Download or read book Control Systems for Power Electronics written by Mahesh Patil and published by Springer. This book was released on 2015-04-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the book covers most of the aspects as a primer on power electronics starting from a simple diode bridge to a DC-DC convertor using PWM control. The thyristor-bridge and the mechanism of designing a closed loop system are discussed in chapter one, two and three. The concepts are applied in the fourth chapter as a case study for buck converter which uses MOSFETs as switching devices and the closed loop system is elaborated in the fifth chapter. Chapter six is focused on the embedded system basics and the implementation of controls in the digital domain. Chapter seven is a case study of application of an embedded control system for a DC motor. With this book, the reader will find it easy to work on the practical control systems with microcontroller implementation. The core intent of this book is to help gain an accelerated learning path to practical control system engineering and transform control theory to an implementable control system through electronics. Illustrations are provided for most of the examples with fundamental mathematics along with simulations of the systems with their respective equations and stability calculations.

Download or read book Control Systems Technology written by Curtis D. Johnson and published by Pearson. This book was released on 2002 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents All of the major topics in modern analog and digital control systems, along with the practical, applications oriented knowledge and skills needed by technicians. It contains user-friendly conceptual explanations and clearly written mathematical developments. Examples of both Mathcad and MATLAB illustrate computer problem solving--but this book emphasizes the ability to use any suitable software to achieve successful results in solving problems and performing design. Chapter topics include Measurement; Laplace Transforms; Control System Models; Static and Dynamic Response; Stability; Frequency Response Analysis; Root Locus; State Variable Analysis; Introduction to Discrete Control Systems; Z-Transforms and Discrete State-Space Analysis; Digital Signal Representations; Discrete Time Control Systems; Stability of Discrete Control Systems; and Advanced Topics in Control Systems. For engineers and technicians working for companies that integrate control systems with the use of programmable logic controllers.

Download or read book Control Design Techniques in Power Electronics Devices written by Hebertt J. Sira-Ramirez and published by Springer Science & Business Media. This book was released on 2006-09-07 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals specifically with control theories relevant to the design of control units for switched power electronics devices, for the most part represented by DC–DC converters and supplies, by rectifiers of different kinds and by inverters with varying topologies. The theoretical methods for designing controllers in linear and nonlinear systems are accompanied by multiple case studies and examples showing their application in the emerging field of power electronics.

Download or read book Protecting Industrial Control Systems from Electronic Threats written by Joseph Weiss and published by Momentum Press. This book was released on 2010 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS

Download or read book Electricity Electronics and Control Systems for HVAC written by Thomas E. Kissell and published by Prentice Hall. This book was released on 2019-09-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Student supplement for: Electricity, Electronics, and Control Systems for HVAC, 4/e Thomas E. Kissell ISBN-10: 0131995685 ISBN-13: 9780131995680

Download or read book Power Electronics and Control Techniques for Maximum Energy Harvesting in Photovoltaic Systems written by Nicola Femia and published by CRC Press. This book was released on 2017-07-12 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incentives provided by European governments have resulted in the rapid growth of the photovoltaic (PV) market. Many PV modules are now commercially available, and there are a number of power electronic systems for processing the electrical power produced by PV systems, especially for grid-connected applications. Filling a gap in the literature, Power Electronics and Control Techniques for Maximum Energy Harvesting in Photovoltaic Systems brings together research on control circuits, systems, and techniques dedicated to the maximization of the electrical power produced by a photovoltaic (PV) source. Tools to Help You Improve the Efficiency of Photovoltaic Systems The book supplies an overview of recent improvements in connecting PV systems to the grid and highlights various solutions that can be used as a starting point for further research and development. It begins with a review of methods for modeling a PV array working in uniform and mismatched conditions. The book then discusses several ways to achieve the best maximum power point tracking (MPPT) performance. A chapter focuses on MPPT efficiency, examining the design of the parameters that affect algorithm performance. The authors also address the maximization of the energy harvested in mismatched conditions, in terms of both power architecture and control algorithms, and discuss the distributed MPPT approach. The final chapter details the design of DC/DC converters, which usually perform the MPPT function, with special emphasis on their energy efficiency. Get Insights from the Experts on How to Effectively Implement MPPT Written by well-known researchers in the field of photovoltaic systems, this book tackles state-of-the-art issues related to how to extract the maximum electrical power from photovoltaic arrays under any weather condition. Featuring a wealth of examples and illustrations, it offers practical guidance for researchers and industry professionals who want to implement MPPT in photovoltaic systems.

Download or read book Mechatronics written by William Bolton and published by Prentice Hall. This book was released on 1999 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The integration of electronic engineering, electrical engineering, computer technology and control engineering with mechanical engineering -- mechatronics -- now forms a crucial part in the design, manufacture and maintenance of a wide range of engineering products and processes. This book provides a clear and comprehensive introduction to the application of electronic control systems in mechanical and electrical engineering. It gives a framework of knowledge that allows engineers and technicians to develop an interdisciplinary understanding and integrated approach to engineering. This second edition has been updated and expanded to provide greater depth of coverage." -- Back cover.

Download or read book Electrical Control Systems in Industry written by Charles Seymour Siskind and published by McGraw-Hill/Glencoe. This book was released on 1963 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Systems Technology written by L. H. Fenical and published by Delmar Thomson Learning. This book was released on 2007 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broad range of topics is covered in this easy-to-understand book on all aspects of control system design and analysis. It begins with a straightforward review of the mathematics required to understand control systems technology, followed by an analysis of both continuous and discrete forms of control systems. Coverage then progresses to the use of MATLABA(R) for the analysis and response simulation of control system functions, such as the use of the SISO design tool and the LTI Viewer functions. Frequency response methods and discrete time systems are also explored in depth, along with the methods used for producing the required simulations using MATLABA(R).

Download or read book Power Electronic Control in Electrical Systems written by Enrique Acha and published by Newnes. This book was released on 2002-01-08 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within this book the fundamental concepts associated with the topic of power electronic control are covered alongside the latest equipment and devices, new application areas and associated computer-assisted methods. *A practical guide to the control of reactive power systems *Ideal for postgraduate and professional courses *Covers the latest equipment and computer-aided analysis.

Download or read book Electronic Control Systems written by Ross T Bannatyne and published by SAE International. This book was released on 2003-01-08 with total page 90 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Control Systems describes the evolution of electronic control systems and examines growth experienced in the four main system categories - safety and convenience, powertrain, body controls, and entertainment and communications. The system trends and technologies are covered in detail. The report concludes with a summary of the challenges, changes on the horizon, and a discussion of how sustainable competitive advantage can perhaps be achieved.

Download or read book Security ID Systems and Locks written by Joel Konicek and published by Butterworth-Heinemann. This book was released on 1997-04-17 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in clear and simple terms, Security, ID Systems and Locks provides the security professional with a complete understanding of all aspects of electronic access control. Each chapter includes important definitions, helpful study hints, highlighted review, and application questions. Security, ID Systems and Locks will teach you how to: Work with consultants Negotiate with dealers Select communications options Understand what computer professionals are saying Provide better security Throughout the book, the reader will find advice from security professionals, computer wizards, and seasoned trainers. Topics include a history of access control, modern ID technology, locks, barriers, sensors, computers, wiring, communications, and system design and integration. Joel Konicek has worked in almost every phase of the security industry. He is president and co-founder of Northern Computers, Inc., sits on the board of the Security Industry Association (SIA) and serves as SIA's Education Committee chairperson. He has lectured widely and conducted training seminars on sales and technical support issues. Karen Little, a technical writer and trainer, has been president of Clear Concepts since 1992. She provides research, writing, and illustrations for technical documentation, training manuals, Web sites, and interactive multimedia. Review questions and study tips make it easy to assess what you've learned Well-written and easy to understand, this is the most up-to-date book on electronic access control Coupons in the back of the book will save money on training programs in access control

Download or read book Electronic Access Control written by Thomas L. Norman and published by Elsevier. This book was released on 2011-09-26 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic Access Control introduces the fundamentals of electronic access control through clear, well-illustrated explanations. Access Control Systems are difficult to learn and even harder to master due to the different ways in which manufacturers approach the subject and the myriad complications associated with doors, door frames, hardware, and electrified locks. This book consolidates this information, covering a comprehensive yet easy-to-read list of subjects that every Access Control System Designer, Installer, Maintenance Tech or Project Manager needs to know in order to develop quality and profitable Alarm/Access Control System installations. Within these pages, Thomas L. Norman – a master at electronic security and risk management consulting and author of the industry reference manual for the design of Integrated Security Systems – describes the full range of EAC devices (credentials, readers, locks, sensors, wiring, and computers), showing how they work, and how they are installed. A comprehensive introduction to all aspects of electronic access control Provides information in short bursts with ample illustrations Each chapter begins with outline of chapter contents and ends with a quiz May be used for self-study, or as a professional reference guide

Download or read book Applied Control Theory for Embedded Systems written by Tim Wescott and published by Elsevier. This book was released on 2011-03-31 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment. Practical, down-to-earth guide teaches engineers to apply practical control theorems without needing to employ rigorous math Covers the latest concepts in control systems with embedded digital controllers

Download or read book Control in Power Electronics written by Marian P. Kazmierkowski and published by Elsevier. This book was released on 2002-08-30 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors were originally brought together to share research and applications through the international Danfoss Professor Programme at Aalborg University in Denmark. Personal computers would be unwieldy and inefficient without power electronic dc supplies. Portable communication devices and computers would also be impractical. High-performance lighting systems, motor controls, and a wide range of industrial controls depend on power electronics. In the near future we can expect strong growth in automotive applications, dc power supplies for communication systems, portable applications, and high-end converters. We are approaching a time when all electrical energy will be processed and controlled through power electronics somewhere in the path from generation to end use. The most up-to-date information available is presented in the text Written by a world renowned leader in the field

Download or read book Control Systems for Complete Idiots written by David SMITH and published by . This book was released on 2019-07-12 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this day and age everything around us is automatic and our desire to automate more stuff is only increasing. Control systems finds its applications in everything you can possibly think of. The concept of Control system plays an important role in the working of, everything from home appliances to guided missiles to self-driving cars. These are just the examples of Control systems we create. Control systems also exist in nature. Within our own body, there are numerous control systems, such as the pancreas, which regulate our blood sugar. In the most abstract sense it is possible to consider every physical object a control system. Hence from an engineering perspective, it is absolutely crucial to be familiar with the analysis and designing methods of such Control systems. Control systems is one of those subjects that go beyond a particular branch of engineering. Control systems find its application in Mechanical, Electrical, Electronics, Civil Engineering and many other branches of engineering. Although this book is written in an Electrical engineering context, we are sure that others can also easily follow the topics and learn a thing or two about Control systems.In this book we provide a concise introduction into classical Control theory. A basic knowledge of Calculus and some Physics are the only prerequisites required to follow the topics discussed in the book. In this book, We've tried to explain the various fundamental concepts of Control Theory in an intuitive manner with minimum math. Also, We've tried to connect the various topics with real life situations wherever possible. This way even first timers can learn the basics of Control systems with minimum effort. Hopefully the students will enjoy this different approach to Control Systems. The various concepts of the subject are arranged logically and explained in a simple reader-friendly language with MATLAB examples.This book is not meant to be a replacement for those standard Control systems textbooks, rather this book should be viewed as an introductory text for beginners to come in grips with advanced level topics covered in those books. This book will hopefully serve as inspiration to learn Control systems in greater depths.

Download or read book CONTROL SYSTEMS written by A. ANAND KUMAR and published by PHI Learning Pvt. Ltd.. This book was released on 2014-03-05 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text on control systems is designed for undergraduate students pursuing courses in electronics and communication engineering, electrical and electronics engineering, telecommunication engineering, electronics and instrumentation engineering, mechanical engineering, and biomedical engineering. Appropriate for self-study, the book will also be useful for AMIE and IETE students. Written in a student-friendly readable manner, the book, now in its Second Edition, explains the basic fundamentals and concepts of control systems in a clearly understandable form. It is a balanced survey of theory aimed to provide the students with an in-depth insight into system behaviour and control of continuous-time control systems. All the solved and unsolved problems in this book are classroom tested, designed to illustrate the topics in a clear and thorough way. NEW TO THIS EDITION• One new chapter on Digital control systems• Complete answers with figures• Root locus plots and Nyquist plots redrawn as per MATLAB output• MATLAB programs at the end of each chapter• Glossary at the end of chapters KEY FEATURES• Includes several fully worked-out examples to help students master the concepts involved. • Provides short questions with answers at the end of each chapter to help students prepare for exams confidently.• Offers fill in the blanks and objective type questions with answers at the end of each chapter to quiz students on key learning points.• Gives chapter-end review questions and problems to assist students in reinforcing their knowledge. Solution Manual is available for adopting faculty.