Download or read book Electrophotography and Development Physics written by Lawrence B. Schein and published by Springer Science & Business Media. This book was released on 2013-03-07 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrophotography and Development Physics focuses on the complicated and increasingly important technology found in photocopiers and laser printers. An introduction chapter acquaints the reader with the technical history of electrophotography, its current and projected markets, and also alternative related copying and printing technologies. A concise descriptionof the physics of the complete electrophotgraphic process is followed by an in-depth treatment of static electricity. The three types of developmentsystems (two component, monocomponent, and liquid), and their associated charging mechanisms. In this second edition, a discussion of the new color copiers and a chapter updating the original material have been added. On mastering this material, which is presented in a manner suitable for both the newcomer and the established expert, the reader will have a workingknowledge of the electrophotographic process and a detailed knowledge of its important subsystem, development.
Download or read book Electrophotography and Development Physics written by Lawrence B. Schein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrophotography (also called xerography), the technology inside the famil iar copier, has become increasingly important to modern society. Since the first automatic electrophotographic copiers were introduced in 1959, they have become indispensable to the modern office and now constitute a multi billion dollar industry involving many of the world's largest corporations. By the 1990s, it is expected that electrophotography will be one of the most pre valent printer technologies. This will occur because of the growing need for printers that are quiet, that can produce multiple fonts, and that can print graphics and images. Electrophotographic printers satisfy these requirements and have demonstrated economic and technical viability over an enormous speed range, from 6 to 220 pages per minute, with output quality that ap proaches offset printing. Organizations contemplating designing a new electrophotographic copier or printer need to deal with two sets of issues. First, for each of the six process steps in electrophotography there are several different technologies that must be evaluated and chosen. For example, there are three development technol ogies (dual component, mono component and liquid); cleaning can be done with a blade or brush; and the photoconductor can be inorganic or organic, either of which can be configured in the form of a belt or a drum. Second, once a technology for each step is chosen, it must be optimized and integrated with the other process steps. This optimization and integration is facilitated by a firm scientific understanding of the technologies being considered.
Download or read book Organic Photoreceptors for Xerography written by Paul M. Borsenberger and published by CRC Press. This book was released on 1998-04-29 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents fundamental, as well as state-of-the-art, information on the physics, chemistry, materials, fabrication, preparation, application and performance of organic photoreceptors in xerography. The book offers on-the-job situations to problems related to xerographic photoreceptors and related technologies, including electroluminescent, photorefractive, photovoltaic and transistor devices.
Download or read book Handbook of Digital Imaging written by Michael Kriss and published by John Wiley & Sons. This book was released on 2015-02-16 with total page 1936 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and practical analysis and overview of the imaging chain through acquisition, processing and display The Handbook of Digital Imaging provides a coherent overview of the imaging science amalgam, focusing on the capture, storage and display of images. The volumes are arranged thematically to provide a seamless analysis of the imaging chain from source (image acquisition) to destination (image print/display). The coverage is planned to have a very practical orientation to provide a comprehensive source of information for practicing engineers designing and developing modern digital imaging systems. The content will be drawn from all aspects of digital imaging including optics, sensors, quality, control, colour encoding and decoding, compression, projection and display. Contains approximately 50 highly illustrated articles printed in full colour throughout Over 50 Contributors from Europe, US and Asia from academia and industry The 3 volumes are organized thematically for enhanced usability: Volume 1: Image Capture and Storage; Volume 2: Image Display and Reproduction, Hardcopy Technology, Halftoning and Physical Evaluation, Models for Halftone Reproduction; Volume 3: Imaging System Applications, Media Imaging, Remote Imaging, Medical and Forensic Imaging 3 Volumes www.handbookofdigitalimaging.com
Download or read book Investigation of Toner Adhesion in the Electrophotographic Process written by Hongben Zhou and published by Cuvillier Verlag. This book was released on 2008 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of Color Imaging Systems written by Lalit K. Mestha and published by CRC Press. This book was released on 2018-10-03 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Complete One-Stop Resource While digital color is now the technology of choice for printers, the knowledge required to address the quality and productivity issues of these devices is scattered across several technologies, as is its supporting literature. Bringing together information from diverse fields, Control of Color Imaging Systems: Analysis and Design is the first book to provide comprehensive coverage of the fundamentals and algorithms of the numerous disciplines associated with digital color printing in a single resource. The authors review the history of digital printing systems, explore its current status, and explain fundamental concepts, including: digital image formation, sampling, quantization, image coding, spot color calibration, and one- and multi-dimensional tone control of color management systems — including process physics and controls. A Complete Self-Tutorial With Over 150 Design Examples and 120 Exercise Problems Based on the authors’ three decades of hands-on technical and teaching experience, the text provides engineers and technicians with an end-to-end understanding of the color printing process, and helps them build a foundation drawn from the diverse disciplines needed to manage and control digital production printers. The control theory and methods presented in this book are state-of-the art for color printing systems; however, coverage of theoretical concepts and mathematics are kept to the basics, as the book is designed to teach hand’s on skills that will allow practitioners to gain an immediate understanding of quality and productivity concerns. The understanding provided will help practitioners build the technical skills needed to help pioneer the next generation of ideas, algorithms, and methods that will further expand the frontier of this rapidly evolving technology.
Download or read book Handbook of Electrostatic Processes written by Jen-Shih Chang and published by CRC Press. This book was released on 2018-12-14 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Provides detailed, comprehensive descriptions of electrostatic processes as well as their applications in areas such as rheology, atomization and spraying, industrial dust particle precipitation and filtering, biomedical engineering, gas treatments, atmospheric electricity, chemical reactors, and electronic devices. Summarizes electrostatic fundamentals and electrical phenomena in solids and fluids."
Download or read book Advances in Information Storage Systems written by Bharat Bhushan and published by World Scientific. This book was released on 1999 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advances in Information Storage Systems (AISS), volumes 9 & 10, are special volumes which contain selected papers regarding not only information storage but also information equipment in general and related technologies. The papers were presented at the International Conference on Micromechatronics for Information and Precision Equipment (MIPE '97). MIPE '97 was held in Tokyo, Japan, from 20 to 23 July 1997, as one of the memorial events of the Centennial Grand Congress of the Japan Society of Mechanical Engineers.Information and precision equipment is fast-changing high technology, and is necessary for the development of an international multimedia society and essential for the innovation of conventional machines as well as the creation of new sophisticated machines for future medical, biological and cosmic industries in the 21st century.
Download or read book Chemical Electrostatics written by Fernando Galembeck and published by Springer. This book was released on 2017-03-09 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides new clues for understanding electrostatic charging in solids and liquids, resulting from the surge of research in this active area of science that is taking place since the 1990's but is still largely unknown to most researchers, lecturers and engineers. Written by a leading researcher in this field, this book describes the formation and properties of the Earth capacitor, the production of environmental electricity and its effect on natural and anthropic systems and examines many situations in which water may play a decisive role in electrostatic behavior. The authors present an informed critique of the long-held assumption that pure substances should be electroneutral. In this regard, the authors show that charge partition and accumulation is expected considering the electrochemical potential under non-zero electrostatic potential, which prevails at Earth surface. This book provides conceptual tools to guide the reader through the complexities and consequences of electrostatic phenomena while covering exciting current topics such as energy scavenging from the environment, electrostatic based green production, energy-saving processes, electrochemistry at the solid-gas interface, therapeutic electrostatic treatments, applications in sanitation and pest control and control of atmospheric electricity and its use in climate engineering.
Download or read book Polymers and Light written by Wolfram Schnabel and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to focus on the important and topical effect of light on polymeric materials reflects the multidisciplinary nature of the topic, building a bridge between polymer chemistry and physics, photochemistry and photophysics, and materials science. Written by one experienced author, a consistent approach is maintained throughout, covering such applications as nonlinear optical materials, core materials for optical waveguides, photoresists in the production of computer chips, photoswitches and optical memories. Advanced reading for polymer, physical and organic chemists, manufacturers of optoelectronic devices, chemical engineers, and materials scientists.
Download or read book Organic Photoreceptors for Imaging Systems written by Borsenberger and published by CRC Press. This book was released on 2018-10-08 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers in detail the preparation and application of current and emerging organic materials used as xerographic photoreceptors, emphasizing the photo-electric properties of organic solids and evaluating their potential use in xerography.;Reviewing the development of xerography and the steps in the xerographic process, this volume: summarizes the properties, advantages and disadvantages of various classes of materials used as photoreceptors; describes the methods of characterizing the sensitometry of xerographic photoreceptors; examines the physics and chemistry of photogeneration and charge transport processes; and elucidates the sensimetry of different classes of organic materials.;Organic Photoreceptors for Imaging Systems is intended for imaging scientists, optical engineers and physicists, organic chemists, materials scienctists and students in these disciplines.
Download or read book Forensic Document Examination in the 21st Century written by Miriam Angel and published by CRC Press. This book was released on 2020-12-21 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forensic Document Examination in the 21st Century covers the latest technology and techniques providing a complete resource on contemporary issues and methods in forensic document examination. Forensic document examiners provide their findings as expert testimony in court. Due to rapid changes in technology, including digital documents, printing and photocopying capabilities, and more, there is a great need for this up-to-date reference. The examination of documents can include comparison of handwriting or hand-printing; detection of alterations or photocopier and computer manipulation; restoration or decipherment of erased and obliterated writing; visualization of latent impressions; the identification of printing processes; and differentiation of inks. Computer-generated documents are prevalent, and electronically-captured signatures are becoming more widespread, meaning the knowledge of advances in technology and adoption of new validated techniques and methods of document examination are crucial to the reliability of forensic opinions. Forensic Document Examination in the 21st Century includes the latest research on the subject and with contributions from leading experts on their various areas of expertise. The book will be a welcome addition to the literature and support the foundational basis for methods and procedures for use it expert testimony in court, serving as a resource for forensic document examiners, trainees, and those in the criminal and legal communities who use the services of expert document examiners and witnesses
Download or read book Frontiers in Surface Science and Interface Science written by C.B. Duke and published by Gulf Professional Publishing. This book was released on 2002-05-21 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: Any notion that surface science is all about semiconductors and coatings is laid to rest by this encyclopedic publication: Bioengineered interfaces in medicine, interstellar dust, DNA computation, conducting polymers, the surfaces of atomic nuclei - all are brought up to date. Frontiers in Surface and Interface Science - a milestone publication deserving a wide readership. It combines a sweeping expert survey of research today with an educated look into the future. It is a future that embraces surface phenomena on scales from the subatomic to the galactic, as well as traditional topics like semiconductor design, catalysis, and surface processing, modeling and characterization. And, great efforts have been made to express sophisticated ideas in an attractive and accessible way. Nanotechnology, surfaces for DNA computation, polymer-based electronics, soft surfaces, interstellar surface chemistry - all feature in this comprehensive collection.
Download or read book Handbook of Imaging Materials written by Arthur S. Diamond and published by CRC Press. This book was released on 2018-10-08 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Presents the most recent developments in the materials, properties, and performance characteristics of photographic, electrophotographic, electrostatic, diazo, and ink jet imaging processes. Provides current techniques and modern applications for ink jet, thermal, and toner-related imaging systems."
Download or read book An Introduction to Plastics written by Hans-Georg Elias and published by John Wiley & Sons. This book was released on 2003-11-07 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Plastics is the answer to manifold requests for an updated version by the readership. Since publication of the first edition in 1993, the field of plastics has seen tremendous development. Their manufacture and properties are discussed and correlated to the molecular and supermolecular properties of polymers. The contents have been thoroughly revised, restructured and enlarged. Several topics such as polymer composites and mixtures, morphology, flow properties and processing have been given more space, and chapters on electrical conductivity and non-linear optical properties have been newly added. Reviews of the first edition: "This book presents a precise, yet non-mathematical introduction to plastics, their raw materials, syntheses, properties and applications." (B. Sillion, Revue de l'Institut Francais du Pétrole) "The volume is excellently written, with a simple, straightforward and comprehensive index. It provides an overview of all plastics, including raw materials: manufacture, structure, processing, properties and, of course, applications" (D.W. Taylor and J.F. Kennedy, Polymer International) "This book has all the earmarks of becoming a guide to or even a reference book for polymers in structural applications" (Willi Kreuder, Acta Polymerica)
Download or read book Encyclopedia of Applied Physics written by George L. Trigg and published by . This book was released on 1991 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Counter This cumulative index is essential for all those who need to consult the Encyclopedia of Applied Physics for specific information which is not treated in a separate entry. It provides full access to this indispensible reference work.
Download or read book Numerical Simulation of Monocomponent Dry Toner Development Physics in Gap Jump Laser Electrophotography by a Phenomenological Method written by Jang Yi and published by . This book was released on 2002 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
