Download or read book Electronics Production Defects and Analysis written by Oommen Tharakan Kuttiyil Thomas and published by Springer Nature. This book was released on 2022-04-08 with total page 155 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a unique book capturing defects that are frequently encountered during various fabrication phases of electronic packages. These defects have been analyzed to their root cause and mitigation techniques and presented in the book. The book includes 228 cases with more than 480 color and magnified images of the defects. These defects are covered under eight subheads, viz soldering defects, PCB defects, mounting defects, conformal coating and potting defects, EEE component defects, workmanship defects, defects due to usage of non-FFF components, and defects in CAD layout. The possible reasons for the occurrence of the defects and the methods/practices by which they can be eliminated/mitigated have also been discussed. The chapter "mounting defects" shows the correct approach in the adjacent photograph, so that the users can refer to the right procedures. The book is helpful to those who are involved in the production of electronics packages to familiarize them with the different cases shown carefully and revised frequently. Exposure to the different defects is useful to all who are working in fabrication and quality control to realize a zero-defect product sans much time and investment. The book is valuable for the technical community working for aerospace applications, industry partners in the realization of space programs, aerospace, and high-reliability institutions, various electronic fabrication agencies in the country, engineers and technicians taking up courses in high-reliability soldering and fabrication techniques, and the students.
Download or read book CMOS Electronics written by Jaume Segura and published by John Wiley & Sons. This book was released on 2004-03-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS manufacturing environments are surrounded with symptoms that can indicate serious test, design, or reliability problems, which, in turn, can affect the financial as well as the engineering bottom line. This book educates readers, including non-engineers involved in CMOS manufacture, to identify and remedy these causes. This book instills the electronic knowledge that affects not just design but other important areas of manufacturing such as test, reliability, failure analysis, yield-quality issues, and problems. Designed specifically for the many non-electronic engineers employed in the semiconductor industry who need to reliably manufacture chips at a high rate in large quantities, this is a practical guide to how CMOS electronics work, how failures occur, and how to diagnose and avoid them. Key features: Builds a grasp of the basic electronics of CMOS integrated circuits and then leads the reader further to understand the mechanisms of failure. Unique descriptions of circuit failure mechanisms, some found previously only in research papers and others new to this publication. Targeted to the CMOS industry (or students headed there) and not a generic introduction to the broader field of electronics. Examples, exercises, and problems are provided to support the self-instruction of the reader.
Download or read book Reliability and Failure of Electronic Materials and Devices written by Milton Ohring and published by Academic Press. This book was released on 2014-10-14 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites
Download or read book Practical Reliability Of Electronic Equipment And Products written by Eugene R. Hnatek and published by CRC Press. This book was released on 2002-10-25 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Reliability of Electronic Equipment and Products will help electrical, electronics, manufacturing, mechanical, systems design, and reliability engineers; electronics production managers; electronic circuit designers; and upper-level undergraduate and graduate students in these disciplines.
Download or read book Electronics Process Technology written by Wilfried Sauer and published by Springer Science & Business Media. This book was released on 2007-04-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systemized presentation of new techniques and methods in electronics manufacture. It helps the reader reduce the cost and increase the reliability of electronic products by employing up-to-date technology. It also details the latest ideas for reducing the scale of electronic components and products to the nano-scale by organizing all the elements of the complicated modern electronics manufacturing process showing how they affect each other.
Download or read book Failure Analysis written by Marius Bazu and published by John Wiley & Sons. This book was released on 2011-03-08 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failure analysis is the preferred method to investigate product or process reliability and to ensure optimum performance of electrical components and systems. The physics-of-failure approach is the only internationally accepted solution for continuously improving the reliability of materials, devices and processes. The models have been developed from the physical and chemical phenomena that are responsible for degradation or failure of electronic components and materials and now replace popular distribution models for failure mechanisms such as Weibull or lognormal. Reliability engineers need practical orientation around the complex procedures involved in failure analysis. This guide acts as a tool for all advanced techniques, their benefits and vital aspects of their use in a reliability programme. Using twelve complex case studies, the authors explain why failure analysis should be used with electronic components, when implementation is appropriate and methods for its successful use. Inside you will find detailed coverage on: a synergistic approach to failure modes and mechanisms, along with reliability physics and the failure analysis of materials, emphasizing the vital importance of cooperation between a product development team involved the reasons why failure analysis is an important tool for improving yield and reliability by corrective actions the design stage, highlighting the ‘concurrent engineering' approach and DfR (Design for Reliability) failure analysis during fabrication, covering reliability monitoring, process monitors and package reliability reliability resting after fabrication, including reliability assessment at this stage and corrective actions a large variety of methods, such as electrical methods, thermal methods, optical methods, electron microscopy, mechanical methods, X-Ray methods, spectroscopic, acoustical, and laser methods new challenges in reliability testing, such as its use in microsystems and nanostructures This practical yet comprehensive reference is useful for manufacturers and engineers involved in the design, fabrication and testing of electronic components, devices, ICs and electronic systems, as well as for users of components in complex systems wanting to discover the roots of the reliability flaws for their products.
Download or read book Strategies for Electronics Test written by Craig Pynn and published by McGraw-Hill Companies. This book was released on 1986 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Failure Analysis Handbook written by Perry L. Martin and published by McGraw Hill Professional. This book was released on 1999 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation "In the Electronic Failure Analysis Handbook, you'll find top-to-bottom coverage of this rapidly developing field, encompassing breakthrough techniques and technologies for both components and systems reliability testing, performance evaluation, and liability avoidance."--BOOK JACKET. Title Summary field provided by Blackwell North America, Inc. All Rights Reserved.
Download or read book A Quality Management Case Study Defects in Spacecraft Electronics Components written by John A. Kuprenas and published by . This book was released on 1999 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production of spacecraft components presents a management challenge in that the systems are complex, costly to build and launch, and once a spacecraft is launched, it is extremely difficult and expensive to repair. For these reasons, strict standards for quality and reliability are essential. This paper presents a project quality management case study for the production of spacecraft electronics components as part of an overall spacecraft project. Printed circuit board data is examined by project managers using a Pareto analysis of different defect types to reveal process problems. Corrective actions to the production process that were implemented by project managers are explained, and ideas to improve future quality management studies, regardless of the industry, are discussed.
Download or read book Materials and Processing Failures in the Electronics and Computer Industry written by A. S. Brar and published by ASM International(OH). This book was released on 1993 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design for Excellence in Electronics Manufacturing written by Cheryl Tulkoff and published by John Wiley & Sons. This book was released on 2021-03-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to optimizing design for manufacturability and reliability from a team of experts Design for Excellence in Electronics Manufacturing is a comprehensive, state-of-the-art book that covers design and reliability of electronics. The authors—noted experts on the topic—explain how using the DfX concepts of design for reliability, design for manufacturability, design for environment, design for testability, and more, reduce research and development costs and decrease time to market and allow companies to confidently issue warranty coverage. By employing the concepts outlined in Design for Excellence in Electronics Manufacturing, engineers and managers can increase customer satisfaction, market share, and long-term profits. In addition, the authors describe the best practices regarding product design and show how the practices can be adapted for different manufacturing processes, suppliers, use environments, and reliability expectations. This important book: Contains a comprehensive review of the design and reliability of electronics Covers a range of topics: establishing a reliability program, design for the use environment, design for manufacturability, and more Includes technical information on electronic packaging, discrete components, and assembly processes Shows how aspects of electronics can fail under different environmental stresses Written for reliability engineers, electronics engineers, design engineers, component engineers, and others, Design for Excellence in Electronics Manufacturing is a comprehensive book that reveals how to get product design right the first time.
Download or read book Cost Analysis of Electronic Systems written by Peter Sandborn and published by World Scientific. This book was released on 2013 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the cost ramifications of design, manufacturing and life-cycle management decisions is of central importance to businesses associated with all types of electronic systems. Cost Analysis of Electronic Systems contains carefully developed models and theory that practicing engineers can directly apply to the modeling of costs for real products and systems. In addition, this book brings to light and models many contributions to life-cycle costs that practitioners are aware of but never had the tools or techniques to address quantitatively in the past.Cost Analysis of Electronic Systems melds elements of traditional engineering economics with manufacturing process and life-cycle cost management concepts to form a practical foundation for predicting the cost of electronic products and systems. Various manufacturing cost analysis methods are addressed including: process-flow, parametric, cost of ownership, and activity-based costing. The effects of learning curves, data uncertainty, test and rework processes, and defects are considered. Aspects of system sustainment and life-cycle cost modeling including reliability (warranty, burn-in), maintenance (sparing and availability), and obsolescence are treated. Finally, total cost of ownership of systems and return on investment are addressed.Real life design scenarios from integrated circuit fabrication, electronic systems assembly, substrate fabrication, and electronic systems managementare used as examples of the application of the cost estimation methods developed within the book.
Download or read book Six Sigma for Electronics Design and Manufacturing written by Sammy G. Shina and published by McGraw Hill Professional. This book was released on 2002-04-22 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Covers the nuts, bolts, and statistics of implementing Six Sigma in electronics manufacturing--includes case studies and detailed calculations
Download or read book Soldering in Electronics Assembly written by MIKE JUDD and published by Elsevier. This book was released on 1999-03-26 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Managers, engineers and technicians will use this book during industrial construction of electronics assemblies, whilst students can use the book to get a grasp of the variety of methods available, together with a discussion of technical concerns. It includes over 200 illustrations, including a photographic guide to defects, and contains many line drawings, tables and flow charts to illustrate the subject of electronics assembly. Soldering in Electronics Assembly looks theoretically at everything needed in a detailed study, but in a practical manner. It examines the soldering processes in the light of electronic assembly type; solder; flux; and cleaning requirements. It has information on every available process, from the most basic hand soldering through to latest innovatory ones such as inert atmosphere wave soldering and zoned forced convection infra-red machines. The book provides a detailed analysis of solder and soldering action; purpose of flux and relevant flux types for any application; classification of assembly variants; assessment and maintenance of solderability. There is also a detailed analysis of soldering process defects and causes. In addition, Soldering in Electronics Assembly contains a new chapter on Ball Grid Array (BGA) technology. - A practical guide for the industry covering all the main soldering processes currently in use - Cleaning, faults, troubleshooting and standards are all major topics - Considers safety and solder process quality assessment
Download or read book Industrial Environmental Performance Metrics written by National Academy of Engineering and National Research Council and published by National Academies Press. This book was released on 1999-08-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Environmental Performance Metrics is a corporate-focused analysis that brings clarity and practicality to the complex issues of environmental metrics in industry. The book examines the metrics implications to businesses as their responsibilities expand beyond the factory gateâ€"upstream to suppliers and downstream to products and services. It examines implications that arise from greater demand for comparability of metrics among businesses by the investment community and environmental interest groups. The controversy over what sustainable development means for businesses is also addressed. Industrial Environmental Performance Metrics identifies the most useful metrics based on case studies from four industriesâ€"automotive, chemical, electronics, and pulp and paperâ€"and includes specific corporate examples. It contains goals and recommendations for public and private sector players interested in encouraging the broader use of metrics to improve industrial environmental performance and those interested in addressing the tough issues of prioritization, weighting of metrics for meaningful comparability, and the longer term metrics needs presented by sustainable development.
Download or read book Troubleshooting Electronic Assembly written by Phil Zarrow and published by Pragma Media. This book was released on 2020-02-27 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: BoardTalk had its humble beginnings as a SMT expert Q&A session with Phil Zarrow and Jim Hall at an SMTAI conference. Ten years and over 200 episodes later, the "Assembly Brothers - Pick and Place" have transcribed their informative discussions from CircuitInsight.com, where BoardTalk is streamed all over the world.
Download or read book Reliability Engineering for Electronic Design written by Norman. B. Fuqua and published by CRC Press. This book was released on 2020-11-26 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the needs of electronic design engineers, reliability engineers, and their respective managers, stressing a pragmatic viewpoint rather than a vigorous mathematical presentation.
