Download or read book Electro Hydraulic Control Theory and Its Applications Under Extreme Environment written by Yaobao Yin and published by Butterworth-Heinemann. This book was released on 2019-02-16 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro hydraulic Control Theory and Its Applications under Extreme Environment not only presents an overview on the topic, but also delves into the fundamental mathematic models of electro hydraulic control and the application of key hydraulic components under extreme environments. The book contains chapters on hydraulic system design, including thermal analysis on hydraulic power systems in aircraft, power matching designs of hydraulic rudder, and flow matching control of asymmetric valves and cylinders. With additional coverage on new devices, experiments and application technologies, this book is an ideal reference on the research and development of significant equipment. Addresses valves' application in aircrafts, including servo valves, relief valves and pressure reducing valves Presents a qualitative and quantitative forecast of future electro-hydraulic servo systems, service performance, and mechanization in harsh environments Provides analysis methods, mathematical models and optimization design methods of electro-hydraulic servo valves under extreme environments
Download or read book On Electrohydraulic Pressure Control for Power Steering Applications written by Alessandro Dell'Amico and published by Linköping University Electronic Press. This book was released on 2016-02-04 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with the Electrohydraulic Power Steering system for road vehicles, using electronic pressure control valves. With an ever increasing demand for safer vehicles and fewer traffic accidents, steering-related active safety functions are becoming more common in modern vehicles. Future road vehicles will also evolve towards autonomous vehicles, with several safety, environmental and financial benefits. A key component in realising such solutions is active steering. The power steering system was initially developed to ease the driver's workload by assisting in turning the wheels. This is traditionally done through a passive open-centre hydraulic system and heavy trucks must still rely on fluid power, due to the heavy work forces. Since the purpose of the original system is to control the assistive pressure, one way would be to use proportional pressure control valves. Since these are electronically controlled, active steering is possible and with closed-centre, energy efficiency can be significantly improved on. In this work, such a system is analysed in detail with the purpose of investigating the possible use of the system for Boost curve control and position control for autonomous driving. Commercially available valves are investigated since they provide an attractive solution. A model-based approach is adopted, where simulation of the system is an important tool. Another important tool is hardware-in-the-loop simulation. A test rig of an electrohydraulic power steering system, is developed. This work has shown how proportional pressure control valves can be used for Boost curve control and position control and what implications this has on a system level. As it turns out, the valves add a great deal of time lag and with the high gain from the Boost curve, this creates a control challenge. The problem can be handled by tuning the Boost gain, pressure response and damping and has been effectively shown through simulation and experiments. For position control, there is greater freedom to design the controller to fit the system. The pressure response can be made fast enough for this case and the time lag is much less critical.
Download or read book Electro Hydraulic Power written by Shanae Lavzon and published by . This book was released on 2021-03-18 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro-Hydrostatic actuators (EHAs), replace hydraulic systems with self-contained actuators operated solely by electrical power. EHAs eliminate the need for separate hydraulic pumps and tubing, simplifying system architectures and improving safety and reliability. This book will give you: Electro Hydraulic Forming: How Does Electro-Hydr Aulic Work? Electro Hydraulic Valve: What Is Electro-Hydraulic Control System? Electro Hydraulic Power: How Does A Electro-Hydraulic Servo Valve Work?
Download or read book Electro Hydraulic Components and Systems written by Medhat M K Dr Khalil and published by . This book was released on 2017-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second in its series. The book focuses on the electrohydraulic valves in building open-loop and closed-loop control systems. The book also covers the control electronics that drive the EH valves.
Download or read book Hydraulic and Electro Hydraulic Control Systems written by R.B. Walters and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power at fractional horsepower level. A further, and frequently range, specifically overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
Download or read book The Design of an Electro hydraulic Power Pack for Deep Sea Operation written by David Mark Di Pietro and published by . This book was released on 1986 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electro Hydraulic Valve written by Aaron Parchman and published by . This book was released on 2021-03-18 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro-Hydrostatic actuators (EHAs), replace hydraulic systems with self-contained actuators operated solely by electrical power. EHAs eliminate the need for separate hydraulic pumps and tubing, simplifying system architectures and improving safety and reliability. This book will give you: Electro Hydraulic Forming: How Does Electro-Hydr Aulic Work? Electro Hydraulic Valve: What Is Electro-Hydraulic Control System? Electro Hydraulic Power: How Does A Electro-Hydraulic Servo Valve Work?
Download or read book Controlling Electrohydraulic Systems written by Wayne Anderson and published by CRC Press. This book was released on 1988-01-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the pump's role in electrohydraulic systems and its use as a power source to a control loop, and provides a good understanding of the basics, complemented by working knowledge of the "real world." It is intended for engineers and students who have studied feedback control theory.
Download or read book Hydraulic and Electric Hydraulic Control Systems written by R.B. Walters and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power range, specifically at fractional horsepower level. A further, and frequently overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
Download or read book Electro Hydraulic Forming written by Jenny Haffling and published by Independently Published. This book was released on 2021-03-19 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electro-Hydrostatic actuators (EHAs), replace hydraulic systems with self-contained actuators operated solely by electrical power. EHAs eliminate the need for separate hydraulic pumps and tubing, simplifying system architectures and improving safety and reliability. This book will give you: Electro Hydraulic Forming: How Does Electro-Hydr Aulic Work? Electro Hydraulic Valve: What Is Electro-Hydraulic Control System? Electro Hydraulic Power: How Does A Electro-Hydraulic Servo Valve Work?
Download or read book Fluid Power Transmission And Control written by A. Alavudeen and published by CHAROTARPUBLISHINGHOUSEP.LTD. This book was released on 2007 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text-book provides an in-depth background in the field of Fluid Power, It covers Design, Analysis, Operation and Maintenance. The reader will find this book useful for a clear understanding of the subject and also to assist in the selection and troubleshooting of fluid power components and systems used in manufacturing operations, providing a systematic summary of the fundamentals of hydraulic power transmission. This book discusses the main characteristics of hydraulic drives and their most important types in a manner comprehensible even to newcomers of the subject. This book covers a broad range of topics in the field, including: physical properties of hydraulic fluids; energy and power in hydraulic systems; frictional losses in hydraulic pipelines; hydraulic pumps, cylinders, cushioning devices, motors, valves, circuit design, conductors and fittings; hydraulic system maintenance; pneumatic air preparation and its components; and electrical controls for fluid power systems. It provides everything you need to understand the fundamental operating principles as well as the latest maintenance, repair and reconditioning techniques for industrial oil hydraulic systems. Better understanding of the material is promoted by the sample solutions to various mathematical problems given in each chapter. A number of photographs and illustration have been attached to reflect current "Fluid Power system".
Download or read book A Brushless DC Motor Control System for Electro hydraulic Power Steering written by Gregory A. Tomaschko and published by . This book was released on 2000 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Power System Analysis written by Arthur Akers and published by CRC Press. This book was released on 2006-04-17 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The excitement and the glitz of mechatronics has shifted the engineering community's attention away from fluid power systems in recent years. However, fluid power still remains advantageous in many applications compared to electrical or mechanical power transmission methods. Designers are left with few practical resources to help in the design and
Download or read book Hydraulic and Electro Hydraulic Control Systems written by R.B. Walters and published by Springer Science & Business Media. This book was released on 1991-04-30 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Force and motion control systems of varying degrees of sophistication have shaped the lives of all individuals living in industrialized countries all over the world, and together with communication technology are largely responsible for the high standard ofliving prevalent in many communities. The brains of the vast majority of current control systems are electronic, in the shape of computers, microprocessors or programmable logic controllers (PLC), the nerves are provided by sensors, mainly electromech anical transducers, and the muscle comprises the drive system, in most cases either electric, pneumatic or hydraulic. The factors governing the choice of the most suitable drive are the nature of the application, the performance specification, size, weight, environ mental and safety constraints, with higher power levels favouring hydraulic drives. Past experience, especially in the machine tool sector, has clearly shown that, in the face of competition from electric drives, it is difficult to make a convincing case for hydraulic drives at the bottom end of the power at fractional horsepower level. A further, and frequently range, specifically overriding factor in the choice of drive is the familiarity of the system designer with a particular discipline, which can inhibit the selection of the optimum and most cost-effective solution for a given application. One of the objectives of this book is to help the electrical engineer overcome his natural reluctance to apply any other than electric drives.
Download or read book Electro hydraulic Feedforward Control Power Steering System for Trucks and Buses written by F. Momiyama and published by . This book was released on 1989 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electro Hydraulic Actuation Systems written by J. Jaidev Vyas and published by Springer. This book was released on 2018-09-01 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book serves as a unique integrated platform, which not only describes the design methodology of electro-hydraulic actuation systems but also provides insights into the design of the servo valve, which is the most important component in the system. It presents a step-by-step design process, comparative tables, illustrative figures, and detailed explanations. The book focuses on the design and testing of electro-hydraulic actuation systems, which are increasingly being used in motion control applications, particularly in those where precision actuation at high operational rates is of prime importance. It describes in detail the design philosophy of such high-performance systems, presenting a system used as a physical test setup together with experimental results to corroborate the calculations. Of particular interest are the electro-hydraulic servo valves that form the heart of these actuations. These valves are complex and not much data is available in open literature due to OEM propriety issues. In this context, the book discusses the elaborate mathematical models that have been derived and an approach to validate the mathematical models with test results. Presenting the complex methodology in simple language, it will prove to be a valuable resource for students, researchers, and professional engineers alike.
Download or read book Fluid Power Pumps and the Electrification written by Samuel Kärnell and published by Linköping University Electronic Press. This book was released on 2020-05-25 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more vehicles are being electrified. Mobile working machines and heavy trucks are not excluded, and these machines are often hydraulically intense. Electrification entails new requirements for the hydraulic system and its components, and these requirements must be taken into consideration. Hydraulic systems have looked similar for a long time, but now there is an opportunity to advance. Many things change when a diesel engine is replaced with an electric motor. For example, variable-speed control becomes more relevant, electric regeneration becomes possible, and the use of multiple prime movers becomes an attractive alternative. The noise from the hydraulic system will also be more noticeable when the diesel engine is gone. Furthermore, the introduction of batteries to the system makes the energy more valuable, since batteries are heavy and costly compared to a diesel tank. Therefore, it is commercially viable to invest in the hydraulic system. This thesis revolves around the heart of the hydraulic system, that also is the root of all evil. That is the pump. Traditionally, a pump has had either a fixed displacement or a continuously variable displacement. Here, the focus is on something in between, namely a pump with discrete displacement. The idea of discrete displacement is far from unique, but has not been investigated in detail in combination with variable speed before. In this thesis, a novel design for a quiet pump with discrete displacement is presented and analysed. The results show that discrete displacement is relevant from an energy perspective for machines working extensively at high pressure levels and with low flow rates, and that a few discrete values are enough to make a significant difference. However, for other cycles, the possible energy gains are very limited, but the discrete displacement can be a valuable feature if downsizing the electric machine is of interest.
