Download or read book Electrodeposition of Cu Ni Composite Coatings written by Casey R. Thurber and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrodeposition of Cu-Ni incorporated with nano- to microparticles to produce metal matrix composites has been reviewed in this chapter. The inclusion of particles into the metal matrix produced enhanced properties in the areas of electronics, mechanics, electrochemistry, and corrosion. In electronics, an increase in the magnetic properties and durability for microactuators was observed. Measurements of the mechanical properties showed an increase in hardness, wear resistance, shear adhesion, and tensile strength for the material. The corrosion resistance of the metal matrix coatings was improved over that of pure Cu-Ni. As the accessibility of nanoparticles continues to increase, the interest in reduced cost and low-temperature electrodeposited metal matrix composites continues to rise. However, only a small number of articles have investigated Cu-Ni composite coatings; these composite coatings need further examination due to their advantageous properties.
Download or read book Electrodeposition of Composite Materials written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2016-03-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.
Download or read book Nanocomposite Coatings written by Mahmood Aliofkhazraei and published by Nova Science Pub Incorporated. This book was released on 2011-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research activities around fabrication of these kinds of two dimensional nanostructured coatings with examples of enhanced mechanical properties, corrosion resistance, and physical characteristics. As one of the useful and simple methods for fabrication of nanocomposite coatings, electrochemical deposition (electroplating) techniques are a strong focus in this book. The relation among nanotechnology and these kinds of nanostructures that come from "size effect" and "distribution effect" is discussed through different chapters of this book. Nanocomposite coatings have numerous advantages.
Download or read book Advances in Nanocomposites written by Boreddy Reddy and published by IntechOpen. This book was released on 2011-04-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanocomposites - Synthesis, Characterization and Industrial Applications was conceived as a comprehensive reference volume on various aspects of functional nanocomposites for engineering technologies. The term functional nanocomposites signifies a wide area of polymer/material science and engineering, involving the design, synthesis and study of nanocomposites of increasing structural sophistication and complexity useful for a wide range of chemical, physicochemical and biological/biomedical processes. "Emerging technologies" are also broadly understood to include new technological developments, beginning at the forefront of conventional industrial practices and extending into anticipated and speculative industries of the future. The scope of the present book on nanocomposites and applications extends far beyond emerging technologies. This book presents 40 chapters organized in four parts systematically providing a wealth of new ideas in design, synthesis and study of sophisticated nanocomposite structures.
Download or read book Electrodeposition of Nickel Composite Coatings written by Tushar Borkar and published by . This book was released on 2010 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposition of Alloys written by Abner Brenner and published by Elsevier. This book was released on 2013-10-22 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrodeposition of Alloys: Principles and Practice, Volume I covers the general and theoretical aspects of the electrodeposition of alloy containing silver and/or copper. This book is organized into three parts encompassing 21 chapters. The first part considers first the history of electrodeposition, the applications of electrodeposited alloys, and the practical considerations involved in electrodeposition. This part also deals with the effect of operating variables on composition of electrodeposited alloys, and the physico-chemical properties of the alloy. The second part focuses on the theoretical aspects of alloy electrodeposition. This part includes discussions on the role of cathode diffusion layer, the effects of complexing agents, and the concept of alloy plating. The third part discusses the practical aspects of the electrodeposition of alloys, focusing primarily on the electrodeposition of alloys from aqueous solutions. This part examines first brass and bronze plating, followed by the electrodeposition of copper-tin, silver, and iron containing alloys. This book is directed toward electrochemists and researchers.
Download or read book Modern Electroplating written by Mordechay Schlesinger and published by John Wiley & Sons. This book was released on 2011-02-14 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive resource for electroplating, now completely up to date With advances in information-age technologies, the field of electroplating has seen dramatic growth in the decade since the previous edition of Modern Electroplating was published. This expanded new edition addresses these developments, providing a comprehensive, one-stop reference to the latest methods and applications of electroplating of metals, alloys, semiconductors, and conductive polymers. With special emphasis on electroplating and electrochemical plating in nanotechnologies, data storage, and medical applications, the Fifth Edition boasts vast amounts of new and revised material, unmatched in breadth and depth by any other book on the subject. It includes: Easily accessible, self-contained contributions by over thirty experts Five completely new chapters and hundreds of additional pages A cutting-edge look at applications in nanoelectronics Coverage of the formation of nanoclusters and quantum dots using scanning tunneling microscopy (STM) An important discussion of the physical properties of metal thin films Chapters devoted to methods, tools, control, and environmental issues And much more A must-have for anyone in electroplating, including technicians, platers, plating researchers, and metal finishers, Modern Electroplating, Fifth Edition is also an excellent reference for electrical engineers and researchers in the automotive, data storage, and medical industries.
Download or read book Theory and Practice of Metal Electrodeposition written by Yuliy D. Gamburg and published by Springer Science & Business Media. This book was released on 2011-06-11 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors provide new insights into the theoretical and applied aspects of metal electrodeposition. The theory largely focuses on the electrochemistry of metals. Details on the practice discuss the selection and use of metal coatings, the technology of deposition of metals and alloys, including individual peculiarities, properties and structure of coatings, control and investigations. This book aims to acquaint advanced students and researchers with recent advances in electrodeposition while also being an excellent reference for the practical electrodeposition of metals and alloys.
Download or read book Alloy Materials and Their Allied Applications written by Inamuddin and published by John Wiley & Sons. This book was released on 2020-06-16 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloy Materials and Their Allied Applications provides an in-depth overview of alloy materials and applications. The 11 chapters focus on the fabrication methods and design of corrosion-resistant, magnetic, biodegradable, and shape memory alloys. The industrial applications in the allied areas, such as biomedical, dental implants, abrasive finishing, surface treatments, photocatalysis, water treatment, and batteries, are discussed in detail. This book will help readers solve fundamental and applied problems faced in the field of allied alloys applications.
Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.
Download or read book Handbook on Electroplating with Manufacture of Electrochemicals Electroplating of Aluminium Cadmium Chromium Cobalt Copper Gold Iron Lead Nickel Bright Nickel Silver Alloy Platinum Palladium Rhodium Bright Zinc Tin Plastics Barrel Electroless Plating Metal Treatment with Formulation Machinery Equipment Details and Factory Layout written by Dr. H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2024-01-01 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroplating and Electrochemicals, industries shimmering with growth and profitability potential, are truly riveting. Electroplating, an intricate process, involves the electrodeposition of a svelte metallic stratum onto diverse substrates utilizing electric currents. This technique entails submerging the intended object, the substrate, into an electrolytic bath brimming with metal ions and, through the application of an electric current, achieves a homogeneous metallic veneer. Conversely, Electrochemicals are birthed from electrochemical reactions. These intricate reactions are characterized by the transference of electrons among distinct compounds within an electrolytic milieu. Through the deliberate orchestration of electron flow, a plethora of chemical reactions are catalyzed, culminating in the synthesis of targeted chemicals. This methodology finds its application across a spectrum of industries, encompassing pharmaceuticals, agriculture, and energy storage sectors. The global electroplating market is expected to grow at a CAGR of 5.5%. The growth in the market can be attributed to the increasing demand for electroplated products from various end-use industries, such as automotive, electrical & electronics, aerospace & defense, Jewellery and machinery parts & components. In addition, the growing awareness about corrosion protection and decorative finishes is also propelling the growth of this market. This book contains in-depth information about Electrochemical Processing, Metal Surface Treatment, Electroless Plating, Electroplating, Electroplating of Aluminium, Cadmium, Chromium, Cobalt, Copper, Gold, Iron, Lead, Nickel, Bright Nickel, Silver, Alloy, Platinum, Palladium, Rhodium, Bright Zinc, Tin, Plastics, Barrel, Zinc Electroplating Brightener, Metal Treatments, Electrodeposition of Precious Metals, Electropolishing of Stainless Steel, Case Hardening, Electroless Coating of (Gold, Silver), Buffing and Industrial Metal Polishing Compounds, Aluminium, Gold and Its Compounds, Complex Salts of (Copper, Silver and Gold), Hydrides of Silicon, Chemical and Electrochemical Conversion Treatments, Electrostatic Sealing. This book is an invaluable resource that comprehensively addresses all the essential topics in Electroplating and Electrochemicals. It is poised to become a standard reference for professionals and entrepreneurs interested in this field, offering a comprehensive understanding of Electroplating. Additionally, it will prove highly beneficial to consultants, new entrepreneurs, technocrats, research scholars, libraries, and existing businesses. The book offers a detailed roadmap that guides readers from the initial concept to the machinery acquisition phase.
Download or read book Nanophotocatalysis and Environmental Applications written by Inamuddin and published by Springer. This book was released on 2019-03-14 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves the environmentalists to track the development of photocatalytic materials and technology in the present context and to explore future trends. Photocatalysis is the most influential greener technology being researched, developed and adopted for the treatment of wastewater. The technological advancements in the area of smart hybrid photocatalytic materials have gained momentum in the present era. The rational designing of photocatalytic materials with a multi-pronged approach opens a new chapter for environmental detoxification. Other important aspects relate to the transfer of this nanostructured photocatalytic technology to real backdrops. Harnessing natural solar energy for energy and environmental roles is another crucial criterion in designing photocatalysts.
Download or read book Fundamental Aspects of Electrometallurgy written by Konstantin Popov and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title begins with a thorough background to the subject. Next, the authors discuss the significance of electrometallurgy within the broader spectrum of science and technology. They then expand the previously laid theoretical base and explain mechanisms of metal deposition and applications for all existing related technologies.; The book should be of interest to undergraduate and graduate students involved with electrochemistry of metals, materials science, plating technologies, electronics materials and other fields. Scientists and engineers working in a variety of industries in addition to electrometallurgical process plants will find it an invaluable reference as it provides a thorough background of electrometallurgy, then explores the more advanced mechanisms of metal deposition in a logical manner.
Download or read book Metal Electrodeposition written by Magdalena Nuñez and published by Nova Publishers. This book was released on 2005 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemistry is the branch of chemistry that deals with the chemical action of electricity and the production of electricity by chemical reactions. In a world short of energy sources yet long on energy use, electrochemistry is a critical component of the mix necessary to keep the world economies growing. Electrochemistry is involved with such important applications as batteries, fuel cells, corrosion studies, hydrogen energy conversion, and bioelectricity. Research on electrolytes, cells, and electrodes is within the scope of this old but extremely dynamic field. This book details advances in metal electrodeposition.
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
Download or read book Electrodeposition of Nickel based Composite Coatings for Tribological Applications written by Yang He and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.
