Download or read book Electrowetting Liquid Lens Oscillations for Optical Applications written by David Schipf and published by . This book was released on 2019 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to modulate the phase of a transmitted beam over space and time is valuable in optical systems. Adaptive optics systems, such as retina imaging systems, can require dynamic wavefront correction and shaping of coherent beams. A two liquid cell with dissimilar refractive indices and a user defined meniscus profile can modulate a wavefront with polarization insensitivity. This can be done in transmission, and with cost-effective materials, by controlling the meniscus profile with electrowetting. While the use of a static meniscus profile shape in electrowetting lenses is well documented, the use of oscillations on the meniscus profile has just recently begun to be explored. The superposition of electrowetting liquid lens oscillations can form an arbitrary profile for user defined wavefront correction or beam shaping. If only one electrode around the liquids is used, radially symmetric oscillations are present, while multiple electrodes enables asymmetric oscillation patterns. Models for the dynamics of an electrowetting liquid lens are given and discussed in this thesis. A method for measuring the liquid-liquid meniscus profile over space and time using digital holographic interferometry (DHI) is detailed. Measurements of a commercial electrowetting liquid lens driven from f[subscript]f=10-200 Hz are presented and analyzed. A frequency response is given, as well as an analysis of the oscillation frequencies and profile spatial spectrum. Non-linear effects that were observed at higher forcing amplitudes are noted. A new application application of an oscillating electrowetting liquid lenses in random phase mask optical image cryptography is also presented. Through the presentation of experimental, theoretical and numerical work, the usefulness of oscillating electrowetting lenses for optical applications is investigated.
Download or read book Fundamentals of Micro Optics written by Hans Zappe and published by Cambridge University Press. This book was released on 2010-09-30 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: From optical fundamentals to advanced applications, this comprehensive guide to micro-optics covers all the key areas for those who need an in-depth introduction to micro-optic devices, technologies, and applications. Topics covered range from basic optics, optical materials, refraction, and diffraction, to micro-mirrors, micro-lenses, diffractive optics, optoelectronics, and fabrication. Advanced topics, such as tunable and nano-optics, are also discussed. Real-world case studies and numerous worked examples are provided throughout, making complex concepts easier to follow, whilst an extensive bibliography provides a valuable resource for further study. With exercises provided at the end of each chapter to aid and test understanding, this is an ideal textbook for graduate and advanced undergraduate students taking courses in optics, photonics, micro-optics, microsystems, and MEMs. It is also a useful self-study guide for research engineers working on optics development.
Download or read book Physical Model and Applications of High Efficiency Electro Optical Conversion Devices written by Feng Chi and published by Frontiers Media SA. This book was released on 2022-02-02 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Microfluidics and Nanofluidics written by Dongqing Li and published by Springer Science & Business Media. This book was released on 2008-08-06 with total page 2242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering all aspects of transport phenomena on the nano- and micro-scale, this encyclopedia features over 750 entries in three alphabetically-arranged volumes including the most up-to-date research, insights, and applied techniques across all areas. Coverage includes electrical double-layers, optofluidics, DNC lab-on-a-chip, nanosensors, and more.
Download or read book 21st Century Surface Science written by Phuong Pham and published by BoD – Books on Demand. This book was released on 2020-11-26 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface sciences elucidate the physical and chemical aspects of the surfaces and interfaces of materials. Of great interest in this field are nanomaterials, which have recently experienced breakthroughs in synthesis and application. As such, this book presents some recent representative achievements in the field of surface science, including synthesis techniques, surface modifications, nanoparticle-based smart coatings, wettability of different surfaces, physics/chemistry characterizations, and growth kinetics of thin films. In addition, the book illustrates some of the important applications related to silicon, CVD graphene, graphene oxide, transition metal dichalcogenides, carbon nanotubes, carbon nanoparticles, transparent conducting oxide, and metal oxides.
Download or read book Tunable Liquid Micro optical Systems Based on Electrowetting written by Florian Krogmann and published by . This book was released on 2008 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non wettable Surfaces written by Robin Ras and published by Royal Society of Chemistry. This book was released on 2016-11-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing provided
Download or read book Electrowetting written by Frieder Mugele and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Starting from the basic principles of wetting, electrowetting and fluid dynamics all the way up to those engineering aspects relevant for the development of specific devices, this is a comprehensive introduction and overview of the theoretical and practical aspects. Written by two of the most knowledgeable experts in the field, the text covers both current as well as possible future applications, providing basic working principles of lab-on-a-chip devices and such optofluidic devices as adaptive lenses and optical switches. Furthermore, novel e-paper display technology, energy harvesting and supercapacitors as well as electrowetting in the nano-world are discussed. Finally, the book contains a series of exercises and questions for use in courses on microfluidics or electrowetting. With its all-encompassing scope, this book will equally serve the growing community of students and academic and industrial researchers as both an introduction and a standard reference.
Download or read book Microfluidics for Biotechnology written by Jean Berthier and published by Artech House. This book was released on 2010 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of microfluidics to biotechnology is an exciting new area that has already begun to revolutionize how researchers study and manipulate macromolecules like DNA, proteins and cells in vitro and within living organisms. Now in a newly revised and expanded second edition, the Artech House bestseller, Microfluidics for Biotechnology brings you to the cutting edge of this burgeoning field. Among the numerous updates, the second edition features three entirely new chapters on: non-dimensional numbers in microfluidics; interface, capillarity and microdrops; and digital, two-phase and droplet microfluidics.Presenting an enlightening balance of numerical approaches, theory, and experimental examples, this book provides a detailed look at the mechanical behavior of the different types of micro/nano particles and macromolecules that are used in biotechnology. You gain a solid understanding of microfluidics theory and the mechanics of microflows and microdrops. The book examines the diffusion of species and nanoparticles, including continuous flow and discrete Monte-Carlo methods.This unique volume describes the transport and dispersion of biochemical species and particles. You learn how to model biochemical reactions, including DNA hybridization and enzymatic reactions. Moreover, the book helps you master the theory, applications, and modeling of magnetic beads behavior and provides an overview of self-assembly and magnetic composite. Other key topics include the electric manipulation of micro/nanoparticles and macromolecules and the experimental aspects of biological macromolecule manipulation.
Download or read book Ultrashort Pulse Laser Technology written by Stefan Nolte and published by Springer. This book was released on 2015-10-19 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrashort laser pulses with durations in the femtosecond range up to a few picoseconds provide a unique method for precise materials processing or medical applications. Paired with the recent developments in ultrashort pulse lasers, this technology is finding its way into various application fields. The book gives a comprehensive overview of the principles and applications of ultrashort pulse lasers, especially applied to medicine and production technology. Recent advances in laser technology are discussed in detail. This covers the development of reliable and cheap low power laser sources as well as high average power ultrashort pulse lasers for large scale manufacturing. The fundamentals of laser-matter-interaction as well as processing strategies and the required system technology are discussed for these laser sources with respect to precise materials processing. Finally, different applications within medicine, measurement technology or materials processing are highlighted.
Download or read book Microscale Surface Tension and Its Applications written by Pierre Lambert and published by MDPI. This book was released on 2019-10-21 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on advances in miniaturization and soft matter, surface tension effects are a major key to the development of soft/fluidic microrobotics. Benefiting from scaling laws, surface tension and capillary effects can enable sensing, actuation, adhesion, confinement, compliance, and other structural and functional properties necessary in micro- and nanosystems. Various applications are under development: microfluidic and lab-on-chip devices, soft gripping and manipulation of particles, colloidal and interfacial assemblies, fluidic/droplet mechatronics. The capillary action is ubiquitous in drops, bubbles and menisci, opening a broad spectrum of technological solutions and scientific investigations. Identified grand challenges to the establishment of fluidic microrobotics include mastering the dynamics of capillary effects, controlling the hysteresis arising from wetting and evaporation, improving the dispensing and handling of tiny droplets, and developing a mechatronic approach for the control and programming of surface tension effects. In this Special Issue of Micromachines, we invite contributions covering all aspects of microscale engineering relying on surface tension. Particularly, we welcome contributions on fundamentals or applications related to: Drop-botics: fluidic or surface tension-based micro/nanorobotics: capillary manipulation, gripping, and actuation, sensing, folding, propulsion and bio-inspired solutions; Control of surface tension effects: surface tension gradients, active surfactants, thermocapillarity, electrowetting, elastocapillarity; Handling of droplets, bubbles and liquid bridges: dispensing, confinement, displacement, stretching, rupture, evaporation; Capillary forces: modelling, measurement, simulation; Interfacial engineering: smart liquids, surface treatments; Interfacial fluidic and capillary assembly of colloids and devices; Biological applications of surface tension, including lab-on-chip and organ-on-chip systems.
Download or read book Capillarity and Wetting Phenomena written by Pierre-Gilles de Gennes and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of capillarity is in the midst of a veritable explosion. What is offered here is not a comprehensive review of the latest research but rather a compendium of principles designed for the undergraduate student and for readers interested in the physics underlying these phenomena.
Download or read book Transparent Conductive Materials written by David Levy and published by John Wiley & Sons. This book was released on 2019-04-29 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Edited by well-known pioneers in the field, this handbook and ready reference provides a comprehensive overview of transparent conductive materials with a strong application focus. Following an introduction to the materials and recent developments, subsequent chapters discuss the synthesis and characterization as well as the deposition techniques that are commonly used for energy harvesting and light emitting applications. Finally, the book concludes with a look at future technological advances. All-encompassing and up-to-date, this interdisciplinary text runs the gamut from chemistry and materials science to engineering, from academia to industry, and from fundamental challenges to readily available applications.
Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.
Download or read book Lab on Fiber Technology written by Andrea Cusano and published by Springer. This book was released on 2014-07-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on a research field that is rapidly emerging as one of the most promising ones for the global optics and photonics community: the “lab-on-fiber” technology. Inspired by the well-established "lab on-a-chip" concept, this new technology essentially envisages novel and highly functionalized devices completely integrated into a single optical fiber for both communication and sensing applications. Based on the R&D experience of some of the world's leading authorities in the fields of optics, photonics, nanotechnology, and material science, this book provides a broad and accurate description of the main developments and achievements in the lab-on-fiber technology roadmap, also highlighting the new perspectives and challenges to be faced. This book is essential for scientists interested in the cutting-edge fiber optic technology, but also for graduate students.
Download or read book The Acoustic Bubble written by T Leighton and published by Academic Press. This book was released on 2012-12-02 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Acoustic Bubble describes the interaction of acoustic fields with bubbles in liquid. The book consists of five chapters. Chapter 1 provides a basic introduction to acoustics, including some of the more esoteric phenomena that can be seen when high-frequency high-intensity underwater sound is employed. Chapter 2 discusses the nucleation of cavitation and basic fluid dynamics, while Chapter 3 draws together the acoustics and bubble dynamics to discuss the free oscillation of a bubble and acoustic emissions from such activity. The acoustic probes that are often applied to study the behavior of a bubble when an externally-applied acoustic field drives it into oscillation is deliberated in Chapter 4. The last chapter outlines a variety of effects associated with acoustically-induced bubble activity. The bubble detection, sonoluminescence, sonochemistry, and pulse enhancement are also covered. This publication is a good reference for physics and engineering students and researchers intending to acquire knowledge of the acoustic interactions of acoustic fields with bubbles.
Download or read book Laser Radar written by National Research Council and published by National Academies Press. This book was released on 2014-03-14 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today's world, the range of technologies with the potential to threaten the security of U.S. military forces is extremely broad. These include developments in explosive materials, sensors, control systems, robotics, satellite systems, and computing power, to name just a few. Such technologies have not only enhanced the capabilities of U.S. military forces, but also offer enhanced offensive capabilities to potential adversaries - either directly through the development of more sophisticated weapons, or more indirectly through opportunities for interrupting the function of defensive U.S. military systems. Passive and active electro-optical (EO) sensing technologies are prime examples. Laser Radar considers the potential of active EO technologies to create surprise; i.e., systems that use a source of visible or infrared light to interrogate a target in combination with sensitive detectors and processors to analyze the returned light. The addition of an interrogating light source to the system adds rich new phenomenologies that enable new capabilities to be explored. This report evaluates the fundamental, physical limits to active EO sensor technologies with potential military utility; identifies key technologies that may help overcome the impediments within a 5-10 year timeframe; considers the pros and cons of implementing each existing or emerging technology; and evaluates the potential uses of active EO sensing technologies, including 3D mapping and multi-discriminate laser radar technologies.
