Download or read book Digital Signal Processing in Power Electronics Control Circuits written by Krzysztof Sozański and published by Springer Science & Business Media. This book was released on 2013-07-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many digital control circuits in current literature are described using analog transmittance. This may not always be acceptable, especially if the sampling frequency and power transistor switching frequencies are close to the band of interest. Therefore, a digital circuit is considered as a digital controller rather than an analog circuit. This helps to avoid errors and instability in high frequency components. Digital Signal Processing in Power Electronics Control Circuits covers problems concerning the design and realization of digital control algorithms for power electronics circuits using digital signal processing (DSP) methods. This book bridges the gap between power electronics and DSP. The following realizations of digital control circuits are considered: digital signal processors, microprocessors, microcontrollers, programmable digital circuits. Discussed in this book is signal processing, starting from analog signal acquisition, through its conversion to digital form, methods of its filtration and separation, and ending with pulse control of output power transistors. The book is focused on two applications for the considered methods of digital signal processing: an active power filter and a digital class D power amplifier. The major benefit to readers is the acquisition of specific knowledge concerning discussions on the processing of signals from voltage or current sensors using a digital signal processor and to the signals controlling the output inverter transistors. Included are some Matlab examples for illustration of the considered problems.

Download or read book Digital Filters and Signal Processing in Electronic Engineering written by S M Bozic and published by Elsevier. This book was released on 1998-10-01 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: From industrial and teaching experience the authors provide a blend of theory and practice of digital signal processing (DSP) for advanced undergraduate and post-graduate engineers reading electronics. This fast-moving, developing area is driven by the information technology revolution. It is a source book in research and development for embedded system design engineers, designers in real-time computing, and applied mathematicians who apph DSP techniques in telecommunications, aerospace (control systems), satellite communications, instrumentation, and medical technology (ultrasound and magnetic resonance imaging).The book is particularly useful at the hardware end of DSP, with its emphasis on practical I)SP devices and the integration of basic processes with appropriate software. It is unique to find in one volume the implementation of the equations as algorithms, not only in \IATLAB but right up to a working DSP-based scheme. Other relevant architectural features include number representations, multiply-accumulate, special addressing modes, zero overhead iteration schemes. and single and multiple nlicroprocessors which will allow the readers to compare and understand both current processors and future DSP developments.Fundamental signal processing procedures are introduced and developed: also convolution. correlation, the Discrete Fourier Transform and its fast computation algorithms. Then follo finite impulse response (FIR) filters, infinite impulse response (IlR) filters, multirate filters, adaptive filters, and topics from communication and control. I)esign examples are given in all of these cases, taken through an algorithm testing stage using MATLAB. The design of the latter. using C language models, is explained together with the experimental results of real time integer implementations.Academic prerequisites are first and second year university mathematics, an introductor knowledge of circuit theor ‘and microprocessors. and C Language. Provides an unusual blend of theory and practice of digital signal processing (DSP) Discusses fundamental signal processing procedures, convolution, correlation, the Discrete Fourier Transform and its fast computation algorithms Includes number representations, multiply-accumulate, special addressing modes, zero overhead iteration schemes, and single and multiple instructions

Download or read book Digital Processing of Random Signals written by Boaz Porat and published by Courier Dover Publications. This book was released on 2008-02-29 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent advanced text rigorously covers several topics. Geared toward students of electrical engineering, its material is sufficiently general to be applicable to other engineering fields. 1994 edition.

Download or read book Digital Signal Processing written by Li Tan and published by Academic Press. This book was released on 2013-01-21 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing, Second Edition enables electrical engineers and technicians in the fields of biomedical, computer, and electronics engineering to master the essential fundamentals of DSP principles and practice. Many instructive worked examples are used to illustrate the material, and the use of mathematics is minimized for easier grasp of concepts. As such, this title is also useful to undergraduates in electrical engineering, and as a reference for science students and practicing engineers. The book goes beyond DSP theory, to show implementation of algorithms in hardware and software. Additional topics covered include adaptive filtering with noise reduction and echo cancellations, speech compression, signal sampling, digital filter realizations, filter design, multimedia applications, over-sampling, etc. More advanced topics are also covered, such as adaptive filters, speech compression such as PCM, u-law, ADPCM, and multi-rate DSP and over-sampling ADC. New to this edition: MATLAB projects dealing with practical applications added throughout the book New chapter (chapter 13) covering sub-band coding and wavelet transforms, methods that have become popular in the DSP field New applications included in many chapters, including applications of DFT to seismic signals, electrocardiography data, and vibration signals All real-time C programs revised for the TMS320C6713 DSK Covers DSP principles with emphasis on communications and control applications Chapter objectives, worked examples, and end-of-chapter exercises aid the reader in grasping key concepts and solving related problems Website with MATLAB programs for simulation and C programs for real-time DSP

Download or read book Digital Media Processing written by Hazarathaiah Malepati and published by Newnes. This book was released on 2010-06-25 with total page 769 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multimedia processing demands efficient programming in order to optimize functionality. Data, image, audio, and video processing, some or all of which are present in all electronic devices today, are complex programming environments. Optimized algorithms (step-by-step directions) are difficult to create but can make all the difference when developing a new application. This book discusses the most current algorithms available that will maximize your programming keeping in mind the memory and real-time constraints of the architecture with which you are working. A wide range of algorithms is covered detailing basic and advanced multimedia implementations, along with, cryptography, compression, and data error correction. The general implementation concepts can be integrated into many architectures that you find yourself working with on a specific project. Analog Devices' BlackFin technology is used for examples throughout the book. Discusses how to decrease algorithm development times to streamline your programming Covers all the latest algorithms needed for contrained systems Includes case studies on WiMAX, GPS, and portable media players

Download or read book Programs for Digital Signal Processing written by IEEE Acoustics, Speech, and Signal Processing Society. Digital Signal Processing Committee and published by . This book was released on 1979 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Briefly describes the physical characteristics, the habitat, and the behavior of the Alaskan brown bear.

Download or read book One Dimensional Digital Signal Processing written by Chi-Tsong Chen and published by CRC Press. This book was released on 1979-11-01 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Digital Signal Processing written by Richard A. Haddad and published by Computer Science Press, Incorporated. This book was released on 1991-01-01 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for graduate students and signal processing practitioners with an introductory background in DSP, this new text gives representative coverage of advanced topics (orthogonal expansions, optimal filters, and two-dimensional DSP), and advanced aspects of familiar topics (fast transforms beyond the FFT, non-uniform sampling and quantization). Providing a self-contained blending of DSP theory, applications to speech and image processing, and state-of-the-art DSP hardware, Digital Signal Processing includes: introductory DSP concepts summarized in five appendixes; DSP filter algorithms - e.g.subband and median filters; least squares, optimal, and adaptive filters spectral estimation and deconvolution; speech and image processing applications; and DSP hardware realizations.

Download or read book Digital Signal Processing Using MATLAB Wavelets written by Michael Weeks and published by Jones & Bartlett Publishers. This book was released on 2011 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although Digital Signal Processing (DSP) has long been considered an electrical engineering topic, recent developments have also generated significant interest from the computer science community. DSP applications in the consumer market, such as bioinformatics, the MP3 audio format, and MPEG-based cable/satellite television have fueled a desire to understand this technology outside of hardware circles. Designed for upper division engineering and computer science students as well as practicing engineers and scientists, Digital Signal Processing Using MATLAB & Wavelets, Second Edition emphasizes the practical applications of signal processing. Over 100 MATLAB examples and wavelet techniques provide the latest applications of DSP, including image processing, games, filters, transforms, networking, parallel processing, and sound. This Second Edition also provides the mathematical processes and techniques needed to ensure an understanding of DSP theory. Designed to be incremental in difficulty, the book will benefit readers who are unfamiliar with complex mathematical topics or those limited in programming experience. Beginning with an introduction to MATLAB programming, it moves through filters, sinusoids, sampling, the Fourier transform, the z-transform and other key topics. Two chapters are dedicated to the discussion of wavelets and their applications. A CD-ROM (platform independent) accompanies the book and contains source code, projects for each chapter, and the figures from the book.

Download or read book Advanced Digital Signal Processing written by Glenn Zelniker and published by CRC Press. This book was released on 1993-10-28 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a detailed treatment of the concepts and applications of advanced digital signal processing.

Download or read book Introduction to Digital Signal Processing written by Robert Meddins and published by Newnes. This book was released on 2000-09-05 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Digital Signal Processing covers the basic theory and practice of digital signal processing (DSP) at an introductory level. As with all volumes in the Essential Electronics Series, this book retains the unique formula of minimal mathematics and straightforward explanations. The author has included examples throughout of the standard software design package, MATLAB and screen dumps are used widely throughout to illustrate the text. Ideal for students on degree and diploma level courses in electric and electronic engineering, 'Introduction to Digital Signal Processing' contains numerous worked examples throughout as well as further problems with solutions to enable students to work both independently and in conjunction with their course. Assumes only minimum knowledge of mathematics and electronics Concise and written in a straightforward and accessible style Packed with worked examples, exercises and self-assesment questions

Download or read book Digital Signal Processing written by Richard A. Roberts and published by Prentice Hall. This book was released on 1987-01 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disucsses the theory associated with the processing of digital signals, including new material on implementation details of digital filters. For advanced level students in electrical engineering and for computer and electrical engineering professionals.

Download or read book Digital Image Processing written by J M Blackledge and published by Elsevier. This book was released on 2005-11-30 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative text (the second part of a complete MSc course) provides mathematical methods required to describe images, image formation and different imaging systems, coupled with the principle techniques used for processing digital images. It is based on a course for postgraduates reading physics, electronic engineering, telecommunications engineering, information technology and computer science. This book relates the methods of processing and interpreting digital images to the ‘physics’ of imaging systems. Case studies reinforce the methods discussed, with examples of current research themes. Provides mathematical methods required to describe images, image formation and different imaging systems Outlines the principle techniques used for processing digital images Relates the methods of processing and interpreting digital images to the ‘physics’ of imaging systems

Download or read book Electronic Digital System Fundamentals written by Dale R. Patrick and published by The Fairmont Press, Inc.. This book was released on 2008 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Understanding Digital Signal Processing with MATLAB and Solutions written by Alexander D. Poularikas and published by CRC Press. This book was released on 2017-11-13 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses receiving signals that most electrical engineers detect and study. The vast majority of signals could never be detected due to random additive signals, known as noise, that distorts them or completely overshadows them. Such examples include an audio signal of the pilot communicating with the ground over the engine noise or a bioengineer listening for a fetus’ heartbeat over the mother’s. The text presents the methods for extracting the desired signals from the noise. Each new development includes examples and exercises that use MATLAB to provide the answer in graphic forms for the reader's comprehension and understanding.

Download or read book Digital Signal Processing 101 written by Michael Parker and published by Newnes. This book was released on 2010-05-26 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing 101: Everything You Need to Know to Get Started provides a basic tutorial on digital signal processing (DSP). Beginning with discussions of numerical representation and complex numbers and exponentials, it goes on to explain difficult concepts such as sampling, aliasing, imaginary numbers, and frequency response. It does so using easy-to-understand examples and a minimum of mathematics. In addition, there is an overview of the DSP functions and implementation used in several DSP-intensive fields or applications, from error correction to CDMA mobile communication to airborne radar systems. This book is intended for those who have absolutely no previous experience with DSP, but are comfortable with high-school-level math skills. It is also for those who work in or provide components for industries that are made possible by DSP. Sample industries include wireless mobile phone and infrastructure equipment, broadcast and cable video, DSL modems, satellite communications, medical imaging, audio, radar, sonar, surveillance, and electrical motor control. Dismayed when presented with a mass of equations as an explanation of DSP? This is the book for you! Clear examples and a non-mathematical approach gets you up to speed with DSP Includes an overview of the DSP functions and implementation used in typical DSP-intensive applications, including error correction, CDMA mobile communication, and radar systems

Download or read book Introductory Digital Signal Processing with Computer Applications written by Paul A. Lynn and published by John Wiley & Sons. This book was released on 1998-06-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: "An excellent introductory book" —Review of the First Edition in the International Journal of Electrical Engineering Education "… it will serve as a reference book in this area for a long time" —Review of Revised Edition in Zentralblatt für Mathematik (Germany) Firmly established as the essential introductory Digital Signal Processing (DSP) text, this second edition reflects the growing importance of random digital signals and random DSP in the undergraduate syllabus by including two new chapters. The authors' practical, problem-solving approach to DSP continues in this new material, which is backed up by additional worked examples and computer programs. The book now features: fundamentals of digital signals and systems time and frequency domain analysis and processing, including digital convolution and the Discrete and Fast Fourier Transforms design and practical application of digital filters description and processing of random signals, including correlation, filtering, and the detection of signals in noise Programs in C and equivalent PASCAL are listed in an appendix. Typical results and graphic plots from all the programs are illustrated and discussed in the main text. The overall approach assumes no prior knowledge of electronics, computing, or DSP. An ideal text for undergraduate students in electrical, electronic and other branches of engineering, computer science, applied mathematics and physics. Practising engineers and scientists will also find this a highly accessible introduction to an increasingly important field.