Download or read book Electrohydraulic Fracturing of Rocks written by Christian La Borderie and published by John Wiley & Sons. This book was released on 2016-02-15 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a new fracturing technique that should be considered as a potential alternative, or a companion technique, to hydraulic fracturing of tight gas reservoirs and low permeability rock masses. As opposed to hydraulic fracturing which generates a few numbers of large cracks, electro-hydraulic fracturing induces diffuse micro-cracking and fragmentation of rocks. Laboratory tests demonstrate that increases of permeability by two orders of magnitude can be reached, without major cracking in tested specimens. This book discusses the principles of this new technique, reports experiments which have been developed is order to prove the concept and finally describes the numerical model from which the potentialities of this technique in representative reservoir conditions can be assessed.
Download or read book The electrohydraulic effect on the fracture of rock written by Philip Edward Haskell and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Electrohydraulic Effect written by H. K. Kutter and published by . This book was released on 1969 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Porous Rock Fracture Mechanics written by Amir Shojaei and published by Woodhead Publishing. This book was released on 2017-05-05 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Porous Rock Failure Mechanics: Hydraulic Fracturing, Drilling and Structural Engineering focuses on the fracture mechanics of porous rocks and modern simulation techniques for progressive quasi-static and dynamic fractures. The topics covered in this volume include a wide range of academic and industrial applications, including petroleum, mining, and civil engineering. Chapters focus on advanced topics in the field of rock's fracture mechanics and address theoretical concepts, experimental characterization, numerical simulation techniques, and their applications as appropriate. Each chapter reflects the current state-of-the-art in terms of the modern use of fracture simulation in industrial and academic sectors. Some of the major contributions in this volume include, but are not limited to: anisotropic elasto-plastic deformation mechanisms in fluid saturated porous rocks, dynamics of fluids transport in fractured rocks and simulation techniques, fracture mechanics and simulation techniques in porous rocks, fluid-structure interaction in hydraulic driven fractures, advanced numerical techniques for simulation of progressive fracture, including multiscale modeling, and micromechanical approaches for porous rocks, and quasi-static versus dynamic fractures in porous rocks. This book will serve as an important resource for petroleum, geomechanics, drilling and structural engineers, R&D managers in industry and academia. - Includes a strong editorial team and quality experts as chapter authors - Presents topics identified for individual chapters are current, relevant, and interesting - Focuses on advanced topics, such as fluid coupled fractures, rock's continuum damage mechanics, and multiscale modeling - Provides a 'one-stop' advanced-level reference for a graduate course focusing on rock's mechanics
Download or read book Fracture Mechanics of Rock written by Barry Kean Atkinson and published by Elsevier. This book was released on 2015-05-11 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of crack problems through fracture mechanics has been applied to the study of materials such as glass, metals and ceramics because relatively simple fracture criteria describe the failure of these materials. The increased attention paid to experimental rock fracture mechanics has led to major contributions to the solving of geophysical problems.The text presents a concise treatment of the physics and mathematics of a representative selection of problems from areas such as earthquake mechanics and prediction, hydraulic fracturing, hot dry rock geothermal energy, fault mechanics, and dynamic fragmentation.
Download or read book Hard Rock Comminution Electrohydraulic Fracturing and Ball Mill Grinding written by Robert Carl Buto and published by . This book was released on 1995 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Fracturing and Rock Mechanics written by Yu Zhao and published by Springer Nature. This book was released on 2023-06-21 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is the first to consider the effect of non-uniform fluid pressure in hydraulic fractures. The book covers the key topics in the process of hydraulic fracture nucleation, growth, interaction and fracture network formation. Laboratory experiments and theoretical modeling are combined to elucidate the formation mechanism of complex fracture networks. This book is suitable for master’s/Ph.D. students, scientists and engineers majoring in rock mechanics and petroleum engineering who need to use a more reliable model to predict fracture behavior.
Download or read book Thermo Hydro Mechanical Coupling in Fractured Rock written by Hans-Joachim Kümpel and published by Birkhäuser. This book was released on 2012-12-06 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: (4). The next three papers extend these views by taking a closer look on parameters that govern hydraulic diffusivity in sandstones and other types of rocks. Specific targets addressed are the influence of differential stress on permeability (5), imaging of the fracture geometry (6), and pressure induced variations in the pore geometry (7). Contributions no. 8 to 10 cover investigations of permeability-porosity relationships during rock evolution (8), of the formation, propagation, and roughness of fractures in a plexi-glass block (9), and pressure oscillation effects of two-phase flow under controlled conditions (10). The subsequent four articles focus on diverse modeling approaches. Issues considered are how the geometry and the mechanical behavior of fractures can be characterized by mathematical expressions (11), how the evolution of permeability in a microcracking rock can be expressed by an analytical model (12), deviations from the cubic law for a fracture of varying aperture (13), and the numerical simulation of scale effects in flow through fractures (14). Three further papers refer to in situ observations, being related to topics as the assessment of in situ permeability from the spatio temporal distribution of an aftershock sequence (15), to the scale dependence of hydraulic pathways in crystalline rock (16), and to the significance of pore pressure - stress coupling in deep tunnels and galleries (17).
Download or read book Tensile Fracturing in Rocks written by Dov Bahat and published by Springer Science & Business Media. This book was released on 2005-08-31 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘Tensile Fracturing in Rocks’ presents field observations on fracturing of sedim- tary rocks and granite outcrops from various provinces in three continents. It also combines results of recent experiments conducted at different laboratories around the world with current theories on fracturing. In treating faults, this book limits itself to faults that are associated with joint sets produced by definable causes and occasi- ally to cases where interaction between the two types of fracture – faults and joints – is not clear. The book’s subject matter is divided over six chapters, which are briefly described below. Chapter 1 summarizes current key concepts in fracture physics. It starts with a pr- entation of the elastic theory of fracture, and concentrates on the results of linear el- tic fracture mechanics. The chapter touches also upon other fracture properties, e.g., crack nucleation, dynamic fracturing and slow fracturing processes. Nucleation is - dressed by statistical mechanics methods incorporating modern approaches of th- mal and fiber bundle processes. The analyses of dynamic fracturing and slow fract- ing focus on the differences, as compared to the linear elastic approach. The cont- versy in interpreting experimental dynamic results is highlighted, as are the surface morphology patterns that emerge in fracturing and the non-Griffith crack extension criterion in very slow fracturing processes.
Download or read book Rock Fractures in Geological Processes written by Agust Gudmundsson and published by Cambridge University Press. This book was released on 2011-04-28 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock fractures control many of Earth's dynamic processes, including plate-boundary development, tectonic earthquakes, volcanic eruptions, and fluid transport in the crust. An understanding of rock fractures is also essential for effective exploitation of natural resources such as ground water, geothermal water, and petroleum. This book combines results from fracture mechanics, materials science, rock mechanics, structural geology, hydrogeology, and fluid mechanics to explore and explain fracture processes and fluid transport in the crust. Basic concepts are developed from first principles and illustrated with worked examples linking models of geological processes to real field observations and measurements. Many additional examples and exercises are provided online, allowing readers to practise formulating and quantitative testing of models. Rock Fractures in Geological Processes is designed for courses at the advanced undergraduate and graduate level but also forms a vital resource for researchers and industry professionals concerned with fractures and fluid transport in the Earth's crust.
Download or read book Hydraulic Fracturing in Earth rock Fill Dams written by Jun-Jie Wang and published by John Wiley & Sons. This book was released on 2014-08-11 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a systematic and comprehensive study of hydraulic fracturing, original in its concentration of core soil problems There have been a number of well-studied cases in which dams have failed or been damaged by concentrated leaks for no apparent cause. In some of these experiences, investigators concluded that differential settlement cracks were the probable causes, even though no cracks were seen on the surface. In these examples, it was not determined whether the crack was open before the reservoir filled or whether it might have opened afterward. In several unsolved problems on the safety of the earth-rock fill dam, the problem of hydraulic fracture in the soil core of the earth-rock fill dam is one that is widely paid attention by designers and researchers. Hydraulic fracturing is generally considered as a key cause which may induce the leakage of the dam during first filling. In this extensive book, a new numerical simulate method is suggested. The method is based on the conventional two-dimensional finite element technique, and the theoretical formulations to calculate energy release rate using virtual crack extension method. The influence factors on convergence of calculated J integral are investigated. The accuracy of the calculated J integral is verified by analysing the three typical problems in Fracture Mechanics, in which propagation of crack may follow mode I, mode II and mixed mode I-II respectively. Using the new numerical method, the factors affecting the occurrence of hydraulic fracturing in the earth-rock fill dam are investigated. The investigating results indicate that increasing any of the Young’s modulus, the Poisson’s ratio and the density of the core soil is helpful to reduce the likelihood of the occurrence of hydraulic fracturing. The likelihood of the occurrence of hydraulic fracturing increases with increasing the water level or the crack depth. The lower part of the dam core is the zone in which the phenomenon of hydraulic fracturing may be induced easily. As an example to analyse the ability of earth-rock fill dam to resist hydraulic fracturing, the Nuozhadu Dam located in Western China is analysed. Presents a systematic and comprehensive study of hydraulic fracturing, original in its concentration of core soil problems Focuses on the problem of hydraulic fracturing in earth-rock fill dams from three aspects; conditions and mechanisms of hydraulic fracturing, criterion of hydraulic fracturing, and numerical method on hydraulic fracturing Examines advanced laboratory soil testing, application of numerical methods and field testing/monitoring, all needed for a better understanding of hydraulic fracturing in earth/rock fill dams Provides an essential reference in an area of scarce research in this field, and the need in high earth dam construction in developing countries is pressing Ideal for researchers in Hydraulic and Geotechnical Engineering Fields; Students on Masters or PhD courses; as well as Designers and Constructors in Hydraulic and Geotechnical Engineering Fields.
Download or read book Modeling of Hydraulic Fracturing in Rocks written by and published by . This book was released on 2015 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Folding and Fracturing of Rocks written by John G. Ramsay and published by McGraw-Hill Companies. This book was released on 1967 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Folding and Fracturing of Rocks was first published in 1967. It was one of the first major publications aimed at developing for geologists the basic theory of stress and strain in mathematical terms and explaining how this theory could be used to solve practical problems in structural geology and tectonics. Although out-of-print for many years, it is still one of the most frequently cited and quoted texts in modern research publications in structural geology.
Download or read book Rock Mechanics written by Leopold Müller and published by Springer Science & Business Media. This book was released on 1982-02-01 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much of the research on fracture of rocks or rock-like materials conducted over the past two decades may be considered as "academic studies" of the general phenomenon of fracture. Yet, the understanding of this phenomenon is fundamental if a material is used in any engineering design, whether the aim is to prevent failure of the structure or to promote it. Fracture theories existing are generally empirical and derived from experimental results of laboratory test with simple boundary conditions. Because of the basic weakness of rock intension and because in general the environmental stresses in rock mechanics are compressive most of these theories consider fracture under compressive stress conditions. The Coulomb-Navier-, the Mohr-, the Griffith and the McClintock and Walsh criteria are typical examples and will be considered in the following. In addition the tendency during the past was in making accurate experiments under conditions of homogeneous stresses. To obtain information about the fracture behaviour with unequal principal stresses systems have to be used which involve inhomogeneous stresses. This case is of particular interest, since in practical rock mechanics we may expect conditions of highly inhomogeneous stresses. However, a consideration of such situations involve additional assumptions like the applicability of the theory of elasticity for calculating the stress field, which may be open to question. A distinction has to be made between fracture initiation and fracture propagation, since a detailed observation of the total fracture process in rock was possible by means of "stiff" and "servo-controlled" loading systems.
Download or read book Flow and Contaminant Transport in Fractured Rock written by Jacob Bear and published by Academic Press. This book was released on 2012-12-02 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past two or three decades, fractured rock domains have received increasing attention not only in reservoir engineering and hydrology, but also in connection with geological isolation of radioactive waste. Locations in both the saturated and unsaturated zones have been under consideration because such repositories are sources of heat and potential sources of groundwater contamination. Thus, in addition to the transport of mass of fluid phases in single and multiphase flow, the issues of heat transport and mass transport of components have to be addressed.
Download or read book Hydraulic Fracturing in Anisotropic Rocks A Global Approach written by S. Bastide and published by . This book was released on 1987 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fractured Rock Hydraulics written by Fernando Olavo Franciss and published by CRC Press. This book was released on 2014-10-14 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uniquely devoted to hard and fractured rock hydraulics, this advanced-level introduction provides tools to solve practical engineering problems. Chapter I covers the fundamentals of fractured rock hydraulics under a tensor approach. Chapter II presents some key concepts about approximate solutions. Chapter III discuss a few data analysis techniques applied to groundwater modeling. Chapter IV presents unique 3D finite difference algorithms to simulate practical problems concerning the hydraulic behavior of saturated, heterogeneous and randomly fractured rock masses without restriction to the geometry and properties of their discontinuities. Supported by examples, cases, illustrations and references, this book is intended for professionals and researchers in hydrogeology, engineering geology, petroleum reservoir, rock and hydraulic engineering. Its explanatory nature allows its use as a textbook for advanced students.
