Download or read book Electromagnetics for Engineering Students Part 2 written by Sameir M. Ali Hamed and published by Bentham Science Publishers. This book was released on 2018-04-09 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagmetics for Engineering Students is a textbook in two parts, Part I and II, that cover all topics of electromagnetics needed for undergraduate students from vector analysis to antenna principles. In both parts of the book, the topics are presented in sufficient details such that the students will follow the analytical development easily. Each chapter is supported by many illustrative examples, solved problems, and the end of chapter problems to explain the principles of the topics and enhance the knowledge of the student. There are a total of 681 problems in the both parts of the book as follows: 162 illustrative examples, 88 solved problems, and 431 end of chapter problems. This part is a continuation of Part I and focuses on the application of Maxwell's equations and the concepts that are covered in Part I to analyze the characteristics of wave propagation in half-space and bounded media including metamaterials. Moreover, a chapter has been devoted to the topic of antennas to provide readers with the fundamental concepts related to antenna engineering. The key features of this part: • In addition to the coverage of classical topics in electromagnetic normally covered in the similar available texts, this part of the book adds some advanced concepts and topics such as: • Application of multi-pole expansion for vector potentials. • More detailed analysis on the topic of waveguides including circular waveguides. • Refraction through metamaterials and the concept of negative refractive index. • Detailed and easy-to follow presentation of mathematical analyses and problems. • An appendix of mathematical formulae and functions.
Download or read book Electromagnetics written by Steven Ellingson and published by . This book was released on 2019-12-13 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electromagnetics for Engineering Students written by Sameir M. Ali Hamed and published by . This book was released on 2017-09-21 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetics for Engineering Students starts with an introduction to vector analysis and progressive chapters provide readers with information about dielectric materials, electrostatic and magnetostatic fields, as well as wave propagation in different situations. Each chapter is supported by many illustrative examples and solved problems which serve to explain the principles of the topics and enhance the knowledge of students. In addition to the coverage of classical topics in electromagnetics, the book explains advanced concepts and topics such as the application of multi-pole expansion for scalar and vector potentials, boundary-value problems in cylindrical and spherical coordinate systems, metamaterials, artificial magnetic conductors, the concept of negative refractive index, and the detailed analysis of circular waveguides.Key features of this text book include:detailed and easy-to follow presentation of mathematical analyses and problemsa total of 681 problems (162 illustrative examples, 88 solved problems, and 431 end of chapter problems)an appendix of mathematical formulae and functionsElectromagnetics for Engineering Students is an ideal text book for undergraduate engineering students who are learning about electromagnetics and related mathematical theorems.
Download or read book Engineering Electromagnetics written by Nathan Ida and published by Springer Science & Business Media. This book was released on 2007-08-01 with total page 1262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text not only provides students with a good theoretical understanding of electromagnetic field equations but it also treats a large number of applications. No topic is presented unless it is directly applicable to engineering design or unless it is needed for the understanding of another topic. Included in this new edition are more than 400 examples and exercises, exercising every topic in the book. Also to be found are 600 end-of-chapter problems, many of them applications or simplified applications. A new chapter introducing numerical methods into the electromagnetic curriculum discusses the finite element, finite difference and moment methods.
Download or read book Engineering Electromagnetics written by Nathan Ida and published by Springer. This book was released on 2015-03-20 with total page 1062 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides students with a thorough theoretical understanding of electromagnetic field equations and it also treats a large number of applications. The text is a comprehensive two-semester textbook. The work treats most topics in two steps – a short, introductory chapter followed by a second chapter with in-depth extensive treatment; between 10 to 30 applications per topic; examples and exercises throughout the book; experiments, problems and summaries. The new edition includes: modifications to about 30-40% of the end of chapter problems; a new introduction to electromagnetics based on behavior of charges; a new section on units; MATLAB tools for solution of problems and demonstration of subjects; most chapters include a summary. The book is an undergraduate textbook at the Junior level, intended for required classes in electromagnetics. It is written in simple terms with all details of derivations included and all steps in solutions listed. It requires little beyond basic calculus and can be used for self-study. The wealth of examples and alternative explanations makes it very approachable by students. More than 400 examples and exercises, exercising every topic in the book Includes 600 end-of-chapter problems, many of them applications or simplified applications Discusses the finite element, finite difference and method of moments in a dedicated chapter
Download or read book Introduction to Engineering Electromagnetics written by Yeon Ho Lee and published by Springer Science & Business Media. This book was released on 2013-03-26 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides students with the missing link that can help them master the basic principles of electromagnetics. The concept of vector fields is introduced by starting with clear definitions of position, distance, and base vectors. The symmetries of typical configurations are discussed in detail, including cylindrical, spherical, translational, and two-fold rotational symmetries. To avoid serious confusion between symbols with two indices, the text adopts a new notation: a letter with subscript 1-2 for the work done in moving a unit charge from point 2 to point 1, in which the subscript 1-2 mimics the difference in potentials, while the hyphen implies a sense of backward direction, from 2 to 1. This text includes 300 figures in which real data are drawn to scale. Many figures provide a three-dimensional view. Each subsection includes a number of examples that are solved by examining rigorous approaches in steps. Each subsection ends with straightforward exercises and answers through which students can check if they correctly understood the concepts. A total 350 examples and exercises are provided. At the end of each section, review questions are inserted to point out key concepts and relations discussed in the section. They are given with hints referring to the related equations and figures. The book contains a total of 280 end-of-chapter problems.
Download or read book Theory and Computation of Electromagnetic Fields written by Jian-Ming Jin and published by John Wiley & Sons. This book was released on 2015-08-10 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the fundamental concepts behind the theory and computation of electromagnetic fields The book is divided in two parts. The first part covers both fundamental theories (such as vector analysis, Maxwell’s equations, boundary condition, and transmission line theory) and advanced topics (such as wave transformation, addition theorems, and fields in layered media) in order to benefit students at all levels. The second part of the book covers the major computational methods for numerical analysis of electromagnetic fields for engineering applications. These methods include the three fundamental approaches for numerical analysis of electromagnetic fields: the finite difference method (the finite difference time-domain method in particular), the finite element method, and the integral equation-based moment method. The second part also examines fast algorithms for solving integral equations and hybrid techniques that combine different numerical methods to seek more efficient solutions of complicated electromagnetic problems. Theory and Computation of Electromagnetic Fields, Second Edition: Provides the foundation necessary for graduate students to learn and understand more advanced topics Discusses electromagnetic analysis in rectangular, cylindrical and spherical coordinates Covers computational electromagnetics in both frequency and time domains Includes new and updated homework problems and examples Theory and Computation of Electromagnetic Fields, Second Edition is written for advanced undergraduate and graduate level electrical engineering students. This book can also be used as a reference for professional engineers interested in learning about analysis and computation skills.
Download or read book Engineering Electromagnetics written by William H. Hayt, Jr and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Electromagnetics 2 written by David Voltmer and published by Springer Nature. This book was released on 2022-05-31 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second of two volumes which have been created to provide an understanding of the basic principles and applications of electromagnetic fields for electrical engineering students. Fundamentals of Electromagnetics Vol 2: Quasistatics and Waves examines how the low-frequency models of lumped elements are modified to include parasitic elements. For even higher frequencies, wave behavior in space and on transmission lines is explained. Finally, the textbook concludes with details of transmission line properties and applications. Upon completion of this book and its companion Fundamentals of Electromagnetics Vol 1: Internal Behavior of Lumped Elements, with a focus on the DC and low-frequency behavior of electromagnetic fields within lumped elements, students will have gained the necessary knowledge to progress to advanced studies of electromagnetics.
Download or read book Electromagnetics Volume 1 BETA written by Steven W. Ellingson and published by VT Publishing. This book was released on 2018-01-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetics (CC BY-SA 4.0) is an open textbook intended to serve as a primary textbook for a one-semester first course in undergraduate engineering electromagnetics, and includes:electric and magnetic fields; electromagnetic properties of materials; electromagnetic waves; and devices that operate according to associated electromagnetic principles including resistors,capacitors, inductors, transformers, generators, and transmission lines. This book employs the "transmission lines first" approach, in which transmission lines are introduced using a lumped-element equivalent circuit model fora differential length of transmission line, leading to one-dimensional wave equations for voltage and current. This book is intended for electrical engineering students in the third year of a bachelor of science degree program. A free electronic version of this book is available at: https://doi.org/10.7294/W4WQ01ZM
Download or read book Advanced Engineering Electromagnetics written by Constantine A. Balanis and published by John Wiley & Sons. This book was released on 2012-01-24 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: Balanis’ second edition of Advanced Engineering Electromagnetics – a global best-seller for over 20 years – covers the advanced knowledge engineers involved in electromagnetic need to know, particularly as the topic relates to the fast-moving, continually evolving, and rapidly expanding field of wireless communications. The immense interest in wireless communications and the expected increase in wireless communications systems projects (antenna, microwave and wireless communication) points to an increase in the number of engineers needed to specialize in this field. In addition, the Instructor Book Companion Site contains a rich collection of multimedia resources for use with this text. Resources include: Ready-made lecture notes in Power Point format for all the chapters. Forty-nine MATLAB® programs to compute, plot and animate some of the wave phenomena Nearly 600 end-of-chapter problems, that's an average of 40 problems per chapter (200 new problems; 50% more than in the first edition) A thoroughly updated Solutions Manual 2500 slides for Instructors are included.
Download or read book Fundamentals of Electric Power Engineering written by Massimo Ceraolo and published by John Wiley & Sons. This book was released on 2014-04-07 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a tool for any engineer who wants to learn about circuits, electrical machines and drives, power electronics, and power systems basics From time to time, engineers find they need to brush up on certain fundamentals within electrical engineering. This clear and concise book is the ideal learning tool for them to quickly learn the basics or develop an understanding of newer topics. Fundamentals of Electric Power Engineering: From Electromagnetics to Power Systems helps nonelectrical engineers amass power system information quickly by imparting tools and trade tricks for remembering basic concepts and grasping new developments. Created to provide more in-depth knowledge of fundamentals—rather than a broad range of applications only—this comprehensive and up-to-date book: Covers topics such as circuits, electrical machines and drives, power electronics, and power system basics as well as new generation technologies Allows nonelectrical engineers to build their electrical knowledge quickly Includes exercises with worked solutions to assist readers in grasping concepts found in the book Contains “in-depth” side bars throughout which pique the reader’s curiosity Fundamentals of Electric Power Engineering is an ideal refresher course for those involved in this interdisciplinary branch. For supplementary files for this book, please visit http://booksupport.wiley.com
Download or read book Fundamentals of Electromagnetics 2 written by David Russell Voltmer and published by Morgan & Claypool Publishers. This book was released on 2007 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first of two volumes which have been created to provide an understanding of the basic principles and applications of electromagnetic fields for electrical engineering students. Fundamentals of Electromagnetics Vol 1: Internal Behavior of Lumped Elements focuses upon the DC and low-frequency behavior of electromagnetic fields within lumped elements. The properties of electromagnetic fields provide the basis for predicting the terminal characteristics of resistors, capacitors, and inductors. The properties of magnetic circuits are included as well. For slightly higher frequencies for which the lumped elements are a significant fraction of a wavelength in size the second volume of this set, Fundamentals of Electromagnetics Vol 2: Quasistatics and Waves, examines how the low-frequency models of lumped elements are modified to include parasitic elements. Upon completion of understanding the two volumes of this book, students will have gained the necessary knowledge to progress to advanced studies of electromagnetics.
Download or read book Electromagnetics for Engineers written by Fawwaz Tayssir Ulaby and published by Pearson/Education. This book was released on 2008-07-01 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Electromagnetics offered in Electrical Engineering departments and Applied Physics. Designed specifically for a one-semester EM course covering both statics and dynamics, the book uses a number of tools to facilitate understanding of EM concepts and to demonstrate their relevance to modern technology. Technology Briefs provide overviews of both fundamental and sophisticated technologies, including the basic operation of an electromagnet in magnetic recording, the invention of the laser, and how EM laws underlie the operation of many types of sensors, bar code readers, GPS, communication satellites, and X-Ray tomography, among others.A CD-ROM packed with video presentations and solved problems accompanies the tex
Download or read book Theory and Computation of Electromagnetic Fields written by Jian-Ming Jin and published by John Wiley & Sons. This book was released on 2015-08-26 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews the fundamental concepts behind the theory and computation of electromagnetic fields The book is divided in two parts. The first part covers both fundamental theories (such as vector analysis, Maxwell’s equations, boundary condition, and transmission line theory) and advanced topics (such as wave transformation, addition theorems, and fields in layered media) in order to benefit students at all levels. The second part of the book covers the major computational methods for numerical analysis of electromagnetic fields for engineering applications. These methods include the three fundamental approaches for numerical analysis of electromagnetic fields: the finite difference method (the finite difference time-domain method in particular), the finite element method, and the integral equation-based moment method. The second part also examines fast algorithms for solving integral equations and hybrid techniques that combine different numerical methods to seek more efficient solutions of complicated electromagnetic problems. Theory and Computation of Electromagnetic Fields, Second Edition: Provides the foundation necessary for graduate students to learn and understand more advanced topics Discusses electromagnetic analysis in rectangular, cylindrical and spherical coordinates Covers computational electromagnetics in both frequency and time domains Includes new and updated homework problems and examples Theory and Computation of Electromagnetic Fields, Second Edition is written for advanced undergraduate and graduate level electrical engineering students. This book can also be used as a reference for professional engineers interested in learning about analysis and computation skills.
Download or read book Essentials of Electromagnetics for Engineering written by David A. de Wolf and published by Cambridge University Press. This book was released on 2001 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: A clearly written introduction to the key physical and engineering principles of electromagnetics, first published in 2000.
Download or read book Low Frequency Electromagnetic Modeling for Electrical and Biological Systems Using MATLAB written by Sergey N. Makarov and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a detailed and systematic description of the Method of Moments (Boundary Element Method) for electromagnetic modeling at low frequencies and includes hands-on, application-based MATLAB® modules with user-friendly and intuitive GUI and a highly visualized interactive output. Includes a full-body computational human phantom with over 120 triangular surface meshes extracted from the Visible Human Project® Female dataset of the National library of Medicine and fully compatible with MATLAB® and major commercial FEM/BEM electromagnetic software simulators. This book covers the basic concepts of computational low-frequency electromagnetics in an application-based format and hones the knowledge of these concepts with hands-on MATLAB® modules. The book is divided into five parts. Part 1 discusses low-frequency electromagnetics, basic theory of triangular surface mesh generation, and computational human phantoms. Part 2 covers electrostatics of conductors and dielectrics, and direct current flow. Linear magnetostatics is analyzed in Part 3. Part 4 examines theory and applications of eddy currents. Finally, Part 5 evaluates nonlinear electrostatics. Application examples included in this book cover all major subjects of low-frequency electromagnetic theory. In addition, this book includes complete or summarized analytical solutions to a large number of quasi-static electromagnetic problems. Each Chapter concludes with a summary of the corresponding MATLAB® modules. Combines fundamental electromagnetic theory and application-oriented computation algorithms in the form of stand alone MATLAB® modules Makes use of the three-dimensional Method of Moments (MoM) for static and quasistatic electromagnetic problems Contains a detailed full-body computational human phantom from the Visible Human Project® Female, embedded implant models, and a collection of homogeneous human shells Low-Frequency Electromagnetic Modeling for Electrical and Biological Systems Using MATLAB® is a resource for electrical and biomedical engineering students and practicing researchers, engineers, and medical doctors working on low-frequency modeling and bioelectromagnetic applications.
