Download or read book Electronic Structural and Optical Properites of Three Phases of Titanium Dioxide written by Shang-Di Mo and published by . This book was released on 1995 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Structure Methods for Complex Materials written by Wai-Yim Ching and published by OUP Oxford. This book was released on 2012-05-17 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Density functional theory (DFT) has blossomed in the past few decades into a powerful tool that is used by experimentalists and theoreticians alike. This book highlights the extensive contributions that the DFT-based OLCAO method has made to progress in this field, and it demonstrates its competitiveness for performing ab initio calculations on large and complex models of practical systems. A brief historical account and introduction to the elements of the theory set the stage for discussions on semiconductors, insulators, crystalline metals and alloys, complex crystals, non-crystalline solids and liquids, microstructure containing systems and those containing impurities, defects, and surfaces, biomolecular systems, and the technique of ab initio core level spectroscopy calculation.
Download or read book First principles Investigations of Electronic Structures of Pristine and Doped Anatase Titanium Dioxide written by Yushan Wang and published by . This book was released on 2007 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapters 4 through 6 are mainly concerned with insights into the mechanism of optical excitation in anatase TiO2. Chapters 7 and 8 are concerned with TiO2-based dilute magnetic semiconductors (DMS).
Download or read book Handbook of Advanced Ceramics written by Shigeyuki Somiya and published by Academic Press. This book was released on 2003-09-17 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: A two-volume reference set for all ceramicists, both in research and working in industry The only definitive reference covering the entire field of advanced ceramics from fundamental science and processing to application Contributions from over 50 leading researchers from around the world This new Handbook will be an essential resource for ceramicists. It includes contributions from leading researchers around the world, and includes sections on: Basic Science of Advanced Ceramic, Functional Ceramics (electro-ceramics and optoelectro-ceramics) and engineering ceramics.Contributions from over 50 leading researchers from around the world
Download or read book Nanostructured Titanium Dioxide in Photocatalysis written by It-Meng Low and published by CRC Press. This book was released on 2021-06-18 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide (TiO2) has drawn considerable attention as an attractive inorganic raw material for various applications due to its inexpensiveness, nontoxic nature, stability, and excellent photocatalytic activity. Photocatalysis is one of the most promising route for sustainable chemistry of the 21st century. It can contribute to solving environmental, global energy, and chemical problems, as well as to the sustainable production of commodities in the near future. This book presents the fundamentals of photocatalysis in nanostructured TiO2 and describes the factors affecting the photocatalytic activity, design, and synthesis of various forms of nanostructured TiO2. It highlights the use of ion-doping and inert-atmosphere annealing to extend the light-absorption range of photocatalysts and reduce recombination between electrons and holes. It discusses numerous applications in the fields of energy and environment, such as water purification, gas sensing, storage and delivery, and energy generation. The book is an invaluable resource and useful guide for a broad readership in various fields of catalysis, materials science, environment, and energy.
Download or read book Optical Properties of the Rutile Form of Titanium Dioxide written by Leei Chang and published by . This book was released on 1959 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Communication Devices and Networking written by Rabindranath Bera and published by Springer. This book was released on 2018-05-23 with total page 923 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides insights of International Conference in Communication, Devices and Networking (ICCDN 2017) organized by the Department of Electronics and Communication Engineering, Sikkim Manipal Institute of Technology, Sikkim, India during 3 – 4 June, 2017. The book discusses latest research papers presented by researchers, engineers, academicians and industry professionals. It also assists both novice and experienced scientists and developers, to explore newer scopes, collect new ideas and establish new cooperation between research groups and exchange ideas, information, techniques and applications in the field of electronics, communication, devices and networking.
Download or read book Properties of Complex Inorganic Solids written by A. Gonis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is common practice today to use the term "alloy" in connection with specific classes of materials, with prominence given to metals and semiconductors. However, there is good justification for considering alloys in a unified manner based on properties rather than types of materials because, after all, to alloy means to mix. The scientific aspects of mixing together different materials has a very long history going back to early attempts to understand and control materials behavior for the service of mankind. The case for using the scientific term "alloy" to mean any material consisting of more than one element can be based on the following two considerations. First, many alloys are mixtures of metallic, semiconducting, and/or insulating materials, and the properties of an alloy, i.e., metallic, semiconducting, or insulating, are often functions of composition and of external conditions, such as temperature and pressure. Second, and most importantly, in attempting to understand the various properties of materials, whether physical, chemical, or mechanical,one is apt to use the terminology and experimental, formal, and computational methods in their study that transcend the type of material being studied.
Download or read book Electronic and Optical Properties of Anodic Oxide Films on Titanium written by Nacir Tit and published by . This book was released on 1991 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: -Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications -Includes black TiO2 based cancer theranostics in its coverage -Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.
Download or read book Industrial Chemistry of Oxides for Emerging Applications written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable insights into the extraction, production, and properties of a large number of natural and synthetic oxides utilized in applications worldwide from ceramics, electronic components, and coatings This handbook describes each of the major oxides chronologically—starting from the processes of extraction of ores containing oxides, their purification and transformations into pure alloyed powders, and their appropriate characterization up to the processes of formation of 2D films by such methods as PVD, CVD, and coatings by thermal spraying or complicated 3D objects by sintering and rapid prototyping. The selection of oxides has been guided by the current context of industrial applications. An important point that is considered in the book concerns the strategic aspects of oxides. Some oxides (e.g. rare earth ones) become more expensive due to the growing demand for them, others, because of the strategic importance of countries producing raw materials and the countries that are using them. Industrial Chemistry of Oxides for Emerging Applications provides readers with everything they need to know in 7 chapters that cover: technical and economical importance of oxides in present and future; fundamentals of oxides manufacturing; extraction, properties, and applications of Al2O3; extraction, properties, and applications of ZrO2; synthesis, properties, and applications of YBaCu2O7x; extraction, properties, and applications of TiO2; and synthesis, properties, and application of hydroxyapatite. Presents the extraction, production, and properties of a large fraction of oxides applications worldwide, both natural as well as synthetic multi‐oxides Covers a very important segment of many industrial processes, such as refractories and piezoelectric oxides—both applications constituting very large market segments Developed from a lecture course given by the authors for over a decade Industrial Chemistry of Oxides for Emerging Applications is an excellent text for university professors and teachers, and graduate and postgraduate students with a solid background in physics and chemistry.
Download or read book Titanium Dioxide written by Magdalena Janus and published by BoD – Books on Demand. This book was released on 2017-07-26 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is mainly used as a pigment and photocatalyst. It is possible to find it in food, cosmetics, building materials, electric devices, and others. This book contains chapters about characteristics of anatase and rutile crystallographic structure of titanium dioxide and the use of theoretical calculation for photoactivity determination.
Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.
Download or read book Theoretical and Computational Photochemistry written by García Iriepa Cristina and published by Elsevier. This book was released on 2023-04-21 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theoretical and Computational Photochemistry: Fundamentals, Methods, Applications and Synergy with Experimental Approaches provides a comprehensive overview of photoactive systems and photochemical processes. After an introduction to photochemistry, the book discusses the key computational chemistry methods applied to the study of light-induced processes over the past decade, and further outlines recent research topics to which these methods have been applied. By discussing the synergy between experimental and computational data, the book highlights how theoretical studies could facilitate understanding experimental findings. This helpful guide is for both theoretical chemists and experimental photochemistry researchers interested in utilizing computational photochemistry methods for their own work. - Reviews the fundamentals of photochemistry, helping those new to the field in understanding key concepts - Provides detailed guidance and comparison of computational and theoretical methods, highlighting the suitability of each method for different case studies - Outlines current applications to encourage discussion of the synergy between experimental and computational data, and inspiring further application of these methods to other photochemical processes
Download or read book Influence of Thickness on Structural and Optical Properties of Titanium Oxide Thin Layers written by Haleh Kangarlou and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Influence of Thickness on Structural and Optical Properties of Titanium Oxide Thin Layers.
Download or read book Photocatalysts written by Sher Bahadar Khan and published by BoD – Books on Demand. This book was released on 2019-03-06 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enlightens the type, chemical structure, and application of photo-catalysts. It covers the recent developments in photo-catalysts and their applications, particularly in photo-catalytic degradation of different organic pollutants, hydrogen production, etc. It provides a concise but complete coverage and overview of photocatalysts and their recent advances for a broad audience: beginners, graduate students, and specialists in both academic and industrial sectors.
Download or read book Industrial Chemistry of Oxides for Emerging Applications written by Lech Pawlowski and published by John Wiley & Sons. This book was released on 2018-03-02 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Valuable insights into the extraction, production, and properties of a large number of natural and synthetic oxides utilized in applications worldwide from ceramics, electronic components, and coatings This handbook describes each of the major oxides chronologically—starting from the processes of extraction of ores containing oxides, their purification and transformations into pure alloyed powders, and their appropriate characterization up to the processes of formation of 2D films by such methods as PVD, CVD, and coatings by thermal spraying or complicated 3D objects by sintering and rapid prototyping. The selection of oxides has been guided by the current context of industrial applications. An important point that is considered in the book concerns the strategic aspects of oxides. Some oxides (e.g. rare earth ones) become more expensive due to the growing demand for them, others, because of the strategic importance of countries producing raw materials and the countries that are using them. Industrial Chemistry of Oxides for Emerging Applications provides readers with everything they need to know in 7 chapters that cover: technical and economical importance of oxides in present and future; fundamentals of oxides manufacturing; extraction, properties, and applications of Al2O3; extraction, properties, and applications of ZrO2; synthesis, properties, and applications of YBaCu2O7x; extraction, properties, and applications of TiO2; and synthesis, properties, and application of hydroxyapatite. Presents the extraction, production, and properties of a large fraction of oxides applications worldwide, both natural as well as synthetic multi‐oxides Covers a very important segment of many industrial processes, such as refractories and piezoelectric oxides—both applications constituting very large market segments Developed from a lecture course given by the authors for over a decade Industrial Chemistry of Oxides for Emerging Applications is an excellent text for university professors and teachers, and graduate and postgraduate students with a solid background in physics and chemistry.
