Download or read book Electronic Device Fabrication and Characterization Based on Two dimensional Materials written by Zhengfeng Yang and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2D Materials for Electronics Sensors and Devices written by Saptarshi Das and published by Elsevier. This book was released on 2022-09-14 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Materials for Electronics, Sensors and Devices: Synthesis, Characterization, Fabrication and Application provides an overview of various top-down and bottom-up synthesis techniques, along with stitching, stacking and stoichiometric control methods for different 2D materials and their heterostructures. The book focuses on the widespread applications of various 2D materials in high-performance and low-power sensors, field effect devices, flexible electronics, straintronics, spintronics, brain-inspired electronics, energy harvesting and energy storage devices. This is an important reference for materials scientists and engineers looking to gain a greater understanding on how 2D materials are being used to create a range of low cost, sustainable products and devices. - Discusses the major synthesis and preparation methods of a range of emerging 2D electronic materials - Provides state-of–the-art information on the most recent advances, including theoretical and experimental studies and new applications - Discusses the major challenges of the mass application of 2D materials in industry
Download or read book Electronic Devices Based on 2D Material Fabrication Characterization and Analysis written by Jialun Liu and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GaN based Materials and Devices written by Michael Shur and published by World Scientific. This book was released on 2004 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The unique materials properties of GaN-based semiconductors havestimulated a great deal of interest in research and developmentregarding nitride materials growth and optoelectronic andnitride-based electronic devices. High electron mobility andsaturation velocity, high sheet carrier concentration atheterojunction interfaces, high breakdown field, and low thermalimpedance of GaN-based films grown over SiC or bulk AlN substratesmake nitride-based electronic devices very promising.
Download or read book Two dimensional Materials written by Pramoda Kumar Nayak and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are only a few discoveries and new technologies in materials science that have the potential to dramatically alter and revolutionize our material world. Discovery of two-dimensional (2D) materials, the thinnest form of materials to ever occur in nature, is one of them. After isolation of graphene from graphite in 2004, a whole other class of atomically thin materials, dominated by surface effects and showing completely unexpected and extraordinary properties, has been created. This book provides a comprehensive view and state-of-the-art knowledge about 2D materials such as graphene, hexagonal boron nitride (h-BN), transition metal dichalcogenides (TMD) and so on. It consists of 11 chapters contributed by a team of experts in this exciting field and provides latest synthesis techniques of 2D materials, characterization and their potential applications in energy conservation, electronics, optoelectronics and biotechnology.
Download or read book Device Fabrication and Quantum Transport Characterization of Atomically Thin Two dimensional Materials written by Liheng An and published by . This book was released on 2020 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Layered 2D Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-04-27 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ever since the discovery of graphene, two-dimensional layered materials (2DLMs) have been the central tool of the materials research community. The reason behind their importance is their superlative and unique electronic, optical, physical, chemical and mechanical properties in layered form rather than in bulk form. The 2DLMs have been applied to electronics, catalysis, energy, environment, and biomedical applications. The following topics are discussed in the book’s fifteen chapters: • The research status of the 2D metal-organic frameworks and the different techniques used to synthesize them. • 2D black phosphorus (BP) and its practical application in various fields. • Reviews the synthesis methods of MXenes and provides a detailed discussion of their structural characterization and physical, electrochemical and optical properties, as well as applications in catalysis, energy storage, environmental management, biomedicine, and gas sensing. • The carbon-based materials and their potential applications via the photocatalytic process using visible light irradiation. • 2D materials like graphene, TMDCs, few-layer phosphorene, MXene in layered form and their heterostructures. • The structure and applications of 2D perovskites. • The physical parameters of pristine layered materials, ZnO, transition metal dichalcogenides, and heterostructures of layered materials are discussed. • The coupling of graphitic carbon nitride with various metal sulfides and oxides to form efficient heterojunction for water purification. • The structural features, synthetic methods, properties, and different applications and properties of 2D zeolites. • The methods for synthesizing 2D hollow nanostructures are featured and their structural aspects and potential in medical and non-medical applications. • The characteristics and structural aspects of 2D layered double hydroxides (LDHs) and the various synthesis methods and role of LDH in non-medical applications as adsorbent, sensor, catalyst, etc. • The synthesis of graphene-based 2D layered materials synthesized by using top-down and bottom-up approaches where the main emphasis is on the hot-filament thermal chemical vapor deposition (HFTCVD) method. • The different properties of 2D h-BN and borophene and the various methods being used for the synthesis of 2D h-BN, along with their growth mechanism and transfer techniques. • The physical properties and current progress of various transition metal dichalcogenides (TMDC) based on photoactive materials for photoelectrochemical (PEC) hydrogen evolution reaction. • The state-of-the-art of 2D layered materials and associated devices, such as electronic, biosensing, optoelectronic, and energy storage applications.
Download or read book 2D Nanoelectronics written by Mircea Dragoman and published by Springer. This book was released on 2016-12-01 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the new two-dimensional one-atomic-layer-thick materials such as graphene, metallic chalcogenides, silicene and other 2D materials. The book describes their main physical properties and applications in nanoelctronics, photonics, sensing and computing. A large part of the book deals with graphene and its amazing physical properties. Another important part of the book deals with semiconductor monolayers such as MoS2 with impressive applications in photonics, and electronics. Silicene and germanene are the atom-thick counterparts of silicon and germanium with impressive applications in electronics and photonics which are still unexplored. Consideration of two-dimensional electron gas devices conclude the treatment. The physics of 2DEG is explained in detail and the applications in THz and IR region are discussed. Both authors are working currently on these 2D materials developing theory and applications.
Download or read book Monatomic Two Dimensional Layers written by Iwao Matsuda and published by Elsevier. This book was released on 2018-08-22 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Monatomic Two-Dimensional Layers: Properties, Fabrication and Industrial Applications provides a detailed examination on basic principles and state-of-the-art experimental techniques for monatomic layers on model surfaces, and in operating devices. Both conventional surface science and novel 2D materials science are included. The reader is guided through an introduction to the basic science of the field that is followed by advanced science specific to the system. Characterization techniques, the principles of state-of-the-art instruments for monatomic layers, and topics, including positron diffraction, time-resolved photoemission spectroscopy, surface transport measurements, and operando nanospectroscopy are also covered. Researchers, graduate students and professionals will find this volume invaluable to acquire a deeper knowledge of the basic science, preparation, and experimental characterization techniques for 2D materials. Industrial technicians and operators will find it a useful overview of surface science related methods for fabrication and characterization of 2D materials. - Gives comprehensive access to the properties of 2D materials, selected fabrication methods, and advanced characterization tools - Discusses structure analysis by diffraction methods and 'operando' spectroscopy to provide direct information on device performance for industrial applications - Written by authors who developed the techniques and have conducted extensive research on monatomic layers
Download or read book 2D Nanoscale Heterostructured Materials written by Satyabrata Jit and published by Elsevier. This book was released on 2020-05-09 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Nanoscale Heterostructured Materials: Synthesis, Properties, and Applications assesses the current status and future prospects for 2D materials other than graphene (e.g., BN nanosheets, MoS2, NbSe2, WS2, etc.) that have already been contemplated for both low-end and high-end technological applications. The book offers an overview of the different synthesis techniques for 2D materials and their heterostructures, with a detailed explanation of the many potential future applications. It provides an informed overview and fundamentals properties related to the 2D Transition metal dichalcogenide materials and their heterostructures. The book helps researchers to understand the progress of this field and points the way to future research in this area. - Explores synthesis techniques of newly evolved 2D materials and their heterostructures with controlled properties - Offers detailed analysis of the fundamental properties (via various experimental process and simulations techniques) of 2D heterostructures materials - Discusses the applications of 2D heterostructured materials in various high-performance devices
Download or read book Synthesis Modelling and Characterization of 2D Materials and their Heterostructures written by Eui-Hyeok Yang and published by Elsevier. This book was released on 2020-06-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis, Modelling and Characterization of 2D Materials and Their Heterostructures provides a detailed discussion on the multiscale computational approach surrounding atomic, molecular and atomic-informed continuum models. In addition to a detailed theoretical description, this book provides example problems, sample code/script, and a discussion on how theoretical analysis provides insight into optimal experimental design. Furthermore, the book addresses the growth mechanism of these 2D materials, the formation of defects, and different lattice mismatch and interlayer interactions. Sections cover direct band gap, Raman scattering, extraordinary strong light matter interaction, layer dependent photoluminescence, and other physical properties. - Explains multiscale computational techniques, from atomic to continuum scale, covering different time and length scales - Provides fundamental theoretical insights, example problems, sample code and exercise problems - Outlines major characterization and synthesis methods for different types of 2D materials
Download or read book Synthesis Characterization and Device Applications of Two dimensional Materials written by Ali Mohsin and published by . This book was released on 2018 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-dimensional (2D) materials have attracted tremendous research interest, as they offer novel physics, facile visualization by electron and scanning probe microscopy, and the potential to become next-generation electronic materials, all due to reduced dimensionality. Large-area 2D single crystals are needed for both fundamental scientific experiments and electronic device applications. New methods need to be developed to exploit state-of-the-art microscopy in the scientific investigation of 2D materials. Mechanisms behind the behavior of 2D-material based devices need to be resolved and new device concepts and applications need to be explored. This dissertation addresses these three aspects of 2D materials research. Using chemical vapor deposition growth of graphene on copper as a platform, the first part of my research in this thesis demonstrates a facile method involving a simple in-situ treatment of the copper catalytic substrate right before the growth that results in mm-sized graphene single crystals, elucidating the key factors of achieving large-area 2D single crystals. The second part of this work developed experimental methods to resolve important issues in 2D materials research by employing modern transmission electron microscopy. Here, a method has been developed to determine the edge orientation and termination without imaging the edge down to the atomic scale of monolayer hexagonal boron nitride (h-BN), enabling a direct comparison to theoretical predictions. Another important issue in 2D materials research is the determination of the layer count and its lateral spatial uniformity. In this work, a method is developed to map the layer count of a 2D material at nanometer-scale lateral resolution over extended areas, utilizing a combination of mass-thickness mapping offered by STEM and element-specific quantization afforded by electron energy loss spectrum (EELS) mapping. The last part of this thesis work unravels the multiple mechanisms behind the behavior of field effect transistors (FETs) based on PdSe2. The change in device behavior in early reports from ambipolar to n channel was puzzling. As commonly encountered in device research, many factors, including channel material properties, defects, contaminants, and contact effects, are almost always entangled. Here, I use multiple control devices to unravel various mechanisms and provide consistent explanations for device behvior variations.
Download or read book Advanced Materials for Printed Flexible Electronics written by Colin Tong and published by Springer Nature. This book was released on 2021-10-04 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to printed flexible electronics and their applications, including the basics of modern printing technologies, printable inks, performance characterization, device design, modeling, and fabrication processes. A wide range of materials used for printed flexible electronics are also covered in depth. Bridging the gap between the creation of structure and function, printed flexible electronics have been explored for manufacturing of flexible, stretchable, wearable, and conformal electronics device with conventional, 3D, and hybrid printing technologies. Advanced materials such as polymers, ceramics, nanoparticles, 2D materials, and nanocomposites have enabled a wide variety of applications, such as transparent conductive films, thin film transistors, printable solar cells, flexible energy harvesting and storage devices, electroluminescent devices, and wearable sensors. This book provides students, researchers and engineers with the information to understand the current status and future trends in printed flexible electronics, and acquire skills for selecting and using materials and additive manufacturing processes in the design of printed flexible electronics.
Download or read book Spintronic 2D Materials written by Wenqing Liu and published by Woodhead Publishing. This book was released on 2019-11-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spintronic 2D Materials: Fundamentals and Applications provides an overview of the fundamental theory of 2D electronic systems that includes a selection of the most intensively investigated 2D materials. The book tells the story of 2D spintronics in a systematic and comprehensive way, providing the growing community of spintronics researchers with a key reference. Part One addresses the fundamental theoretical aspects of 2D materials and spin transport, while Parts Two through Four explore 2D material systems, including graphene, topological insulators, and transition metal dichalcogenides. Each section discusses properties, key issues and recent developments. In addition, the material growth method (from lab to mass production), device fabrication and characterization techniques are included throughout the book. - Discusses the fundamentals and applications of spintronics of 2D materials, such as graphene, topological insulators and transition metal dichalcogenides - Includes an in-depth look at each materials system, from material growth, device fabrication and characterization techniques - Presents the latest solutions on key challenges, such as the spin lifetime of 2D materials, spin-injection efficiency, the potential proximity effects, and much more
Download or read book 2D Semiconducting Materials for Electronic Photonic and Optoelectronic Devices written by Anuj Kumar and published by CRC Press. This book was released on 2024-11-07 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two-dimensional semiconducting materials (2D-SCMs) are the subject of intensive study in the fields of photonics and optoelectronics because of their unusual optical, electrical, thermal, and mechanical properties. The main objective of 2D Semiconducting Materials for Electronic, Photonic, and Optoelectronic Devices is to provide current, state-of-the-art knowledge of two-dimensional semiconducting materials for various applications. Two-dimensional semiconducting materials are the basic building blocks for making photodiodes, light-emitting diodes, light-detecting devices, data storage, telecommunications, and energy-storage devices. When it comes to two-dimensional semiconducting materials, electronic, photonic, and optoelectronic applications, as well as future plans for improving performance, no modern book covers as much ground. The planned book will fill such gaps by offering a comprehensive analysis of two-dimensional semiconducting materials. This book covers a range of advanced 2D materials, their fundamentals, and the chemistry for many emerging applications. All the chapters are covered by experts in these areas around the world, making this a suitable textbook for students and providing new guidelines to researchers and industries. • Covers topics such as fundamentals and advanced knowledge of two-dimensional semiconducting materials • Provides details about the recent methods used for the synthesis, characterization, and applications of two-dimensional semiconducting materials • Covers the state-of-the-art development in two-dimensional semiconducting materials and their emerging applications This book provides directions to students, scientists, and researchers in semiconductors and related disciplines to help them better understand the physics, characteristics, and applications of 2D semiconductors.
Download or read book Emerging 2D Materials and Devices for the Internet of Things written by Li Tao and published by Elsevier. This book was released on 2020-06-12 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging 2D Materials and Devices for the Internet of Things: Information, Sensing and Energy Applications summarizes state-of-the-art technologies in applying 2D layered materials, discusses energy and sensing device applications as essential infrastructure solutions, and explores designs that will make internet-of-things devices faster, more reliable and more accessible for the creation of mass-market products. The book focuses on information, energy and sensing applications, showing how different types of 2D materials are being used to create a new generation of products and devices that harness the capabilities of wireless technology in an eco-efficient, reliable way. This book is an important resource for both materials scientists and engineers, who are designing new wireless products in a variety of industry sectors. - Explores how 2D materials are being used to create faster and more reliable wireless network solutions - Discusses how graphene-based nanocomposites are being used for energy harvesting and storage applications - Outlines the major challenges for integrating 2D materials in electronic sensing devices
Download or read book 2D Materials written by and published by Academic Press. This book was released on 2016-06-24 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Materials contains the latest information on the current frontier of nanotechnology, the thinnest form of materials to ever occur in nature. A little over 10 years ago, this was a completely unknown area, not thought to exist. However, since then, graphene has been isolated and acclaimed, and a whole other class of atomically thin materials, dominated by surface effects and showing completely unexpected and extraordinary properties has been created. This book is ideal for a variety of readers, including those seeking a high-level overview or a very detailed and critical analysis. No nanotechnologist can currently overlook this new class of materials. - Presents one of the first detailed books on this subject of nanotechnology - Contains contributions from a great line-up of authoritative contributors that bring together theory and experiments - Ideal for a variety of readers, including those seeking a high-level overview or a very detailed and critical analysis
