Download or read book Electromagnetic Compatibility in Power Systems written by Francesco Lattarulo and published by Elsevier. This book was released on 2011-07-28 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of natural or artificially produced physical phenomena are exploited for practical applications, even though several of them give rise to unpleasant consequences. These ultimately manifest themselves under form of malfunction or definitive failure of components and systems, or environmental hazard. So far, manifold categories of inadvertent or deliberate sources have been discovered to simultaneously produce useful effects in some ways but adverse ones in others. In particular, responsible for the growing interest in the last decades for Electromagnetic Compatibility (EMC) has been the progressive miniaturisation and sensitivity of electronic components and circuits, often operating in close proximity to relatively powerful sources of electromagnetic interference. Potential authors of books on the subject-matter are fully aware of the fact that planning production of manageable handbooks capable to treat all the EMC case studies of practical and long-lasting interest could result in a questionable and difficult undertaking. Therefore, in addition to textbooks providing a thorough background on basic aspects, thus being well-tailored for students and those which want to get in contact with this discipline, the most can be made to jointly sustain a helpful and practicable publishing activity is to supply specialised monographs or miscellanies of selected topics. Such resources are preferentially addressed to post-graduate students, researchers and designers, often employed in the forefront of research or engaged for remodelling design paradigms. Hence, the prerequisite for such a class of publications should consist in arousing critical sense and promoting new ideas. This is the object of Electromagnetic Compatibility in Power Systems, which tries to rather discuss special subjects, or throw out suggestions for reformulating conventional approaches, than to appear as a reference text. A common motivation encouraged the contributors to bringing together a number of accounts of the research that they have undertaken over the late years: willing to fill the important need of covering EMC topics rather proper to transmission and distribution of electric power than, more usually, to Electronics and Telecommunication Systems. - EMC topics for Power Systems, at last! - Investigating EMC features of distributed and/or complex systems - A broad body of knowledge for specific applications - A stimulating support for those which are engaged in the forefront of research and design - An example of how breaking ideas should be encouraged and proudly applied - A fruitful critique to overcomplicated and unpractical models - A comprehensive resource to estimate the important role of EMC at lower frequencies

Download or read book Electromagnetic Compatibility in Power Electronics written by François Costa and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists largely attribute the recent deterioration of the electromagnetic environment to power electronics. This realization has spurred the study of methodical approaches to electromagnetic compatibility designs as explored in this text. The book addresses major challenges, such as handling numerous parameters vital to predicting electro magnetic effects and achieving compliance with line-harmonics norms, while proposing potential solutions.

Download or read book Electromagnetic Compatibility of Electric Vehicle written by Li Zhai and published by Springer Nature. This book was released on 2021-01-30 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the electromagnetic compatibility(EMC) of electric vehicle(EV), including EMC of the whole vehicle, electromagnetic interference(EMI) prediction and suppression of motor drive system, EMI prediction and suppression of DC-DC converter, electromagnetic field safety and EMC of wireless charging system, signal integrity and EMC of the vehicle controller unit(VCU), EMC of battery management system(BMS), electromagnetic radiated emission diagnosis and suppression of the whole vehicle, etc. The analysis method, modeling and simulation method, test method and rectification method of EMC are demonstrated. The simulation and experimental results are presented as tables and figures. This book is useful as reference for graduate students, senior undergraduates and engineering technicians of vehicle engineering related majors. For EMI prediction, suppression and EMC optimization design for EVs, this book provides reference for engineers to solve EMC problems. This book is intended for senior undergraduates, postgraduates, lecturers and laboratory researchers engaged in electric vehicle and electromagnetic compatibility research.

Download or read book Electromagnetic Compatibility in Power Electronics written by László Tihanyi and published by Newnes. This book was released on 1995 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions. The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.

Download or read book Electromagnetic Compatibility Engineering written by Henry W. Ott and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

Download or read book Electromagnetic Compatibility for Device Design and System Integration written by Karl-Heinz Gonschorek and published by Springer Science & Business Media. This book was released on 2009-09-18 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Electromagnetic Compatibility has become an increasingly essential factor for placing a product on the global, world wide market. Fulfilling emission limits and immunity requirements as well as handling apparently complex cases of incompatibility demands a deeper understanding of the physical interrelations and of Maxwell's theory. Based on the authors’ experiences, the textbook provides some help in solving such interferential cases. It contains many illustrative examples and more than 80 exercises with solutions.

Download or read book Electromagnetic Interference and Compatibility written by Paolo Stefano Crovetti and published by MDPI. This book was released on 2021-08-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.

Download or read book Electromagnetic Time Reversal written by Farhad Rachidi and published by John Wiley & Sons. This book was released on 2017-04-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to familiarize the reader with the concept of electromagnetic time reversal, and introduce up-to-date applications of the concept found in the areas of electromagnetic compatibility and power systems. It is original in its approach to describing propagation and transient issues in power networks and power line communication, and is the result of the three main editors' pioneering research in the area.

Download or read book Noise Reduction Techniques in Electronic Systems written by Henry W. Ott and published by Wiley-Interscience. This book was released on 1988-03-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.

Download or read book Electromagnetic Compatibility in Railways written by Ade Ogunsola and published by Springer Science & Business Media. This book was released on 2012-08-14 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A railway is a complex distributed engineering system: the construction of a new railway or the modernisation of a existing one requires a deep understanding of the constitutive components and their interaction, inside the system itself and towards the outside world. The former covers the various subsystems (featuring a complex mix of high power sources, sensitive safety critical systems, intentional transmitters, etc.) and their interaction, including the specific functions and their relevance to safety. The latter represents all the additional possible external victims and sources of electromagnetic interaction. EMC thus starts from a comprehension of the emissions and immunity characteristics and the interactions between sources and victims, with a strong relationship to electromagnetics and to system modeling. On the other hand, the said functions are achieved and preserved and their relevance for safety is adequately handled, if the related requirements are well posed and managed throughout the process from the beginning. The link is represented by standards and their correct application, as a support to analysis, testing and demonstration.

Download or read book Electromagnetic Compatibility EMC Design and Test Case Analysis written by Junqi Zheng and published by John Wiley & Sons. This book was released on 2019-06-18 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to techniques for the design of electronic products from the Electromagnetic compatibility (EMC) perspective Introduces techniques for the design of electronic products from the EMC aspects Covers normalized EMC requirements and design principles to assure product compatibility Describes the main topics for the control of electromagnetic interferences and recommends design improvements to meet international standards requirements (FCC, EU EMC directive, Radio acts, etc.) Well organized in a logical sequence which starts from basic knowledge and continues through the various aspects required for compliance with EMC requirements Includes practical examples and case studies to illustrate design features and troubleshooting Author is the founder of the EMC design risk evaluation approach and this book presents many years’ experience in teaching and researching the topic

Download or read book Electromagnetic Compatibility written by David Weston and published by CRC Press. This book was released on 2017-12-19 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: This totally revised and expanded reference/text provides comprehensive, single-source coverage of the design, problem solving, and specifications of electromagnetic compatibility (EMC) into electrical equipment/systems-including new information on basic theories, applications, evaluations, prediction techniques, and practical diagnostic options for preventing EMI through cost-effective solutions. Offers the most recent guidelines, safety limits, and standards for human exposure to electromagnetic fields! Containing updated data on EMI diagnostic verification measurements, as well as over 900 drawings, photographs, tables, and equations-500 more than the previous edition-Electromagnetic Compatibility: Principles and Applications, Second Edition:

Download or read book Principles and Techniques of Electromagnetic Compatibility written by Christos Christopoulos and published by CRC Press. This book was released on 1995-02-22 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike other publications, this new book offers a different approach to the study of electromagnetic compatibility (EMC). It emphasizes the understanding of relevant electromagnetic interactions in increasingly complex systems. Mathematical tools are introduced when pursuing the physical picture unaided becomes counterproductive. In order to handle complexity, numerical tools are developed and the basis and capabilities of these tools are presented. Part I of the book covers underlying concepts and techniques. This includes discussions on electromagnetic fields, electrical circuit components, and electrical signals and circuits. The second part deals with general EMC concepts and techniques and will be useful for predicting the EMC behavior of systems. More practical techniques used to control electromagnetic interference and the design of EMC into products are presented in Part III. The main EMC standards and test techniques are described in the final part of the book. Chapters are designed to allow readers to study the entire book at a pace which reflects their own background and interests. The book appeals to both EMC applications-oriented and analysis-oriented readers. This text provides useful source material for a serious study of EMC, including references to more advanced work.

Download or read book Electromagnetic Compatibility written by David A. Weston and published by CRC Press. This book was released on 2016-11-03 with total page 1311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Revised, updated, and expanded, Electromagnetic Compatibility: Methods, Analysis, Circuits, and Measurement, Third Edition provides comprehensive practical coverage of the design, problem solving, and testing of electromagnetic compatibility (EMC) in electrical and electronic equipment and systems. This new edition provides novel information on theory, applications, evaluations, electromagnetic computational programs, and prediction techniques available. With sixty-nine schematics providing examples for circuit level electromagnetic interference (EMI) hardening and cost effective EMI problem solving, this book also includes 1130 illustrations and tables. Including extensive data on components and their correct implementation, the myths, misapplication, misconceptions, and fallacies that are common when discussing EMC/EMI will also be addressed and corrected.

Download or read book Spacecraft Electromagnetic Compatibility Technologies written by Hua Zhang and published by Springer Nature. This book was released on 2020-07-27 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores key techniques and methods in electromagnetic compatibility management, analysis, design, improvement and test verification for spacecraft. The first part introduces the general EMC technology of spacecraft, the electromagnetic interference control method and management of electromagnetic compatibility. The second part discusses the EMC prediction analysis technique and its application in spacecraft, while the third presents the EMC design of spacecraft modules and typical equipment. The final two parts address spacecraft magnetic design testing technologies and spacecraft testing technologies. The book also covers the program control test process, the special power control unit (PCU), electric propulsion, PIM test and multipaction testing for spacecraft, making it a valuable resource for researchers and engineers alike.

Download or read book Automotive Electromagnetic Compatibility EMC written by Terence Rybak and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone who has operated, serviced, or designed an automobile or truck in the last few years has most certainly noticed that the age of electronics in our vehicles is here! Electronic components and systems are used for everything from the traditional entertainment system to the latest in “drive by wire”, to two-way communication and navigation. The interesting fact is that the automotive industry has been based upon mechanical and materials engineering for much of its history without many of the techniques of electrical and electronic engineering. The emissions controls requirements of the 1970’s are generally recognized as the time when electronics started to make their way into the previous mechanically based systems and functions. While this revolution was going on, the electronics industry developed issues and concepts that were addressed to allow interoperation of the systems in the presence of each other and with the external environment. This included the study of electromagnetic compatibility, as systems and components started to have influence upon each other just due to their operation. EMC developed over the years, and has become a specialized area of engineering applicable to any area of systems that included electronics. Many well-understood aspects of EMC have been developed, just as many aspects of automotive systems have been developed. We are now at a point where the issues of EMC are becoming more and more integrated into the automotive industry.

Download or read book Handbook of Aerospace Electromagnetic Compatibility written by Dr. Reinaldo J. Perez and published by John Wiley & Sons. This book was released on 2018-11-30 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive resource that explores electromagnetic compatibility (EMC) for aerospace systems Handbook of Aerospace Electromagnetic Compatibility is a groundbreaking book on EMC for aerospace systems that addresses both aircraft and space vehicles. With contributions from an international panel of aerospace EMC experts, this important text deals with the testing of spacecraft components and subsystems, analysis of crosstalk and field coupling, aircraft communication systems, and much more. The text also includes information on lightning effects and testing, as well as guidance on design principles and techniques for lightning protection. The book offers an introduction to E3 models and techniques in aerospace systems and explores EMP effects on and technology for aerospace systems. Filled with the most up-to-date information, illustrative examples, descriptive figures, and helpful scenarios, Handbook of Aerospace Electromagnetic Compatibility is designed to be a practical information source. This vital guide to electromagnetic compatibility: • Provides information on a range of topics including grounding, coupling, test procedures, standards, and requirements • Offers discussions on standards for aerospace applications • Addresses aerospace EMC through the use of testing and theoretical approaches Written for EMC engineers and practitioners, Handbook of Aerospace Electromagnetic Compatibility is a critical text for understanding EMC for aerospace systems.