Download or read book Properties of Gallium Arsenide written by M. R. Brozel and published by Inst of Engineering & Technology. This book was released on 1996 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: It was in 1986 that INSPEC (The Information Division of the Institution of Electrical Engineers) published the book Properties of Gallium Arsenide. Since then, major developments have taken place. This third edition is comprised of 150 specially commissioned articles contributed by experts from the USA, Europe and Japan.

Download or read book Solid State Properties written by Mildred Dresselhaus and published by Springer. This book was released on 2018-01-17 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book fills a gap between many of the basic solid state physics and materials sciencebooks that are currently available. It is written for a mixed audience of electricalengineering and applied physics students who have some knowledge of elementaryundergraduate quantum mechanics and statistical mechanics. This book, based on asuccessful course taught at MIT, is divided pedagogically into three parts: (I) ElectronicStructure, (II) Transport Properties, and (III) Optical Properties. Each topic is explainedin the context of bulk materials and then extended to low-dimensional materials whereapplicable. Problem sets review the content of each chapter to help students to understandthe material described in each of the chapters more deeply and to prepare them to masterthe next chapters.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1986 with total page 1338 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Low dimensional Semiconductors written by M. J. Kelly and published by Clarendon Press. This book was released on 1995-11-23 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a first attempt to pull together the whole of semiconductor science and technology since 1970 in so far as semiconductor multilayers are concerned. Material, technology, physics and device issues are described with approximately equal emphasis, and form a single coherant point of view. The subject matter is the concern of over half of today's active semiconductor scientists and technologists, the remainder working on bulk semiconductors and devices. It is now routine to design and the prepare semiconductor multilayers at a time, with independent control over the dropping and composition in each layer. In turn these multilayers can be patterned with features that as a small as a few atomic layers in lateral extent. The resulting structures open up many new ares of exciting solid state and quantum physics. They have also led to whole new generations of electronic and optoelectronic devices whose superior performance relates back to the multilayer structures. The principles established in the field have several decades to go, advancing towards the ultimate of materials engineering, the design and preparation of solids atom by atom. The book should appeal equally to physicists, electronic engineers and materials scientists.

Download or read book Physics of Optoelectronic Devices written by Shun Lien Chuang and published by Wiley-Interscience. This book was released on 1995-09-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes the theory of semiconductor optoelectronic devices, demonstrating comparisons between theoretical and experimental results. Presents such important topics as semiconductor heterojunctions and band structure calculations near the band edges for bulk and quantum-well semiconductors. Details semiconductor lasers including double-heterostructure, stripe-geometry gain-guided semiconductor, distributed feedback and surface-emitting. Systematically investigates high-speed modulation of semiconductor lasers using linear and nonlinear gains. Features new subjects such as the theories on the band structures of strained semiconductors and strained quantum-well lasers. Covers key areas behind the operation of semiconductor lasers, modulators and photodetectors. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department

Download or read book Physics Briefs written by and published by . This book was released on 1990 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Band Theory and Electronic Properties of Solids written by John Singleton and published by OUP Oxford. This book was released on 2001-08-30 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to band theory and the electronic properties of materials at a level suitable for final-year undergraduates or first-year graduate students. It sets out to provide the vocabulary and quantum-mechanical training necessary to understand the electronic, optical and structural properties of the materials met in science and technology and describes some of the experimental techniques which are used to study band structure today. In order to leave space for recent developments, the Drude model and the introduction of quantum statistics are treated synoptically. However, Bloch's theorem and two tractable limits, a very weak periodic potential and the tight-binding model, are developed rigorously and in three dimensions. Having introduced the ideas of bands, effective masses and holes, semiconductor and metals are treated in some detail, along with the newer ideas of artificial structures such as super-lattices and quantum wells, layered organic substances and oxides. Some recent `hot topics' in research are covered, e.g. the fractional Quantum Hall Effect and nano-devices, which can be understood using the techniques developed in the book. In illustrating examples of e.g. the de Haas-van Alphen effect, the book focuses on recent experimental data, showing that the field is a vibrant and exciting one. References to many recent review articles are provided, so that the student can conduct research into a chosen topic at a deeper level. Several appendices treating topics such as phonons and crystal structure make the book self-contained introduction to the fundamentals of band theory and electronic properties in condensed matter physic today.

Download or read book Physical Properties of III V Semiconductor Compounds written by Sadao Adachi and published by John Wiley & Sons. This book was released on 1992-11-10 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is two-fold: to examine key properties of III-V compounds and to present diverse material parameters and constants of these semiconductors for a variety of basic research and device applications. Emphasis is placed on material properties not only of Inp but also of InAs, GaAs and GaP binaries.

Download or read book Many Body Quantum Theory in Condensed Matter Physics written by Henrik Bruus and published by Oxford University Press. This book was released on 2004-09-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an introduction to quantum field theory applied to condensed matter physics. The topics cover modern applications in electron systems and electronic properties of mesoscopic systems and nanosystems. The textbook is developed for a graduate or advanced undergraduate course with exercises which aim at giving students the ability to confront real problems.

Download or read book Applied Nanophotonics written by Sergey V. Gaponenko and published by Cambridge University Press. This book was released on 2019 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible yet rigorous introduction to nanophotonics, covering basic principles, technology, and applications in lighting, lasers, and photovoltaics. Providing a wealth of information on materials and devices, and over 150 color figures, it is the 'go-to' guide for students in electrical engineering taking courses in nanophotonics.

Download or read book Resonant Tunneling in Semiconductors written by L.L. Chang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the NATO Advanced Research Workshop on "Resonant Tunneling in Semiconductors: Physics and Applications", held at Escorial, Spain, on May 14-18, 1990. The tremendous growth in the past two decades in the field of resonant tunneling in semiconductor heterostructures has followed, if not outpaced, the expansion wit nessed in quantum structures in general. Resonant tunneling shares also the multi disciplinary nature of that broad area, with an emphasis on the underlying physics but with a coverage of material systems on the one end and device applications on the other. Indeed, that resonant tunneling provides great flexibility in terms of materials and configurations and that it is inherently a fast process with obvious device impli cations by the presence of a negative differential resistance have contributed to the unrelenting interest in this field. These proceedings consist of 49 refereed articles; they correspond to both invited and contributed talks at the workshop. Because of the intertwinning nature of the subject matter, it has been difficult to subdivide them in well-defined sections. Instead, they are arranged in several broad categories, meant to serve only as guidelines of emphasis on different topics and aspects. The book starts with an introduction to res onant tunneling by providing a perspective of the field in the first article. This is fol lowed by discussions of different material systems with various band-structure effects.

Download or read book Physical Foundations of Solid State Devices written by E. Fred Schubert and published by E. Fred Schubert. This book was released on 2022-02-22 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is beneficial for technical personnel working in the field of microelectronics, optoelectronics, and photonics to get a good understanding of the physical foundations of modern semiconductor devices. Questions that technical personnel may ask are: How are electrons propagating in the periodic potential of a crystal lattice? What are the foundations of semiconductor heterostructure devices? How does quantum mechanics relate to semiconductor heterostructures? This book tries to answer questions such as these. The book provides a basis for the understanding of modern semiconductor devices that have dimensions in the nanometer range, that is, comparable to the electron de Broglie wavelength. For such small spatial dimensions, classical physics no longer gives a full description of physical processes. The inclusion of quantum mechanical principles becomes mandatory and provides a useful description of common physical processes in electronic, optoelectronic, and photonic devices. Chapters 1 to 11 teach the quantum‐mechanical principles, including the postulates of quantum mechanics, operators, the uncertainty principle, the Schrödinger equation, non‐periodic and periodic potentials, quantum wells, and perturbation theory. Chapters 12 to 20 apply these principles to semiconductor devices and discuss the density of states, semiconductor statistics, carrier concentrations, doping, tunneling, and aspects of heterostructure devices. The 2022 edition is a complete revision of the 2015 edition and also updates the formatting to make it easily viewable with electronic display devices.

Download or read book Transport in Nanostructures written by David K. Ferry and published by Cambridge University Press. This book was released on 2009-08-20 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advent of semiconductor structures whose characteristic dimensions are smaller than the mean free path of carriers has led to the development of novel devices, and advances in theoretical understanding of mesoscopic systems or nanostructures. This book has been thoroughly revised and provides a much-needed update on the very latest experimental research into mesoscopic devices and develops a detailed theoretical framework for understanding their behaviour. Beginning with the key observable phenomena in nanostructures, the authors describe quantum confined systems, transmission in nanostructures, quantum dots, and single electron phenomena. Separate chapters are devoted to interference in diffusive transport, temperature decay of fluctuations, and non-equilibrium transport and nanodevices. Throughout the book, the authors interweave experimental results with the appropriate theoretical formalism. The book will be of great interest to graduate students taking courses in mesoscopic physics or nanoelectronics, and researchers working on semiconductor nanostructures.

Download or read book Optical Properties of Solids written by Frederick Wooten and published by Academic Press. This book was released on 2013-10-22 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optical Properties of Solids covers the important concepts of intrinsic optical properties and photoelectric emission. The book starts by providing an introduction to the fundamental optical spectra of solids. The text then discusses Maxwell's equations and the dielectric function; absorption and dispersion; and the theory of free-electron metals. The quantum mechanical theory of direct and indirect transitions between bands; the applications of dispersion relations; and the derivation of an expression for the dielectric function in the self-consistent field approximation are also encompassed. The book further tackles current-current correlations; the fluctuation-dissipation theorem; and the effect of surface plasmons on optical properties and photoemission. People involved in the study of the optical properties of solids will find the book invaluable.

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book 2D Monoelemental Materials Xenes and Related Technologies written by Zongyu Huang and published by CRC Press. This book was released on 2022-04-19 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monoelemental 2D materials called Xenes have a graphene-like structure, intra-layer covalent bond, and weak van der Waals forces between layers. Materials composed of different groups of elements have different structures and rich properties, making Xenes materials a potential candidate for the next generation of 2D materials. 2D Monoelemental Materials (Xenes) and Related Technologies: Beyond Graphene describes the structure, properties, and applications of Xenes by classification and section. The first section covers the structure and classification of single-element 2D materials, according to the different main groups of monoelemental materials of different components and includes the properties and applications with detailed description. The second section discusses the structure, properties, and applications of advanced 2D Xenes materials, which are composed of heterogeneous structures, produced by defects, and regulated by the field. Features include: Systematically detailed single element materials according to the main groups of the constituent elements Classification of the most effective and widely studied 2D Xenes materials Expounding upon changes in properties and improvements in applications by different regulation mechanisms Discussion of the significance of 2D single-element materials where structural characteristics are closely combined with different preparation methods and the relevant theoretical properties complement each other with practical applications Aimed at researchers and advanced students in materials science and engineering, this book offers a broad view of current knowledge in the emerging and promising field of 2D monoelemental materials.

Download or read book Fundamentals of Solid State Engineering written by Manijeh Razeghi and published by Springer Science & Business Media. This book was released on 2006-06-12 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a multidisciplinary introduction to quantum mechanics, solid state physics, advanced devices, and fabrication Covers wide range of topics in the same style and in the same notation Most up to date developments in semiconductor physics and nano-engineering Mathematical derivations are carried through in detail with emphasis on clarity Timely application areas such as biophotonics , bioelectronics