Download or read book Electroactive Polymers and Rapid Prototyping written by Yoseph Bar-Cohen and published by Cambridge University Press. This book was released on 2014-06-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of two symposia held at the 2001 MRS Fall Meeting in Boston. Electroactive polymers (EAPs) continue to emerge from anonymity to the spotlight of the science and engineering community. The characteristics of inducing large displacements, lightweight, easy processing, low cost and the functionality to emulate biological muscles are making EAPs attractive for consideration in an increasing number of applications. To make these materials actuators-of choice, however, it is necessary to solidify the technical foundations and identify niche applications where their unique capabilities provide the necessary edge. Papers focus on a wide range of these issues, from fundamental materials understanding and characterization, to new material development, to novel device concepts and demonstrations. Papers also outline many different rapid prototyping approaches including fused deposition of ceramics, stereolithography, microstamping, directed assembly, plasma spray, laser particle guidance, MAPLE DW, laser CVD, micropen, inkjet and several novel liquid or droplet microdispensing approaches.

Download or read book Electroactive Polymers and Rapid Prototyping Volume 698 written by Yoseph Bar-Cohen and published by . This book was released on 2002 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains the contents of two symposia, both held in November 2001: the first part of the volume presents Symposium EE, "Electroactive Polymers and Their Applications as Actuators, Sensors, and Artificial Muscles." These papers address electroactive and nonelectroactive polymers; models, analysis, and simulation of EAP behavior; methods of testing and characterization of EAP properties and performance; support technologies including control, design, and fabrication processes; and applications of EAP actuators. The second part, Symposium Q titled "Rapid Prototyping Technologies--From Tissue Engineering to Conformal Electronics" contains five sections with papers addressing direct writing electronic components; rapid prototyping sensors and structures; energy storage and modeling; liquid and dispensing deposition; and tissue engineering. Annotation copyrighted by Book News, Inc., Portland, OR.

Download or read book Electroactive Polymer EAP Actuators as Artificial Muscles written by Yoseph Bar-Cohen and published by SPIE Press. This book was released on 2004 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the field of EAP with attention to all aspects and full infrastructure, including the available materials, analytical models, processing techniques, and characterization methods. This second edition covers advances in EAP in electric EAP, electroactive polymer gels, ionomeric polymer-metal composites, and carbon nanotube actuators.

Download or read book Introduction to Organic Electronic and Optoelectronic Materials and Devices written by Sam-Shajing Sun and published by CRC Press. This book was released on 2008-05-29 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting rapid growth in research and development on organic/polymeric electronic and photonic materials and devices, Introduction to Organic Electronic and Optoelectronic Materials and Devices provides comprehensive coverage of the state-of-the-art in an accessible format. The book presents fundamentals, principles, and mechanisms complem

Download or read book Electroactive Polymers for Robotic Applications written by Kwang J. Kim and published by Springer Science & Business Media. This book was released on 2007-01-17 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental properties, modeling, and demonstration of Electroactive polymers in robotic applications. It particularly details artificial muscles and sensors. In addition, the book discusses the properties and uses in robotics applications of ionic polymer–metal composite actuators and dielectric elastomers.

Download or read book Selected Topics in Polymer Science in the Pacific Rim written by Pacific Polymer Federation and published by John Wiley & Sons. This book was released on 2003-07-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Pacific Polymer Conference has been one of the most important international events on polymer science and technology since the first meeting was held in Hawaii in 1989. This 7th meeting at Oaxaca in Mexico received high quality papers presented by active scientists from the Pacific Basin Countries, especially from Japan, Korea, and China. This volume covers Novel functional polymers Polymerization chemistry Physical properties of polymers. This volume comprises selected papers presented by invited speakers of different disciplines of polymer science.

Download or read book Direct Write Technologies for Rapid Prototyping Applications written by Alberto Pique and published by Academic Press. This book was released on 2002 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct-Write Technologies covers applications, materials, and the techniques in using direct-write technologies. This book provides an overview of the different direct write techniques currently available, as well as a comparison between the strengths and special attributes for each of the techniques. The techniques described open the door for building prototypes and testing materials. The book also provides an overview of the state-of-the-art technology involved in this field. Basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. Others in this or related fields will want the book to read the introductory material summarizing isuses common to all approaches, in order to compare and contrast different techniques. Everyday applications include electronic components and sensors, especially chemical and biosensors. There is a wide range of research and development problems requiring state-of-the-art direct write tools. This book will appeal to basic researchers and development engineers in university engineering departments and at industrial and national research laboratories. This text should appeal equally well in the United States, Asia, and Europe. Both basic academic researchers and industrial development engineers who pattern thin film materials will want to have this text on their shelves as a resource for specific applications. An overview of the different direct write techniques currently available A comparison between the strengths and special attributes for each of the techniques An overview of the state-of-the-art technology involved in this field

Download or read book Electroactive Polymer Electrochemistry written by Michael E.G. Lyons and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of "tailormade" electrode surfaces using electroactive polymer films has been one of the most active and exciting areas of electrochemistry over the last 15 years. The properties of these materials have been examined by a wide range of scientists from a variety of perspectives, and now electroactive polymer research is considered to be a reasonably mature area of research endeavor. Much is now understood about the fundamental mechanism of conduction in these materials. A wide range of electrochemical techniques may be used to probe the conductivity processes in these materials, and more recently, a number of in situ spectroscopic techniques have been used to further elucidate the structure of these materials. The in situ spectroscopies and allied techniques have also been used to obtain correlations between structure and redox activity. The applications found for electroactive polymers are many and varied, and range from thin film amperometric chemical and biological sensors, electrocatalytic systems, drug delivery devices, and advanced battery systems through to molecular electronic devices. The research literature on electroactive polymers is truly enormous and can daunt even the most hardened researcher. The vast quantity of material reported in the literature can also intimidate beginning graduate students. Hence the present book. The original idea for this book arose as a result of a series of lectures on chemically modified eiectrodes and electroactive polymers given by the writer to final-year undergraduates at Trinity College Dublin.

Download or read book Electroactive polymers written by and published by . This book was released on 1987 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Dielectric Elastomers as Electromechanical Transducers written by Federico Carpi and published by Elsevier. This book was released on 2011-09-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectric Elastomers as Electromechanical Transducers provides a comprehensive and updated insight into dielectric elastomers; one of the most promising classes of polymer-based smart materials and technologies. This technology can be used in a very broad range of applications, from robotics and automation to the biomedical field. The need for improved transducer performance has resulted in considerable efforts towards the development of devices relying on materials with intrinsic transduction properties. These materials, often termed as “smart or “intelligent , include improved piezoelectrics and magnetostrictive or shape-memory materials. Emerging electromechanical transduction technologies, based on so-called ElectroActive Polymers (EAP), have gained considerable attention. EAP offer the potential for performance exceeding other smart materials, while retaining the cost and versatility inherent to polymer materials. Within the EAP family, “dielectric elastomers , are of particular interest as they show good overall performance, simplicity of structure and robustness. Dielectric elastomer transducers are rapidly emerging as high-performance “pseudo-muscular actuators, useful for different kinds of tasks. Further, in addition to actuation, dielectric elastomers have also been shown to offer unique possibilities for improved generator and sensing devices. Dielectric elastomer transduction is enabling an enormous range of new applications that were precluded to any other EAP or smart-material technology until recently. This book provides a comprehensive and updated insight into dielectric elastomer transduction, covering all its fundamental aspects. The book deals with transduction principles, basic materials properties, design of efficient device architectures, material and device modelling, along with applications. Concise and comprehensive treatment for practitioners and academics Guides the reader through the latest developments in electroactive-polymer-based technology Designed for ease of use with sections on fundamentals, materials, devices, models and applications

Download or read book Conductive Electroactive Polymers written by Gordon G. Wallace and published by CRC Press. This book was released on 2008-10-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid advances in synthetic polymer science and nanotechnology have revealed new avenues of development in conductive electroactive polymers that take greater advantage of this versatile class of materials' unique properties. This third edition of Conductive Electroactive Polymers: Intelligent Polymer Systems continues to provide an in-depth unders

Download or read book Biologically Inspired Intelligent Robots written by Yoseph Bar-Cohen and published by SPIE Press. This book was released on 2003 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The multidisciplinary issues involved in the development of biologically inspired intelligent robots include materials, actuators, sensors, structures, functionality, control, intelligence, and autonomy. This book reviews various aspects ranging from the biological model to the vision for the future.

Download or read book Polymers in Organic Electronics written by Sulaiman Khalifeh and published by Elsevier. This book was released on 2020-04-01 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers in Organic Electronics: Polymer Selection for Electronic, Mechatronic, and Optoelectronic Systems provides readers with vital data, guidelines, and techniques for optimally designing organic electronic systems using novel polymers. The book classifies polymer families, types, complexes, composites, nanocomposites, compounds, and small molecules while also providing an introduction to the fundamental principles of polymers and electronics. Features information on concepts and optimized types of electronics and a classification system of electronic polymers, including piezoelectric and pyroelectric, optoelectronic, mechatronic, organic electronic complexes, and more. The book is designed to help readers select the optimized material for structuring their organic electronic system.Chapters discuss the most common properties of electronic polymers, methods of optimization, and polymeric-structured printed circuit boards. The polymeric structures of optoelectronics and photonics are covered and the book concludes with a chapter emphasizing the importance of polymeric structures for packaging of electronic devices. Provides key identifying details on a range of polymers, micro-polymers, nano-polymers, resins, hydrocarbons, and oligomers Covers the most common electrical, electronic, and optical properties of electronic polymers Describes the underlying theories on the mechanics of polymer conductivity Discusses polymeric structured printed circuit boards, including their rapid prototyping and optimizing their polymeric structures Shows optimization methods for both polymeric structures of organic active electronic components and organic passive electronic components

Download or read book 3D Bioprinting in Regenerative Engineering written by Ali Khademhosseini and published by CRC Press. This book was released on 2018-04-17 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Regenerative engineering is the convergence of developmental biology, stem cell science and engineering, materials science, and clinical translation to provide tissue patches or constructs for diseased or damaged organs. Various methods have been introduced to create tissue constructs with clinically relevant dimensions. Among such methods, 3D bioprinting provides the versatility, speed and control over location and dimensions of the deposited structures. Three-dimensional bioprinting has leveraged the momentum in printing and tissue engineering technologies and has emerged as a versatile method of fabricating tissue blocks and patches. The flexibility of the system lies in the fact that numerous biomaterials encapsulated with living cells can be printed. This book contains an extensive collection of papers by world-renowned experts in 3D bioprinting. In addition to providing entry-level knowledge about bioprinting, the authors delve into the latest advances in this technology. Furthermore, details are included about the different technologies used in bioprinting. In addition to the equipment for bioprinting, the book also describes the different biomaterials and cells used in these approaches. This text: Presents the principles and applications of bioprinting Discusses bioinks for 3D printing Explores applications of extrusion bioprinting, including past, present, and future challenges Includes discussion on 4D Bioprinting in terms of mechanisms and applications

Download or read book Technical Economic and Societal Effects of Manufacturing 4 0 written by Mikael Collan and published by Springer Nature. This book was released on 2020-07-28 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is among the first cross-disciplinary works about Manufacturing 4.0. It includes chapters about the technical, the economic, and the social aspects of this important phenomenon. Together the material presented allows the reader to develop a holistic picture of where the manufacturing industry and the parts of the society that depend on it may be going in the future. Manufacturing 4.0 is not only a technical change, nor is it a purely technically driven change, but it is a societal change that has the potential to disrupt the way societies are constructed both in the positive and in the negative. This book will be of interest to scholars researching manufacturing, technological innovation, innovation management and industry 4.0.

Download or read book Soft Actuators written by Kinji Asaka and published by Springer. This book was released on 2014-11-17 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of this book is the current comprehensive research and development of soft actuators, and encompasses interdisciplinary studies of materials science, mechanics, electronics, robotics and bioscience. As an example, the book includes current research on actuators based on biomaterials to provide future perspectives for artificial muscle technology. Readers can obtain detailed, useful information about materials, methods of synthesis, fabrication and measurements. The topics covered here not only promote further research and development of soft actuators but also lead the way to their utilization and industrialization. One outstanding feature of the book is that it contains many color figures, diagrams and photographs clearly describing the mechanism, apparatus and motion of soft actuators. The chapter on modeling is conducive to more extensive design work in materials and devices and is especially useful in the development of practical applications. Readers can acquire the newest technology and information about the basic science and practical applications of flexible, lightweight and noiseless soft actuators, which are quite unlike conventional mechanical engines and electric motors. The new ideas offered in this volume will provide inspiration and encouragement to researchers and developers as they explore new fields of applications for soft actuators.

Download or read book Advances in Manufacturing and Processing of Materials and Structures written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2018-09-03 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Manufacturing and Processing of Materials and Structures cover the latest advances in materials and structures in manufacturing and processing including additive and subtractive processes. It's intended to provide a compiled resource that reviews details of the advances that have been made in recent years in manufacturing and processing of materials and structures. A key development incorporated within this book is 3D printing, which is being used to produce complex parts including composites with odd shape fibers, as well as tissue and body organs. This book has been tailored for engineers, scientists and practitioners in different fields such as aerospace, mechanical engineering, materials science and biomedicine. Biomimetic principles have also been integrated. Features Provides the latest state-of-the art on different manufacturing processes, including a biomimetics viewpoint Offers broad coverage of advances in materials and manufacturing Written by chapter authors who are world-class researchers in their respective fields Provides in-depth presentation of the latest 3D and 4D technologies related to various manufacturing disciplines Provides substantial references in each chapter to enhance further study