Download or read book Electrochemical SPM Study of 2D and 3D Phase Formation of Zn at the Ionic Liquid Au 111 Interface written by Jana Dogel and published by . This book was released on 2004 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrochemical SPM Study of 2D Phase and 3D Phase Formation of Zn at the Ionic Liquid written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zn electrodeposition in the under- (UPD) and overpotential (OPD) ranges by means of in-situ Scanning Tunneling Microscopy (STM) was examined, supported by in-situ cyclic voltammetry and chronoamperometrie. The underpotential deposition of Zn follows a layer-by-layer growth. For the first time the formation of three successive Zn monolayers has been observed in the UPD range. It has been shown, that the UPD of Zn is complicated due to surface alloying. The same growth mechanism extends from the UPD into OPD range until Al bulk deposition sets in. The UPD of Al at 100 mV vs. Zn/Zn(II) is marked by Moiré pattern formation. For the first time in this system the effective tunneling barrier f has been measured by STS. A first insight into the 2D phase formation of electrodeposited Zn at the electrolyte / electrode interface was obtained from STM images at various times and potentials. Before a coherent layer is formed wormlike structures are observed characteristic of spinodal decomposition. This implies a first order phase transition, which has been resolved here for the first time for 2D electrodeposition.
Download or read book Modern Aspects of Electrochemistry 42 written by Constantinos G. Vayenas and published by Springer Science & Business Media. This book was released on 2008-03-08 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume analyzes and summarizes recent developments in several key interfacial electrochemical systems in the areas of fuel cell electrocatatalysis, electrosynthesis and electrodeposition. The six Chapters are written by internationally recognized experts in these areas and address both fundamental and practical aspects of several existing or emerging key electrochemical technologies. The Chapter by R. Adzic, N. Marinkovic and M. Vukmirovic provides a lucid and authoritative treatment of the electrochemistry and electrocatalysis of Ruthenium, a key element for the devel- ment of efficient electrodes for polymer electrolyte (PEM) fuel cells. Starting from fundamental surface science studies and interfacial considerations, this up-to-date review by some of the pioneers in this field, provides a deep insight in the complex catalytic-electrocatalytic phenomena occurring at the interfaces of PEM fuel cell electrodes and a comprehensive treatment of recent developments in this extremely important field. Several recent breakthroughs in the design of solid oxide fuel cell (SOFC) anodes and cathodes are described in the Chapter of H. Uchida and M. Watanabe. The authors, who have pioneered several of these developments, provide a lucid presentation d- cribing how careful fundamental investigations of interfacial electrocatalytic anode and cathode phenomena lead to novel electrode compositions and microstructures and to significant practical advances of SOFC anode and cathode stability and enhanced electrocatalysis.
Download or read book Oxide Surfaces written by and published by Elsevier. This book was released on 2001-05-21 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a multi-author survey (in 15 chapters) of the current state of knowledge and recent developments in our understanding of oxide surfaces. The author list includes most of the acknowledged world experts in this field. The material covered includes fundamental theory and experimental studies of the geometrical, vibrational and electronic structure of such surfaces, but with a special emphasis on the chemical properties and associated reactivity. The main focus is on metal oxides but coverage extends from 'simple' rocksalt materials such as MgO through to complex transition metal oxides with different valencies.
Download or read book Quantities Units and Symbols in Physical Chemistry written by International Union of Pure and Applied Chemistry. Physical and Biophysical Chemistry Division and published by Royal Society of Chemistry. This book was released on 2007 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the IUPAC Physical Chemistry Division this definitive manual, now in its third edition, is designed to improve the exchange of scientific information among the readers in different disciplines and across different nations. This book has been systematically brought up to date and new sections added to reflect the increasing volume of scientific literature and terminology and expressions being used. The Third Edition reflects the experience of the contributors with the previous editions and the comments and feedback have been integrated into this essential resource. This edition has been compiled in machine-readable form and will be available online.
Download or read book Electrochemistry of Metal Chalcogenides written by Mirtat Bouroushian and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author provides a unified account of the electrochemical material science of metal chalcogenide (MCh) compounds and alloys with regard to their synthesis, processing and applications. Starting with the chemical fundamentals of the chalcogens and their major compounds, the initial part of the book includes a systematic description of the MCh solids on the basis of the Periodic Table in terms of their structures and key properties. This is followed by a general discussion on the electrochemistry of chalcogen species, and the principles underlying the electrochemical formation of inorganic compounds/alloys. The core of the book offers an insight into available experimental results and inferences regarding the electrochemical preparation and microstructural control of conventional and novel MCh structures. It also aims to survey their photoelectrochemistry, both from a material-oriented point of view and as connected to specific processes such as photocatalysis and solar energy conversion. Finally, the book illustrates the relevance of MCh materials to various applications of electrochemical interest such as (electro)catalysis in fuel cells, energy storage with intercalation electrodes, and ion sensing.
Download or read book Supported Ionic Liquids written by Rasmus Fehrmann and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book gives a timely overview about the fundamentals and applications of supported ionic liquids in modern organic synthesis. It introduces the concept and synthesis of SILP materials and presents important applications in the field of catalysis (e.g. hydroformylation, hydrogenation, coupling reactions, fine chemical synthesis) as well as energy technology and gas separation. Written by pioneers in the field, this book is an invaluable reference book for organic chemists in academia or industry.
Download or read book Na ion Batteries written by and published by John Wiley & Sons. This book was released on 2021-05-11 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers both the fundamental and applied aspects of advanced Na-ion batteries (NIB) which have proven to be a potential challenger to Li-ion batteries. Both the chemistry and design of positive and negative electrode materials are examined. In NIB, the electrolyte is also a crucial part of the batteries and the recent research, showing a possible alternative to classical electrolytes – with the development of ionic liquid-based electrolytes – is also explored. Cycling performance in NIB is also strongly associated with the quality of the electrode-electrolyte interface, where electrolyte degradation takes place; thus, Na-ion Batteries details the recent achievements in furthering knowledge of this interface. Finally, as the ultimate goal is commercialization of this new electrical storage technology, the last chapters are dedicated to the industrial point of view, given by two startup companies, who developed two different NIB chemistries for complementary applications and markets.
Download or read book Molten Salts written by Marcelle Gaune-Escard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several state-of-the-art applications of molten salts are presented, such as metal-molten salt systems, room temperature glass formation, and room temperature melts. Several recent examples of applications highlight the importance of molten salts in various industries (batteries, pyrochemical reprocessing of nuclear fuel, synthesis and catalysis). The basic concepts of the structure, dynamics, electrochemistry, interfacial and thermodynamic properties are detailed and relevant experimental methods described. Such fundamental concepts are essential for an in-depth understanding of the physicochemical properties of molten salts in general, including metal-molten salts, glass forming and low temperature melts. Experimental methods for investigating structural, dynamical, electrochemical thermodynamical and interfacial properties are detailed, as also are techniques for data collection and analysis. Scientists, engineers and technologists will find the volume a valuable reference source covering a wide spectrum of fundamental concepts and modern technologies.
Download or read book Nanopharmaceuticals Principles and Applications Vol 3 written by Vinod Kumar Yata and published by Springer Nature. This book was released on 2020-08-19 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third volume on this subject and focuses on the recent advances of nanopharmaceuticals in cancer, dental, dermal and drug delivery applications and presents their safety, toxicity and therapeutic efficacy. The book also includes the transport phenomenon of nanomaterials and important pathways for drug delivery applications. It goes on to explain the toxicity of nanoparticles to different physiological systems and methods used to assess this for different organ systems using examples of in vivo systems.
Download or read book Lithium ion Batteries written by and published by . This book was released on 2019 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is the first machine-generated scientific book in chemistry published by Springer Nature. Serving as an innovative prototype defining the current status of the technology, it also provides an overview about the latest trends of lithium-ion batteries research. This book explores future ways of informing researchers and professionals. State-of-the-art computer algorithms were applied to: select relevant sources from Springer Nature publications, arrange these in a topical order, and provide succinct summaries of these articles. The result is a cross-corpora auto-summarization of current texts, organized by means of a similarity-based clustering routine in coherent chapters and sections. This book summarizes more than 150 research articles published from 2016 to 2018 and provides an informative and concise overview of recent research into anode and cathode materials as well as further aspects such as separators, polymer electrolytes, thermal behavior and modelling. With this prototype, Springer Nature has begun an innovative journey to explore the field of machine-generated content and to find answers to the manifold questions on this fascinating topic. Therefore it was intentionally decided not to manually polish or copy-edit any of the texts so as to highlight the current status and remaining boundaries of machine-generated content. Our goal is to initiate a broad discussion, together with the research community and domain experts, about the future opportunities, challenges and limitations of this technology."--Publisher's website.
Download or read book Active Protective Coatings written by Anthony E. Hughes and published by Springer. This book was released on 2016-03-01 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad range of materials science that has been brought to bear on providing solutions to the challenges of developing self-healing and protective coatings for a range of metals. The book has a strong emphasis on characterisation techniques, particularly new techniques that are beginning to be used in the coatings area. It features many contributions written by experts from various industrial sectors which examine the needs of the sectors and the state of the art. The development of self-healing and protective coatings has been an expanding field in recent years and applies a lot of new knowledge gained from other fields as well as other areas of materials science to the development of coatings. It has borrowed from fields such as the food and pharmaceutical industries who have used, polymer techniques, sol-gel science and colloidosome technology for a range encapsulation techniques. It has also borrowed from fields like hydrogen storage such as from the development of hierarchical and other materials based on organic templating as “nanocontainers” for the delivery of inhibitors. In materials science, recent developments in high throughput and other characterisation techniques, such as those available from synchrotrons, are being increasing used for novel characterisation – one only needs to look at the application of these techniques in self healing polymers to gauge wealth of new information that has been gained from these techniques. This work is largely driven by the need to replace environmental pollutants and hazardous chemicals that represent risk to humans such as chromate inhibitors which are still used in some applications.
Download or read book Liquid Cell Electron Microscopy written by Frances M. Ross and published by Cambridge University Press. This book was released on 2017 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2.6.2 Electrodes for Electrochemistry
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Defects in Two Dimensional Materials written by Rafik Addou and published by Elsevier. This book was released on 2022-02-14 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defects in Two-Dimensional Materials addresses the fundamental physics and chemistry of defects in 2D materials and their effects on physical, electrical and optical properties. The book explores 2D materials such as graphene, hexagonal boron nitride (h-BN) and transition metal dichalcogenides (TMD). This knowledge will enable scientists and engineers to tune 2D materials properties to meet specific application requirements. The book reviews the techniques to characterize 2D material defects and compares the defects present in the various 2D materials (e.g. graphene, h-BN, TMDs, phosphorene, silicene, etc.). As two-dimensional materials research and development is a fast-growing field that could lead to many industrial applications, the primary objective of this book is to review, discuss and present opportunities in controlling defects in these materials to improve device performance in general or use the defects in a controlled way for novel applications. Presents the theory, physics and chemistry of 2D materials Catalogues defects of 2D materials and their impacts on materials properties and performance Reviews methods to characterize, control and engineer defects in 2D materials
Download or read book Physics and Engineering of New Materials written by Do Tran Cat and published by Springer Science & Business Media. This book was released on 2009-01-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the majority of the contributions to the Tenth German-Vietnamese Seminar on Physics and Engineering (GVS10) that took place in the Gustav- Stresemann-Institut (GSI) in Bonn from June 6 to June 9, 2007. In the focus of these studies are the preparation and basic properties of new material systems, related investigation methods, and practical applications. Accordingly the sections in this book are entitled electrons: transport and confinement, low-dimensional systems, magnetism, oxidic materials, organic films, new materials, and methods. The series of German-Vietnamese seminars was initiated and sponsored by the Gottlieb Daimler- and Karl Benz -Foundation since 1998 and took place alt- nately in both countries. These bilateral meetings brought together top-notch senior and junior Vietnamese scientists with German Scientists and stimulated many contacts and co-operations. Under the general title “Physics and Engine- ing” the programs covered, in the form of keynote-lectures, oral presentations and posters, experimental and theoretical cutting-edge material-physics oriented topics. The majority of the contributions was dealing with modern topics of material science, particularly nanoscience, which is a research field of high importance also in Vietnam. Modern material science allows a quick transfer of research results to technical applications, which is very useful for fast developing countries like Vietnam. On the other hand, the seminars took profit from the strong cro- fertilization of the different disciplines of physics. This book is dedicated to the tenth anniversary of the seminars and nicely shows the scientific progress in Vietnam and the competitive level reached.
Download or read book Surface and Thin Film Analysis written by Gernot Friedbacher and published by Wiley-VCH. This book was released on 2011-06-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveying and comparing all techniques relevant for practical applications in surface and thin film analysis, this second edition of a bestseller is a vital guide to this hot topic in nano- and surface technology. This new book has been revised and updated and is divided into four parts - electron, ion, and photon detection, as well as scanning probe microscopy. New chapters have been added to cover such techniques as SNOM, FIM, atom probe (AP),and sum frequency generation (SFG). Appendices with a summary and comparison of techniques and a list of equipment suppliers make this book a rapid reference for materials scientists, analytical chemists, and those working in the biotechnological industry. From a Review of the First Edition (edited by Bubert and Jenett) "... a useful resource..." (Journal of the American Chemical Society)
