Download or read book Electrocorrosion and Protection of Metals written by Joseph Riskin and published by Elsevier. This book was released on 2008-11-07 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrocorrosion, the corrosion of metallic constructions by external currents, is the most significant factor in conductive aggressive environments. Corrosion of underground and underwater metal constructions by stray currents has been comprehensively studied in the past decades and is considered here only in the form of a review. The primary attention is on corrosion, by external anodic (mainly) and cathodic currents, of metal constructions in the highly aggressive environments typical for electrochemical plants, where penetration of the external currents (leakage currents) from the electrolytic baths into metal constructions is unavoidable. A new approach to the problem of electrocorrosion protection of passive structural metals is considered in this book, keeping the metals attacked by external currents in the boundaries of their passive field. The systems, developed in accordance with this approach, are based on the modification of existing and elaboration of new methods of electrocorrosion protection. These systems take into account corrosion and electrochemical characteristics of the aggressive media (redox potential, conductivity etc.) and of the passive metal (corrosion and activation potentials, current density in a passive state, etc) as well as the sizes and distribution character of the external currents. The book covers analysis of leakage current distributions in electrochemical plants, their influence, methods to estimate corrosion stability of metallic structures subject to external currents and presents many concrete examples of the successful introduction of corrosion protection systems in operating plants. A new approach to protection from electrocorrosion, taking into account the passive state of the metal in aggressive media Newly developed and modifications of well known methods of electrocorrosion protection are presented Systematized data on electrocorrosion and protection of metals, especially in electrochemical plants, allow corrosion engineers, researchers and personnel maintaining the equipment of electrochemical plants to analyze the corrosion state of metallic equipment and prevent electrocorrosion
Download or read book Electrocorrosion and Protection of Metals written by Joseph Riskin and published by Elsevier. This book was released on 2019-05-15 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrocorrosion and Protection of Metals, Second Edition, compiles theoretical and practical information, outlines the specific problem, and presents the available solutions related to corrosion by external currents. Basic data on the behavior of different metals under the attack of anodic, cathodic, direct and alternating currents is considered, as are the problems of electrocorrosion—from the identification of corrosion damage and detection of the external current sources, to the selection of optimal means and methods of mitigation, monitoring and protection of different metallic structures and structures of reinforced concrete. This book includes comprehensive information and provides necessary links to more detailed, original sources, thus enabling users to solve either general or particular problems of electrocorrosion and protection of metals. Provides a comprehensive listing of all possible sources of external currents which attack metallic equipment, piping and other metallic structures Outlines the sources of corrosion damage for fast and reliable analysis Provides technical examples and case studies related to electrocorrosion Presents new data and methods of electrocorrosion control and monitoring using computerized techniques and technologies Includes original methods—only considered in this publication—of metals protection against electrocorrosion
Download or read book Corrosion Protection of Metals by Intrinsically Conducting Polymers written by Pravin P. Deshpande and published by CRC Press. This book was released on 2016-01-13 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of conducting polymers for the anticorrosion protection of metals has attracted great interest during the last 30 years. The design and development of conducting polymers-based coating systems with commercial viability is expected to be advanced by applying nanotechnology and has received substantial attention recently. This book begins with corrosion fundamentals and ends with an emphasis on developments made in conducting polymer science and technology using nanotechnology. Additionally, it gives a detailed account of experimental methods of corrosion testing.
Download or read book Theory of Corrosion and Protection of Metals written by N. D. Tomashov and published by . This book was released on 1966 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Corrosion and Protection of Metals written by Gösta Wranglén and published by . This book was released on 1972 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Corrosion and Protection written by Yongchang Huang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-02-05 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces corrosion mechanisms and protection technologies for metallic and non-metallic materials. A focus lies on the protection of high-tech materials with applications in space and environments exposed to unclear radiation and biological hazards. The determination, measurement and control of different corrosion mechanisms are discussed in detail. Combining theories with case studies, it is an essential reference for material scientists and engineers.
Download or read book Fundamentals of Electrochemical Corrosion written by Ele Eugene Stansbury and published by ASM International. This book was released on 2000-01-01 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the essential aspects of the corrosion behavior of metals in aqueous environments, this book is designed with the flexibility needed for use in courses for upper-level undergraduate and graduate students, for concentrated courses in industry, for individual study, and as a reference book.
Download or read book Corrosion and Protection of Metals written by David M Bastidas and published by . This book was released on 2020-09-16 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and Scope-During the last few decades, an enormous effort has been made to understand corrosion phenomena and their mechanisms, and to elucidate the causes that dramatically influence the service lifetime of metal materials. The performance of metal materials in aggressive environments is critical for a sustainable society. The failure of the material in service impacts the economy, the environment, health, and society. In this regard, corrosion-based economic losses due to maintenance, repair, and the replacement of existing structures and infrastructure account for up to 4% of gross domestic product (GDP) in well developed countries. One of the biggest issues in corrosion engineering is estimating service lifetime. Corrosion prediction has become very difficult, as there is no direct correlation with service lifetime and experimental lab results, usually as a result of discrepancies between accelerated testing and real corrosion processes. It is of major interest to forecast the impact of corrosion-based losses on society and the global economy, since existing structures and infrastructure are becoming old, and crucial decisions now need to be made to replace them. On the other hand, environmental protocols seek to reduce greenhouse effects. Therefore, low emission policies, in force, establish regulations for the next generation of materials and technologies. Advanced technologies and emergent materials will enable us to get through the next century. Great advances are currently in progress for the development of corrosion-resistant metal materials for different sectors, such as energy, transport, construction, and health. This Special Issue on the corrosion and protection of metals is focused on current trends in corrosion science, engineering, and technology, ranging from fundamental to applied research, thus covering subjects related to corrosion mechanisms and modelling, protection and inhibition processes, and mitigation strategies.
Download or read book Handbook of Cathodic Corrosion Protection written by Walter von Baeckmann and published by Elsevier. This book was released on 1997-10-17 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all aspects of cathodic protection in terms of both practice and theory.
Download or read book An Introduction to Corrosion and Protection of Metals written by Gosta Wranglen and published by . This book was released on 1987 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Corrosion Prevention of Low Density Metals and Alloys written by B. A. Shaw and published by The Electrochemical Society. This book was released on 2001 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passivity and Protection of Metals Against Corrosion written by N. D. Tomashov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable progress has been made in the past 20 years toward understanding the basic mechanisms of corrosion, and the application of this knowledge to its control. From the very beginning, educational institutions and industrial research laboratories have contributed greatly toward determining and elucidating the fundamental principles of corrosion reactions. Some of the basic principles involved in cor rosion of metals can be credited to early investigators. Michael Faraday in 1830-1840 studied the relationship between the quantity of a metal dissolved and the electric current which was produced by this reaction. He also proposed that the passivation of iron was through the formation of a film and that the dissolution of a metal was electro chemical in nature. Sir Humphrey Davy in 1824 worked out the funda mentals of galvanic corrosion of ships' hulls and applied sacrificial zinc anodes to protect them from sea water corrosion. Richard Arlie in 1847 demonstrated that corrosion produced by oxygen at the surface of iron in a flowing stream generated a current. With the fundamental knowledge available to him from these early investigators, Willis Rodney Whitney developed and expressed, in its most useful form, one of the basic scientific principles which provides modern corrosion specialists with a fundamental basis of corrosion control. Dr. Whitney concluded that corrosion of iron is electrochemical, and that the rate is simply a function of the electromotive force and resistance of the circuit.
Download or read book An Introduction to Corrosion and Protection of Metals written by Gosta Wrangten and published by . This book was released on 1977 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Control written by S. Bradford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human beings undoubtedly became aware of corrosion just after they made their first metals. These people probably began to control corrosion very so on after that by trying to keep metal away from corrosive environments. "Bring your tools in out of the rain" and "Clean the blood off your sword right after battle" would have been early maxims. Now that the mechanisms of corrosion are better understood, more techniques have been developed to control it. My corrosion experience extends over 10 years in industry and research and over 20 years teaching corrosion courses to university engineering students and industrial consulting. During that time I have developed an approach to corrosion that has successfully trained over 1500 engineers. This book treats corrosion and high-temperature oxidation separately. Corrosion is divided into three groups: (1) chemical dissolution including uniform attack, (2) electrochemical corrosion from either metallurgicalor environmental cells, and (3) corrosive-mechanical interactions. It seems more logical to group corrosion according to mechanisms than to arbitrarily separate them into 8 or 20 different types of corrosion as if they were unrelated. University students and industry personnel alike generally are afraid of chemistry and consequently approach corrosion theory very hesitantly. In this text the electrochemical reactions responsible for corrosion are summed up in only five simple half-cell reactions. When these are combined on a polarization diagram, which is explained in detail, the electrochemical pro cesses become obvious.
Download or read book Anodic Protection written by Olen Riggs and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this book are to give technical information about anodic pro tection, explain how economic analyses are made to determine whether or not it should be used, and describe some of the applications and equipment. Lim itations of the technique will be pointed out. Technological changes that have resulted in higher temperatures, pres sures, and velocities increase corrosion rates and markedly influence materials selection and design decisions. Continuous cycle systems impose increased demands on system reliability. New processes require more sophisticated equipment made of costlier metals which are often in short supply and subject to the vagaries of international commerce. The impact of continuing inflation influences decisions related to capital expenditures and maintenance costs. Some problems caused by these considerations can be solved, or solutions simplified, by the use of anodic protection. Technical and scientific information is presented on applications to industrial equipment, economics, design and installation, operation and maintenance, electrochemical principles, laboratory tests and procedures. A historical summary, patent list, glossary of terms, and a subject index are included. It is important to acknowledge that much of the information has been from the original work of others, including the publications of many friends.
Download or read book An Introduction to Corrosion and Protection of Metals written by Gosta Wranglen and published by Springer. This book was released on 1985-05-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion may be defined as an unintentional attack on a material through reaction with a surrounding medium. The term can refer to a process or to the damage caused by such a process. According to this general definition, materials other than metals, such as ceramics, plastics or concrete, may also be subject to corrosion (or corrode). When no particular reference is made to the material, however, it is normally understood that a metal is being attacked. It is entirely in this limited sense that the term is used in this book. There are good reasons for treating the corrosion of metals separately, apart from deterioration or decay of other materials. Since metals have a high electric conductivity, their corrosion is usually of an electrochemical nature. The chemical deterioration of electrically non-conducting ma terials, such as plastics and ceramics, is governed by other physico-chemical principles. It is necessary to devote more attention to metallic corrosion nowadays than earlier, due to 1. An increased use of metals within all fields of technology. 2. The use for special applications, e.g. within the atomic energy field, of rare and expensive metals, whose preservation requires particular precautions. 3. A more corrosive environment due to the increasing pollution of air and water. 4. The use of metallic constructions of more slender dimensions which do not tolerate corrosive attacks to the same extent as did the heavy constructions used in the old days.
Download or read book Theory of Corrosion and Protection of Metals written by Nikon Danilovich Tomashov and published by . This book was released on 1966 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
