Download or read book A Designer s Guide to Asynchronous VLSI written by Peter A. Beerel and published by Cambridge University Press. This book was released on 2010-02-04 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create low power, higher performance circuits with shorter design times using this practical guide to asynchronous design. This practical alternative to conventional synchronous design enables performance close to full-custom designs with design times that approach commercially available ASIC standard cell flows. It includes design trade-offs, specific design examples, and end-of-chapter exercises. Emphasis throughout is placed on practical techniques and real-world applications, making this ideal for circuit design students interested in alternative design styles and system-on-chip circuits, as well as circuit designers in industry who need new solutions to old problems.

Download or read book Introduction to Power Electronics written by Paul H. Chappell and published by Artech House. This book was released on 2013-12-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of power electronics is concerned with solid state devices for the control and conversion of electrical power. These silicon devices are designed mainly for switching the transfer current from one part of an electrical circuit to another. Power electronics has a wide range of applications from the small systems used in electrical appliances to very large systems for the supply and distribution of electricity. Although it can be difficult to completely define where the boundary lies between electronics and power electronics, this resource succeeds at breaking down the discipline. Containing the useful concepts and building blocks that go into making a power converter operate successfully, this book provides a description of the characteristics of different types of power semiconductor devices and their application to power converter circuits. Applications to power transmission, electric drives, and medical equipment are included to illustrate the wide range of power electronics in both small and high power circuits.

Download or read book Digital Circuits written by Ronald C. Emery and published by CRC Press. This book was released on 2020-11-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended to introduce the student of electronics to the fundamentals of digital circuits, both combinational and sequential, in a reasonable and systematic manner. It proceeds from basic logic concepts to circuits and designs.

Download or read book Circuits for Electronic Instrumentation written by Thomas Henry O'Dell and published by Cambridge University Press. This book was released on 1991-08-30 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an up-to-date text on electronic circuit design. The subject is dealt with from an experimental point of view, but this has not restricted the author to well-known or simple circuits. Indeed, some very recent and quite advanced circuit ideas are put forward for experimental work. Each chapter takes up a particular type of circuit, and then leads the reader on to gain an understanding of how these circuits work by proposing experimental circuits for the reader to build and make measurements on. This is the first book to take such a practical approach to this level. The book will be useful to final year undergraduates and postgraduates in electronics, practising engineers, and workers in all fields where electronic instrumentation is used and there is a need to understand electronics and the interface between the instrument and the user's own experimental system. The book's references will also be a very helpful guide to the literature.

Download or read book A Practical Approach to Signals and Systems written by D. Sundararajan and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concisely covers all the important concepts in an easy-to-understand way Gaining a strong sense of signals and systems fundamentals is key for general proficiency in any electronic engineering discipline, and critical for specialists in signal processing, communication, and control. At the same time, there is a pressing need to gain mastery of these concepts quickly, and in a manner that will be immediately applicable in the real word. Simultaneous study of both continuous and discrete signals and systems presents a much easy path to understanding signals and systems analysis. In A Practical Approach to Signals and Systems, Sundararajan details the discrete version first followed by the corresponding continuous version for each topic, as discrete signals and systems are more often used in practice and their concepts are relatively easier to understand. In addition to examples of typical applications of analysis methods, the author gives comprehensive coverage of transform methods, emphasizing practical methods of analysis and physical interpretations of concepts. Gives equal emphasis to theory and practice Presents methods that can be immediately applied Complete treatment of transform methods Expanded coverage of Fourier analysis Self-contained: starts from the basics and discusses applications Visual aids and examples makes the subject easier to understand End-of-chapter exercises, with a extensive solutions manual for instructors MATLAB software for readers to download and practice on their own Presentation slides with book figures and slides with lecture notes A Practical Approach to Signals and Systems is an excellent resource for the electrical engineering student or professional to quickly gain an understanding of signal analysis concepts - concepts which all electrical engineers will eventually encounter no matter what their specialization. For aspiring engineers in signal processing, communication, and control, the topics presented will form a sound foundation to their future study, while allowing them to quickly move on to more advanced topics in the area. Scientists in chemical, mechanical, and biomedical areas will also benefit from this book, as increasing overlap with electrical engineering solutions and applications will require a working understanding of signals. Compact and self contained, A Practical Approach to Signals and Systems be used for courses or self-study, or as a reference book.

Download or read book A Foundation in Digital Communication written by Amos Lapidoth and published by Cambridge University Press. This book was released on 2009-07-09 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This intuitive yet rigourous introduction derives the core results of digital communication from first principles. Theory, rather than industry standards, motivates the engineering approaches, and key results are stated with all the required assumptions. The book emphasizes the geometric view, opening with the inner product, the matched filter for its computation, Parseval's theorem, the sampling theorem as an orthonormal expansion, the isometry between passband signals and their baseband representation, and the spectral-efficiency optimality of quadrature amplitude modulation (QAM). Subsequent chapters address noise, hypothesis testing, Gaussian stochastic processes, and the sufficiency of the matched filter outputs. Uniquely, there is a treatment of white noise without generalized functions, and of the power spectral density without artificial random jitters and random phases in the analysis of QAM. This systematic and insightful book, with over 300 exercises, is ideal for graduate courses in digital communication, and for anyone asking 'why' and not just 'how'.

Download or read book Electronics written by Owen Bishop and published by Routledge. This book was released on 2010 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: -Companion website offers student and lecturer support.

Download or read book Complete Electronics Self Teaching Guide with Projects written by Earl Boysen and published by John Wiley & Sons. This book was released on 2012-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: An all-in-one resource on everything electronics-related! For almost 30 years, this book has been a classic text for electronics enthusiasts. Now completely updated for today's technology, this latest version combines concepts, self-tests, and hands-on projects to offer you a completely repackaged and revised resource. This unique self-teaching guide features easy-to-understand explanations that are presented in a user-friendly format to help you learn the essentials you need to work with electronic circuits. All you need is a general understanding of electronics concepts such as Ohm's law and current flow, and an acquaintance with first-year algebra. The question-and-answer format, illustrative experiments, and self-tests at the end of each chapter make it easy for you to learn at your own speed. Boasts a companion website that includes more than twenty full-color, step-by-step projects Shares hands-on practice opportunities and conceptual background information to enhance your learning process Targets electronics enthusiasts who already have a basic knowledge of electronics but are interested in learning more about this fascinating topic on their own Features projects that work with the multimeter, breadboard, function generator, oscilloscope, bandpass filter, transistor amplifier, oscillator, rectifier, and more You're sure to get a charge out of the vast coverage included in Complete Electronics Self-Teaching Guide with Projects!

Download or read book Power Circuits and Electromechanics written by M. A. Pai and published by . This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Circuits and Electromechanics is intended to serve as a one semester introductory course in power circuits and electromechanical energy conversion. In many curricula, the traditional circuit theory course is being replaced by a course in analog processing. The students should have basic exposure to KCL, KVL and simple circuits as well as a course in field theory or electromagnetism before taking this course. The book is basically in three modules. The first module covers complex power in single and three phase circuits, analysis of magnetic circuits, mutually coupled circuits and single phase transformers. The second module, drawing upon the quasi-static approximation of magnetic field equations, develops the concepts of electromechanical energy conversion, forces of electric origin leading to the dynamics equations of motion of the electromechanical system. A brief introduction to state space modeling, static equilibrium and stability is included. The third module discusses in the energy, co-energy framework, the torque of electric origin in synchronous, induction and DC machines. In each case, the equivalent circuit for the machine for steady state operation is developed for analysis purposes. A brief discussion of single phase motors is presented at the end.

Download or read book Embedded Controller Hardware Design written by Ken Arnold and published by Newnes. This book was released on 2001 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of electronics fundamentals -- Microcontroller concepts -- Worst-case timing, loading, analysis, and design -- Memory technologies and interfacing -- CPU bus interface and timing -- A detailed design example -- Programmable logic devices -- Basic I/O interfaces -- Other interfaces and bus cycles -- Other useful stuff -- Other interfaces.

Download or read book Basic Electronics for Scientists and Engineers written by Dennis L. Eggleston and published by Cambridge University Press. This book was released on 2011-04-28 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ideal for a one-semester course, this concise textbook covers basic electronics for undergraduate students in science and engineering. Beginning with the basics of general circuit laws and resistor circuits to ease students into the subject, the textbook then covers a wide range of topics, from passive circuits through to semiconductor-based analog circuits and basic digital circuits. Using a balance of thorough analysis and insight, readers are shown how to work with electronic circuits and apply the techniques they have learnt. The textbook's structure makes it useful as a self-study introduction to the subject. All mathematics is kept to a suitable level, and there are several exercises throughout the book. Password-protected solutions for instructors, together with eight laboratory exercises that parallel the text, are available online at www.cambridge.org/Eggleston.

Download or read book Electrical Circuits written by K. C. A. Smith and published by Cambridge University Press. This book was released on 1992-01-16 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Relevant applications to electronics, telecommunications and power systems are included in a comprehensive introduction to the theory of electronic circuits for physical science students.

Download or read book Demystifying Switched Capacitor Circuits written by Mingliang (Michael) Liu and published by Elsevier. This book was released on 2006-06-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps engineers to grasp fundamental theories and design principles by presenting physical and intuitive explanations of switched-capacitor circuits. Numerous circuit examples are discussed and the author emphasizes the most important and fundamental principles involved in implementing state-of-the-art switched-capacitor circuits for analog signal processing and power management applications. Throughout the book, the author presents numerous step-by-step tutorials and gives practical design examples.While some quantitative analysis is necessary to understand underlying concepts, tedious mathematical equations and formal proofs are avoided. An intuitive appreciation for switched-capacitor circuits is achieved.Much of the existing information on contemporary switched-capacitor circuit applications is in the form of applications notes and data sheets for various switched-capacitor ICs. This book compiles such information in a single volume and coherently organizes and structures it.The author has his own website at www.mingliangliu.com * Step-by-step tutorials which emphasize the most fundamental principals of switched-capacitor circuits * Few tedious mathematical equations * The first easy-to-understand compilation on this subject--most information available is not very cohesive

Download or read book Electronic Systems Maintenance Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2017-12-19 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: The days of troubleshooting a piece of gear armed only with a scope, voltmeter, and a general idea of how the hardware works are gone forever. As technology continues to drive equipment design forward, maintenance difficulties will continue to increase, and those responsible for maintaining this equipment will continue to struggle to keep up. The Electronic Systems Maintenance Handbook, Second Edition establishes a foundation for servicing, operating, and optimizing audio, video, computer, and RF systems. Beginning with an overview of reliability principles and properties, a team of top experts describes the steps essential to ensuring high reliability and minimum downtime. They examine heat management issues, grounding systems, and all aspects of system test and measurement. They even explore disaster planning and provide guidelines for keeping a facility running under extreme circumstances. Today more than ever, the reliability of a system can have a direct and immediate impact on the profitability of an operation. Advocating a carefully planned, systematic maintenance program, the richly illustrated Electronic Systems Maintenance Handbook helps engineers and technicians meet the challenges inherent in modern electronic equipment and ensure top quality performance from each piece of hardware.

Download or read book Control of Machines written by S. K. Bhattacharya and published by New Age International. This book was released on 2006-12 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Machines is one of the most important functional areas for electrical and mechanical engineers working in industry. In this era of automation and control, every engineer has to acquaint himself on the design installation, and maintenance of control systems. This subject must find its place as a compulsory applied engineering subject in degree and diploma curriculum.Some progressive states and autonomous institutions have already introduced this subject in their curriculum. In this book, static control and programmable controllers have been included keeping in view the latest developments in modern industry. Relay and static control have been dealt with in details. Most of the control circuits included in this book have been taken from Indian industry. A chapter has been devoted to protection of motors and troubleshooting in control circuits.The chapter on PLC has been made very elaborate to deal with all aspects of logic controllers. Review questions have been included at the end of each chapter. The explanations of circuits and design procedure of control circuits have been made very simple to help students understand easily. Students, teachers and shop floor and design office engineers will find this book a very useful companion.

Download or read book Electrical Installation Designs written by Bill Atkinson and published by John Wiley & Sons. This book was released on 2013-02-11 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and highly popular guide for electrical contractors of small installations, now fully revised in accordance with the latest wiring regulations The book is a clearly written practical guide on how to design and complete a range of electrical installation projects in a competitive manner, while ensuring full compliance with the new Wiring Regulations (updated late 2008). The updated regulations introduced changes in terminology, such as ‘basic’ and ‘fault protection’, and also changed the regulation numbers. This new edition reflects these changes. It discusses new sections covering domestic, commercial, industrial and agricultural projects, including material on marinas, caravan sites, and small scale floodlighting. This book provides guidance on certification and test methods, with full attention given to electrical safety requirements. Other brand new sections cover protective measures, additional protection by means of RCDs, the new cable guidelines for thin wall partitions and Part P of the Building Regulations. Provides simple, practical guidance on how to design electrical installation projects, including worked examples and case studies Covers new cable guidelines and Part P of the Building Regulations (Electrical Installations) in line with 17th edition of the Wiring Regulations BS 7671:2008 New chapters on protective measures and additional protection by means of RCDs (residual current devices) Features new wiring projects such as marinas, caravan sites and small scale floodlighting and street lighting Fully illustrated, including illustrations new to the fourth edition

Download or read book Automotive Electromagnetic Compatibility EMC written by Terence Rybak and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone who has operated, serviced, or designed an automobile or truck in the last few years has most certainly noticed that the age of electronics in our vehicles is here! Electronic components and systems are used for everything from the traditional entertainment system to the latest in “drive by wire”, to two-way communication and navigation. The interesting fact is that the automotive industry has been based upon mechanical and materials engineering for much of its history without many of the techniques of electrical and electronic engineering. The emissions controls requirements of the 1970’s are generally recognized as the time when electronics started to make their way into the previous mechanically based systems and functions. While this revolution was going on, the electronics industry developed issues and concepts that were addressed to allow interoperation of the systems in the presence of each other and with the external environment. This included the study of electromagnetic compatibility, as systems and components started to have influence upon each other just due to their operation. EMC developed over the years, and has become a specialized area of engineering applicable to any area of systems that included electronics. Many well-understood aspects of EMC have been developed, just as many aspects of automotive systems have been developed. We are now at a point where the issues of EMC are becoming more and more integrated into the automotive industry.