is one that subjugates and controls for its own continued activity the energies that would otherwise use it up. Life is a self-renewing process through action upon the environment.

Download or read book Climate Change and Indigenous Peoples in the United States written by Julie Koppel Maldonado and published by Springer. This book was released on 2014-04-05 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a long history and deep connection to the Earth’s resources, indigenous peoples have an intimate understanding and ability to observe the impacts linked to climate change. Traditional ecological knowledge and tribal experience play a key role in developing future scientific solutions for adaptation to the impacts. The book explores climate-related issues for indigenous communities in the United States, including loss of traditional knowledge, forests and ecosystems, food security and traditional foods, as well as water, Arctic sea ice loss, permafrost thaw and relocation. The book also highlights how tribal communities and programs are responding to the changing environments. Fifty authors from tribal communities, academia, government agencies and NGOs contributed to the book. Previously published in Climatic Change, Volume 120, Issue 3, 2013.

Download or read book Teaching STEM in the Secondary School written by Frank Banks and published by Routledge. This book was released on 2020-12-29 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: considers what the STEM subjects contribute separately to the curriculum and how they relate to each other in the wider education of secondary school students describes and evaluates different curriculum models for STEM suggests ways in which a critical approach to the pedagogy of the classroom, laboratory and workshop can support and encourage all pupils to engage fully in STEM addresses the practicalities of introducing, organising and sustaining STEM-related activities in the secondary school looks to ways schools can manage and sustain STEM approaches in the long-term

Download or read book Software Engineering written by Ian Sommerville and published by Pearson Higher Ed. This book was released on 2011-11-21 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the eBook of the printed book and may not include any media, website access codes, or print supplements that may come packaged with the bound book. Intended for introductory and advanced courses in software engineering. The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever. The book is now structured into four parts: 1: Introduction to Software Engineering 2: Dependability and Security 3: Advanced Software Engineering 4: Software Engineering Management

Download or read book World Development Report 2019 written by World Bank and published by World Bank Publications. This book was released on 2018-10-31 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Work is constantly reshaped by technological progress. New ways of production are adopted, markets expand, and societies evolve. But some changes provoke more attention than others, in part due to the vast uncertainty involved in making predictions about the future. The 2019 World Development Report will study how the nature of work is changing as a result of advances in technology today. Technological progress disrupts existing systems. A new social contract is needed to smooth the transition and guard against rising inequality. Significant investments in human capital throughout a person’s lifecycle are vital to this effort. If workers are to stay competitive against machines they need to train or retool existing skills. A social protection system that includes a minimum basic level of protection for workers and citizens can complement new forms of employment. Improved private sector policies to encourage startup activity and competition can help countries compete in the digital age. Governments also need to ensure that firms pay their fair share of taxes, in part to fund this new social contract. The 2019 World Development Report presents an analysis of these issues based upon the available evidence.

Download or read book OpenIntro Statistics written by David Diez and published by . This book was released on 2015-07-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The OpenIntro project was founded in 2009 to improve the quality and availability of education by producing exceptional books and teaching tools that are free to use and easy to modify. We feature real data whenever possible, and files for the entire textbook are freely available at openintro.org. Visit our website, openintro.org. We provide free videos, statistical software labs, lecture slides, course management tools, and many other helpful resources.

Download or read book UNESCO science report written by UNESCO and published by UNESCO Publishing. This book was released on 2015-11-09 with total page 818 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are fewer grounds today than in the past to deplore a North‑South divide in research and innovation. This is one of the key findings of the UNESCO Science Report: towards 2030. A large number of countries are now incorporating science, technology and innovation in their national development agenda, in order to make their economies less reliant on raw materials and more rooted in knowledge. Most research and development (R&D) is taking place in high-income countries, but innovation of some kind is now occurring across the full spectrum of income levels according to the first survey of manufacturing companies in 65 countries conducted by the UNESCO Institute for Statistics and summarized in this report. For many lower-income countries, sustainable development has become an integral part of their national development plans for the next 10–20 years. Among higher-income countries, a firm commitment to sustainable development is often coupled with the desire to maintain competitiveness in global markets that are increasingly leaning towards ‘green’ technologies. The quest for clean energy and greater energy efficiency now figures among the research priorities of numerous countries. Written by more than 50 experts who are each covering the country or region from which they hail, the UNESCO Science Report: towards 2030 provides more country-level information than ever before. The trends and developments in science, technology and innovation policy and governance between 2009 and mid-2015 described here provide essential baseline information on the concerns and priorities of countries that could orient the implementation and drive the assessment of the 2030 Agenda for Sustainable Development in the years to come.

Download or read book Biochar for Environmental Management written by Dr. Johannes Lehmann and published by Earthscan. This book was released on 2009 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Biochar is the carbon-rich product when biomass (such as wood, manure, or crop residues) is heated in a closed container with little or no available air. It can be used to improve agriculture and the environment in several ways, and its stability in soil and superior nutrient-retention properties make it an ideal soil amendment to increase crop yields. In addition to this, biochar sequestration, in combination with sustainable biomass production, can be carbon-negative and therefore used to actively remove carbon dioxide from the atmosphere, with major implications for mitigation of climate change. Biochar production can also be combined with bioenergy production through the use of the gases that are given off in the pyrolysis process.This book is the first to synthesize the expanding research literature on this topic. The book's interdisciplinary approach, which covers engineering, environmental sciences, agricultural sciences, economics and policy, is a vital tool at this stage of biochar technology development. This comprehensive overview of current knowledge will be of interest to advanced students, researchers and professionals in a wide range of disciplines"--Provided by publisher.

Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.