Download or read book Electro deformation of a Moving Boundary written by Herve Nganguia and published by . This book was released on 2014 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation focuses on the deformation of a viscous drop and a vesicle immersed in a (leaky) dielectric fluid under an electric field. A number of mathematical tools, both analytical and numerical, are developed for these investigations. The dissertation is divided into three parts. First, a large-deformation model is developed to capture the equilibrium deformation of a viscous spheroidal drop covered with non-diffusing insoluble surfactant under a uniform direct current (DC) electric field. The large- deformation model predicts the dependence of equilibrium spheroidal drop shape on the permittivity ratio, conductivity ratio, surfactant coverage, and the elasticity number. Results from the model are carefully compared against the small-deformation (quasispherical) analysis, experimental data and numerical simulation results in the literature. Moreover, surfactant effects, such as tip stretching and surface dilution effects, are greatly amplified at large surfactant coverage and high electric capillary number. These effects are well captured by the spheroidal model, but cannot be described in the second-order small-deformation theory. The large-deformation spheroidal model is then extended to study the equilibrium deformation of a giant unilamellar vesicle (GUV) under an alternating current (AC) electric field. The vesicle membrane is modeled as a thin capacitive spheroidal shell and the equilibrium vesicle shape is computed from balancing the mechanical forces between the fluid, the membrane and the imposed electric field. Detailed comparison against both experiments and small-deformation theory shows that the spheroidal model gives better agreement with experiments in terms of the dependence on fluid conductivity ratio, electric field strength and frequency, and vesicle size. Asymptotic analysis is conducted to compute the crossover frequency where a prolate vesicle crosses over to an oblate shape, and comparisons show the spheroidal model gives better agreement with experimental observations. Finally, a numerical scheme based on immersed interface method for two-phase fluids is developed to simulate the time-dependent dynamics of an axisymmetric drop in an electric field. The second-order immersed interface method is applied to solving both the fluid velocity field and the electric field. To date this has not been done before in the literature. Detailed numerical studies on this new numerical scheme shows numerical convergence and good agreement with the large-deformation model. Dynamics of an axisymmetric viscous drop under an electric field is being simulated using this novel numerical code.

Download or read book Computational Modelling of Free and Moving Boundary Problems II written by Luiz C. Wrobel and published by . This book was released on 1993 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Electromagnetic Solids written by J.S. Yang and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mechanics of electromagnetic materials and structures has been developing rapidly with extensive applications in, e. g. , electronics industry, nuclear engineering, and smart materials and structures. Researchers in this interdisciplinary field are with diverse background and motivation. The Symposium on the Mechanics of Electromagnetic Materials and Structures of the Fourth International Conference on Nonlinear Mechanics in Shanghai, China in August 13-16, 2002 provided an opportunity for an intimate gathering of researchers and exchange of ideas. This volume contains papers based on most of the presentations at the symposium, and articles from a few invited contributors. These papers reflect some of the recent activities in the mechanics of electromagnetic materials and structures. The first twelve papers are in the order in which they were listed in the program of the conference. These are followed by six invited papers in alphabetical order of the last names of the first authors. We would like to extend our sincere thanks to Professor David Y. Gao of Virginia Tech for suggesting the symposium, and to the authors for their time and effort invested in preparing their manuscripts. We are also grateful to Professor Daining Fang of Tsinghua University for co-chairing the symposium with J. S. Yang. Our special thanks belong to Kluwer for preparing this book for publication. J. S. Yang G. A. Maugin PIEZOELECTRIC VIBRATORY GYROSCOPES J. S.

Download or read book Computational Electromagnetic Aerodynamics written by Joseph J. S. Shang and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical algorithms, procedures, and techniques required to solve engineering problems relating to the interactions between electromagnetic fields and fluid flow and interdisciplinary technology for aerodynamics, electromagnetics, chemical-physic kinetics, and plasmadynamics Integrates interlinking computational model and simulation techniques of aerodynamics and electromagnetics Combines classic plasma drift-diffusion theory and electron impact ionization modeling for electromagnetic-aerodynamic interactions Describes models of internal degrees of freedom for vibration relaxation and electron excitations

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Interfacial Electrokinetics and Electrophoresis written by Angel V. Delgado and published by CRC Press. This book was released on 2001-12-04 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interfacial Electtrokinetics and Electrophoresis presents theoretical models and experimental procedures for the analysis of electrokinetic phenomena. It discusses the physics and chemistry of solid/liquid, liquid/liquid, and gas/liquid interfaces, and offers applications for the printing, environmental, pharmaceutical and biomedical industries.

Download or read book Computational Modelling of Free and Moving Boundary Problems Heat transfer written by Luiz C. Wrobel and published by . This book was released on 1991 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Computational Modelling of Free and Moving Boundary Problems written by Luiz C. Wrobel and published by . This book was released on 1991 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electroactive Polymer EAP Actuators as Artificial Muscles written by Yoseph Bar-Cohen and published by SPIE Press. This book was released on 2004 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the field of EAP with attention to all aspects and full infrastructure, including the available materials, analytical models, processing techniques, and characterization methods. This second edition covers advances in EAP in electric EAP, electroactive polymer gels, ionomeric polymer-metal composites, and carbon nanotube actuators.

Download or read book Ionic Polymer Metal Composites for Sensors and Actuators written by Inamuddin and published by Springer. This book was released on 2019-03-16 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the fundamental of bending actuation with a focus on ionic metal composites. It describes the applications of ionic polymer metal composite (IPMC) actuators, from conventional robotic systems to compliant micro robotic systems used to handle the miniature and fragile components during robotic micro assembly. It also presents mathematical modelings of actuators for engineering, biomedical, medical and environmental systems. The fundamental relation of IPMC actuators to the biomimetic systems are also included.

Download or read book Advanced Materials for Thermal Management of Electronic Packaging written by Xingcun Colin Tong and published by Springer Science & Business Media. This book was released on 2011-01-05 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for advanced thermal management materials in electronic packaging has been widely recognized as thermal challenges become barriers to the electronic industry’s ability to provide continued improvements in device and system performance. With increased performance requirements for smaller, more capable, and more efficient electronic power devices, systems ranging from active electronically scanned radar arrays to web servers all require components that can dissipate heat efficiently. This requires that the materials have high capability of dissipating heat and maintaining compatibility with the die and electronic packaging. In response to critical needs, there have been revolutionary advances in thermal management materials and technologies for active and passive cooling that promise integrable and cost-effective thermal management solutions. This book meets the need for a comprehensive approach to advanced thermal management in electronic packaging, with coverage of the fundamentals of heat transfer, component design guidelines, materials selection and assessment, air, liquid, and thermoelectric cooling, characterization techniques and methodology, processing and manufacturing technology, balance between cost and performance, and application niches. The final chapter presents a roadmap and future perspective on developments in advanced thermal management materials for electronic packaging.

Download or read book Electrical Contacts written by Milenko Braunovic and published by CRC Press. This book was released on 2017-12-19 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various factors affect the performance of electrical contacts, including tribological, mechanical, electrical, and materials aspects. Although these behaviors have been studied for many years, they are not widely used or understood in practice. Combining approaches used across the globe, Electrical Contacts: Fundamentals, Applications, and Technology integrates advances in research and development in the tribological, material, and analytical aspects of electrical contacts with new data on electrical current transfer at the micro- and nanoscales. Taking an application-oriented approach, the authors illustrate how material characteristics, tribological behavior, and loading impact the degradation of contacts, formation of intermetallics, and overall reliability and performance. Coverage is divided broadly into three sections, with the first focused on mechanics, tribology, materials, current and heat transfer, and basic reliability issues of electrical contacts. The next section explores applications, such as power connections, electronic connections, and sliding contacts, while the final section presents the diagnostic and monitoring techniques used to investigate and measure phenomena occurring at electrical contact interfaces. Numerous references to current literature reflect the fact that this book is the most comprehensive survey in the field. Explore an impressive collection of data, theory, and practical applications in Electrical Contacts: Fundamentals, Applications, and Technology, a critical tool for anyone investigating or designing electrical equipment with improved performance and reliability in mind.

Download or read book Dynamic Stability and Bifurcation in Nonconservative Mechanics written by Davide Bigoni and published by Springer. This book was released on 2018-07-09 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers a unified view on classical results and recent advances in the dynamics of nonconservative systems. The theoretical fundamentals are presented systematically and include: Lagrangian and Hamiltonian formalism, non-holonomic constraints, Lyapunov stability theory, Krein theory of spectra of Hamiltonian systems and modes of negative and positive energy, anomalous Doppler effect, reversible systems, sensitivity analysis of non-self-adjoint operators, dissipation-induced instabilities, local and global instabilities. They are applied to engineering situations such as the coupled mode flutter of wings, flags and pipes, flutter in granular materials, piezoelectric mechanical metamaterials, wave dynamics of infinitely long structures, radiative damping, stability of high-speed trains, experimental realization of follower forces, soft-robot locomotion, wave energy converters, friction-induced instabilities, brake squeal, non-holonomic sailing, dynamics of moving continua, and stability of bicycles and walking robots. The book responds to a demand in the modern theory of nonconservative systems coming from the growing number of scientific and engineering disciplines including physics, fluid and solids mechanics, fluid-structure interactions, and modern multidisciplinary research areas such as biomechanics, micro- and nanomechanics, optomechanics, robotics, and material science. It is targeted at both young and experienced researchers and engineers working in fields associated with the dynamics of structures and materials. The book will help to get a comprehensive and systematic knowledge on the stability, bifurcations and dynamics of nonconservative systems and establish links between approaches and methods developed in different areas of mechanics and physics and modern applied mathematics.

Download or read book Micro Nano Chip Electrokinetics Volume III written by Xiangchun Xuan and published by MDPI. This book was released on 2021-02-24 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro/nanofluidics-based lab-on-a-chip devices have found extensive applications in the analysis of chemical and biological samples over the past two decades. Electrokinetics is the method of choice in these micro/nano-chips for transporting, manipulating, and sensing various analyte species (e.g., ions, molecules, fluids, and particles). This book aims to highlight the recent developments in the field of micro/nano-chip electrokinetics, ranging from the fundamentals of electrokinetics to the applications of electrokinetics to both chemo- and bio-sample handling.

Download or read book Bulk Crystal Growth of Electronic Optical and Optoelectronic Materials written by Peter Capper and published by John Wiley & Sons. This book was released on 2005-10-31 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable, timely book for the crystal growth community, edited by one of the most respected members in the field. Contents cover all the important materials from silicon through the III-V and II-IV compounds to oxides, nitrides, fluorides, carbides and diamonds International group of contributors from academia and industry provide a balanced treatment Includes global interest with particular relevance to: USA, Canada, UK, France, Germany, Netherlands, Belgium, Italy, Spain, Switzerland, Japan, Korea, Taiwan, China, Australia and South Africa

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific Computing in Electrical Engineering written by Ulrich Langer and published by Springer. This book was released on 2018-04-23 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of selected papers presented at the 11th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in St. Wolfgang, Austria, in 2016, showcases the state of the art in SCEE. The aim of the SCEE 2016 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, and to promote intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems. The focus in methodology was on model order reduction and uncertainty quantification. This extensive reference work is divided into six parts: Computational Electromagnetics, Circuit and Device Modeling and Simulation, Coupled Problems and Multi‐Scale Approaches in Space and Time, Mathematical and Computational Methods Including Uncertainty Quantification, Model Order Reduction, and Industrial Applications. Each part starts with a general introduction, followed by the respective contributions. This book will appeal to mathematicians and electrical engineers. Further, it introduces algorithm and program developers to recent advances in the other fields, while industry experts will be introduced to new programming tools and mathematical methods.