Download or read book Electro pneumatic Shifting and Servo Control of a Clutch for a FSAE Racecar written by Rahul Janardhan Chalmela and published by . This book was released on 2017 with total page 59 pages. Available in PDF, EPUB and Kindle. Book excerpt: FSAE is an international student design competition held by SAE International where students design, build and compete in static events like cost, design and dynamic events ranging from acceleration, autocross to endurance. UTA Racing has been a part of FSAE since 1982 and have been using a mechanical design for their shifter and clutch since then. This year for the 2017 design competition an electro-pneumatic system is developed to replace the mechanical system. This system consists of pneumatic cylinders controlling a sequential shifter and a servo clutch. The cylinders are controlled using direction control valves, these receive their signals from a microcontroller which has been programmed accordingly. The major part of this thesis defines the development of a feedback controlled servo clutch for the racecar. This sub system is unique by itself as this is the first time UTA Racing would be using an electro-pneumatic clutch. The shifter reduces the shift times from 150 milliseconds to 75 milliseconds. The report also includes selection of the pneumatic tank to last an endurance event which requires approximately 1000 gear shifts. The Electro-pneumatic system not only reduces effort seen by the driver while shifting but also substantially improves the lap-times thereby increasing performance during the dynamic events.

Download or read book Design of a Pneumatically Assisted Shifting System for Formula SAE Racing Applications written by Andrew John Kennett and published by . This book was released on 2008 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: An improved shifting system for use with the MIT Formula SAE race car was designed in order to provide drivers with a faster and easier means of shifting. The result of this design was a pneumatic shifting system weighing just 3.6 pounds and capable of shifting the car's transmission in 200ms (downshifts are slightly slower because they require the use of the clutch). Shifts are initiated through buttons on the steering wheel and controlled through the car's engine control processor. An ergonomic clutch was also designed in order to help shift more easily and provide more control of the vehicle. This document describes, from beginning to end, the design process involved in creating these systems and provides justification for each decision that was made along the way.

Download or read book Design and Fabrication of a Pneumatically Actuated Shifting System for a Formula SAE Racecar written by Eliot Francis Drake and published by . This book was released on 2002 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis Techniques for Racecar Data Acquisition written by Jorge Sergers and published by SAE International. This book was released on 2014-02-24 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Racecar data acquisition used to be limited to well-funded teams in high-profile championships. Today, the cost of electronics has decreased dramatically, making them available to everyone. But the cost of any data acquisition system is a waste of money if the recorded data is not interpreted correctly. This book, updated from the best-selling 2008 edition, contains techniques for analyzing data recorded by any vehicle's data acquisition system. It details how to measure the performance of the vehicle and driver, what can be learned from it, and how this information can be used to advantage next time the vehicle hits the track. Such information is invaluable to racing engineers and managers, race teams, and racing data analysts in all motorsports. Whether measuring the performance of a Formula One racecar or that of a road-legal street car on the local drag strip, the dynamics of vehicles and their drivers remain the same. Identical analysis techniques apply. Some race series have restricted data logging to decrease the team’s running budgets. In these cases it is extremely important that a maximum of information is extracted and interpreted from the hardware at hand. A team that uses data more efficiently will have an edge over the competition. However, the ever-decreasing cost of electronics makes advanced sensors and logging capabilities more accessible for everybody. With this comes the risk of information overload. Techniques are needed to help draw the right conclusions quickly from very large data sets. In addition to updates throughout, this new edition contains three new chapters: one on techniques for analyzing tire performance, one that provides an introduction to metric-driven analysis, a technique that is used throughout the book, and another that explains what kind of information the data contains about the track.

Download or read book Brake Design and Safety written by Rudolf Limpert and published by SAE International. This book was released on 1999-07-16 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written to help engineers to design safer brakes that can be operated and maintained easily. All the necessary analytical tools to study and determine the involvement of brakes in accident causation are included as well as all essential concepts, guidelines, and design checks.

Download or read book Vehicle Dynamics and Control written by Rajesh Rajamani and published by Springer Science & Business Media. This book was released on 2011-12-21 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicle Dynamics and Control provides a comprehensive coverage of vehicle control systems and the dynamic models used in the development of these control systems. The control system applications covered in the book include cruise control, adaptive cruise control, ABS, automated lane keeping, automated highway systems, yaw stability control, engine control, passive, active and semi-active suspensions, tire-road friction coefficient estimation, rollover prevention, and hybrid electric vehicles. In developing the dynamic model for each application, an effort is made to both keep the model simple enough for control system design but at the same time rich enough to capture the essential features of the dynamics. A special effort has been made to explain the several different tire models commonly used in literature and to interpret them physically. In the second edition of the book, chapters on roll dynamics, rollover prevention and hybrid electric vehicles have been added, and the chapter on electronic stability control has been enhanced. The use of feedback control systems on automobiles is growing rapidly. This book is intended to serve as a useful resource to researchers who work on the development of such control systems, both in the automotive industry and at universities. The book can also serve as a textbook for a graduate level course on Vehicle Dynamics and Control.

Download or read book Fundamentals of Vehicle Dynamics written by Thomas Gillespie and published by SAE International. This book was released on 2021-04-29 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A world-recognized expert in the science of vehicle dynamics, Dr. Thomas Gillespie has created an ideal reference book that has been used by engineers for 30 years, ranging from an introduction to the subject at the university level to a common sight on the desks of engineers throughout the world. As with the original printing, Fundamentals of Vehicle Dynamics, Revised Edition, strives to find a middle ground by balancing the need to provide detailed conceptual explanations of the engineering principles involved in the dynamics of ground vehicles with equations and example problems that clearly and concisely demonstrate how to apply such principles. A study of this book will ensure that the reader comes away with a solid foundation and is prepared to discuss the subject in detail. Ideal as much for a first course in vehicle dynamics as it is a professional reference, Fundamentals of Vehicle Dynamics, Revised Edition, maintains the tradition of the original by being easy to read and while receiving updates throughout in the form of modernized graphics and improved readability. Inasmuch as the first edition proved to be so popular, the Revised Edition intends to carry on that tradition for a new generation of engineers.

Download or read book Engine Failure Analysis written by Ernst Greuter and published by SAE International. This book was released on 2012-06-12 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engine failures result from a complex set of conditions, effects, and situations. To understand why engines fail and remedy those failures, one must understand how engine components are designed and manufactured, how they function, and how they interact with other engine components. To this end, this book examines how engine components are designed and how they function, along with their physical and technical properties. Translated from a popular German reference work, this English edition sheds light on determining engine failure and remedies. The authors present a selection of engine failures, investigate and evaluate why they failed, and provide guidance on how to prevent such failures. A large range of possible engine failures is presented in a comprehensive, readily understandable manner, free of manufacturer bias. The scope of engines covered includes general-purpose engines found in heavy commercial vehicles, railway locomotives and vehicles, electrical generators, prime movers, and marine engines. Such engines are technical precursors to automotive engines. This book is for all who deal with engine failures: those who work in repair shops, shipyards, engineering consultancies, insurance companies and technical oversight organizations, as well as R&D departments at engine and component manufacturers. Researchers, academics, and students will learn how even the theoretically impossible can-and will-happen.

Download or read book 5th International Munich Chassis Symposium 2014 written by Peter E. Pfeffer and published by Springer. This book was released on 2014-07-18 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: The key drivers of innovation in the field of chassis systems are measures to improve vehicle dynamics and driving safety, efforts to reduce fuel consumption, and intelligent development methods. In addition, chassis development is focusing on enhancing ride comfort while also improving NVH characteristics. At the same time, modularization strategies, concepts for the electrification of the powertrain, and steps towards greater system connectivity are making increasingly complex demands on the chassis and its development. Developers are being called upon to respond to these challenges with a variety of solutions.

Download or read book Advances in Materials Processing and Manufacturing Applications written by Amar Patnaik and published by Springer. This book was released on 2022-06-24 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the International Conference on Advances in Materials Processing and Manufacturing Applications (iCADMA 2020), held on November 5–6, 2020, at Malaviya National Institute of Technology, Jaipur, India. iCADMA 2020 proceedings is divided into four topical tracks – Advanced Materials, Materials Manufacturing and Processing, Engineering Optimization and Sustainable Development, and Tribology for Industrial Application.

Download or read book Tire and Vehicle Dynamics written by Hans Pacejka and published by Elsevier. This book was released on 2012-04-12 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive book on tire mechanics by the acknowledged world expert - Covers everything you need to know about pneumatic tires and their impact on vehicle performance, including mathematic modeling and its practical application - Written by the acknowledged world authority on the topic and the name behind the most widely used model, Pacejka's 'Magic Formula' - Updated with the latest information on new and evolving tire models to ensure you can select the right model for your needs, apply it appropriately and understand its limitations In this well-known resource, leading tire model expert Hans Pacejka explains the relationship between operational variables, vehicle variables and tire modeling, taking you on a journey through the effective modeling of complex tire and vehicle dynamics problems. Covering the latest developments to Pacejka's own industry-leading model as well as the widely-used models of other pioneers in the field, the book combines theory, guidance, discussion and insight in one comprehensive reference. While the details of individual tire models are available in technical papers published by SAE, FISITA and other automotive organizations, Tire and Vehicle Dynamics remains the only reliable collection of information on the topic and the standard go-to resource for any engineer or researcher working in the area. - New edition of the definitive book on tire mechanics, by the acknowledged world authority on the topic - Covers everything an automotive engineer needs to know about pneumatic tires and their impact on vehicle performance, including mathematic modelling and its practical application - Most vehicle manufacturers use what is commonly known as Pacejka's 'Magic Formula', the tire model developed and presented in this book

Download or read book The 11th IFToMM International Symposium on Science of Mechanisms and Machines written by Ion Visa and published by Springer Science & Business Media. This book was released on 2013-10-18 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: The general topic of the symposium follows mechanisms development through all stages of conception, modeling, analysis, synthesis and control to advanced product design. This volume brings together the latest results in the field and celebrates a series of conferences that has been running for 40 years. The contributors and the editor are world leaders in their field.

Download or read book Introduction to autogyros helicopters and other V STOL aircraft written by Franklin D. Harris and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 11th International Munich Chassis Symposium 2020 written by Peter E. Pfeffer and published by Springer Nature. This book was released on 2021-06-14 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing automation of driving functions and the electrification of powertrains present new challenges for the chassis with regard to complexity, redundancy, data security, and installation space. At the same time, the mobility of the future will also require entirely new vehicle concepts, particularly in urban areas. The intelligent chassis must be connected, electrified, and automated in order to be best prepared for this future. Contents New Chassis Systems.- Handling and Vehicle Dynamics.- NVH – Acoustics and Vibration in the Chassis.- Smart Chassis, ADAS, and Autonomous Driving.- Lightweight Design.- Innovative Brake Systems.- Brakes and the Environment.- Electronic Chassis Systems.- Virtual Chassis Development and Homologation.- Innovative Steering Systems and Steer-by-Wire.- Development Process, System Properties and Architecture.- Innovations in Tires and Wheels. Target audiences Automotive engineers and chassis specialists as well as students looking for state-of-the-art information regarding their field of activity - Lecturers and instructors at universities and universities of applied sciences with the main subject of automotive engineering - Experts, researchers and development engineers of the automotive and the supplying industry Publisher ATZ live stands for top quality and a high level of specialist information and is part of Springer Nature, one of the leading publishing groups worldwide for scientific, educational and specialist literature. Partner TÜV SÜD is an international leading technical service organisation catering to the industry, mobility and certification segment.

Download or read book Platform Based Design written by Alberto Sangiovanni-Vincentelli and published by Springer. This book was released on 2012-08-09 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems design becomes more complex as increasingly sophisticated functionality is added to designs. In addition to considerations of cost, performance, and time-to-market, various system integration issues become challenging, given the inherently heterogeneous nature of embedded systems. Platform Based Design introduces a rigorous design methodology to address the various challenges posed by complex, heterogeneous, embedded systems.

Download or read book Reconfigurable Manufacturing Systems and Transformable Factories written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2007-06-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear reader! In your hand you have the second book from the series “XXI Century Techno- gies. ” The first book under the title “Manufacturing Technologies for Machines of the Future” was published by “Springer” in 2003. This book is aimed at solving one of the basic problems in the development of modern machine-building – working out of technologies and manufacturing equipment which would promote the continuous development and improvement of the final product design, rapidly “adaptable” to the requirements of the market as for the quantity, quality, and variety of products manufactured with the lowest cost and minimum time and labor of the product process. In this book the problems of theory and practice of development in the reconfigurable manufacturing systems and transformable factories for various machine-building branches with a focus on automotive industry are discussed. The problems concerning the development of a new class of production systems which in comparison to the flexible manufact- ing systems are composed of a far less quantity of machine-tools (reduced cost of production) are discussed. In comparison to the conventional automated lines (dedicated systems) they make it possible to rapidly transform the equipment for new products manufacturing. The book has some advantages concerning the art of scientific ideas and the presentation of developments.

Download or read book Medicine Meets Virtual Reality 2001 written by James D. Westwood and published by IOS Press. This book was released on 2001 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anatomical Accuracy in Medical 3D Modeling