Download or read book Electro Chemical Discharge Machining ECDM of AL6061 SiC 10 MMC written by Chigal Gaurav and published by LAP Lambert Academic Publishing. This book was released on 2015-07-28 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: To successfully compete in today's global market, there is a dire need of rapid product development reducing the lead-time between the designs of the product to its arrival in the market. Engineering Composite Materials are gradually becoming very important material for their scope and use in advance manufacturing industries due to their high fatigue strength, thermal shock resistance, high strength to weight ratio etc. However machining of advance composites like Aluminium Matrix with Silicon Carbide reinforced particulates is very difficult by utilizing conventional machining method. Hence, it is essential for searching an advanced non-conventional machining method which may help to machining such composite. To meet the requirement of micro machining of such important material, it is essential to develop a new machining method. For effective machining of AL6061/SiC (10%) composite, an electrochemical discharge machining (ECDM) has been developed. The developed ECDM has been utilized to machine holes on AL6061/SiC (10%)-MMC and subsequently test results which are utilized to analyse the developed ECDM set up performance characteristic.
Download or read book Advances in Unconventional Machining and Composites written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-22 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Advances in Micro and Nano Manufacturing and Surface Engineering written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-30 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on micro and nano manufacturing and surface engineering which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers discuss the latest advances in miniature manufacturing, the machining of miniature components and features as well as improvement of surface properties. This volume will be of interest to academicians, researchers, and practicing engineers alike.
Download or read book Micro Electro Discharge Machining written by Ajay M. Sidpara and published by CRC Press. This book was released on 2019-08-20 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro Electro Discharge Machining (EDM) is a prominent technology for the fabrication of micro components in many fields. Nowadays, it is used like a conventional machine tool due to favorable characteristics. This book provides the fundamental knowledge of the principles of the process and its variants, the different process parameters, the role of machine components and systems, the challenges, and how to eliminate processing errors. It also includes real life applications of micro EDM in different areas with the most relevant examples.
Download or read book Advances in Manufacturing Technology written by Somashekhar S. Hiremath and published by Springer. This book was released on 2019-04-17 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented at the International Conference on Advances in Manufacturing Technology (ICAMT 2018). It includes contributions from different researchers and practitioners working in the field of advanced manufacturing technology. This book covers diverse topics of contemporary manufacturing technology including material processes, machine tools, cutting tools, robotics and automation, manufacturing systems, optimization technologies, 3D scanning and re-engineering, and 3D printing. Computer applications in design, analysis, and simulation tools for solving manufacturing problems at various levels starting from material designs to complex manufacturing systems are also discussed. This book will be useful for students, researchers, and practitioners working in the field of manufacturing technology.
Download or read book Advances in Materials and Manufacturing Engineering written by Leijun Li and published by Springer Nature. This book was released on 2020-01-09 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the International Conference on Advances in Materials and Manufacturing Engineering (ICAMME 2019), held at KIIT Deemed to be University, Bhubaneswar, India, from 15 to 17 March 2019. It covers theoretical and empirical developments in various areas of mechanical engineering, including manufacturing, production, machine design, fluid/thermal engineering, and materials.
Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.
Download or read book Advanced Modeling and Optimization of Manufacturing Processes written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2010-12-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Modeling and Optimization of Manufacturing Processes presents a comprehensive review of the latest international research and development trends in the modeling and optimization of manufacturing processes, with a focus on machining. It uses examples of various manufacturing processes to demonstrate advanced modeling and optimization techniques. Both basic and advanced concepts are presented for various manufacturing processes, mathematical models, traditional and non-traditional optimization techniques, and real case studies. The results of the application of the proposed methods are also covered and the book highlights the most useful modeling and optimization strategies for achieving best process performance. In addition to covering the advanced modeling, optimization and environmental aspects of machining processes, Advanced Modeling and Optimization of Manufacturing Processes also covers the latest technological advances, including rapid prototyping and tooling, micromachining, and nano-finishing. Advanced Modeling and Optimization of Manufacturing Processes is written for designers and manufacturing engineers who are responsible for the technical aspects of product realization, as it presents new models and optimization techniques to make their work easier, more efficient, and more effective. It is also a useful text for practitioners, researchers, and advanced students in mechanical, industrial, and manufacturing engineering.
Download or read book Advances in Machining of Composite Materials written by Islam Shyha and published by Springer Nature. This book was released on 2021-06-21 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of conventional and non-conventional machining processes of various composite materials, including polymer and metallic-based composites, nanostructured composites and green/natural composites. It presents state-of-the-art academic work and industrial developments in material fabrication, machining, modelling and applications, together with current practices and requirements for producing high-quality composite components. There are also dedicated chapters on physical properties and fabrication techniques of different composite material groups. The book also has chapters on health and safety considerations when machining composite materials and recycling composite materials. The contributors present machining composite materials in terms of operating conditions; cutting tools; appropriate machines; and typical damage patterns following machining operations. This book serves as a useful reference for manufacturing engineers, production supervisors, tooling engineers, planning and application engineers, and machine tool designers. It can also benefit final-year undergraduate and postgraduate students, as it provides comprehensive information on the machining of composite materials to produce high-quality final components. The book chapters were authored by experienced academics and researchers from four continents and nine countries including Canada, China, Egypt, India, Malaysia, Portugal, Singapore, United Kingdom and the USA.
Download or read book Advances in Engineering Design written by Pawan Kumar Rakesh and published by Springer Nature. This book was released on 2021-02-04 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the selected peer-reviewed proceedings of the International Conference on Innovative Engineering Design (ICOIED 2020). The contents provide a multidisciplinary approach for the development of innovative product design and their benefits for the society. The book presents latest advances in various fields like design process, service development, micro/nano technology, sensors and MEMS, and sustainability in engineering design. This book can be useful for students, researchers, and professionals interested in innovative product/process design and development.
Download or read book Biomanufacturing written by Chander Prakash and published by Springer. This book was released on 2019-03-20 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current Trends in Biomanufacturing focuses on cutting-edge research regarding the design, fabrication, assembly, and measurement of bio-elements into structures, devices, and systems. The field of biomaterial and biomanufacturing is growing exponentially in order to meet the increasing demands of for artificial joints, organs and bone-fixation devices. Rapid advances in the biological sciences and engineering are leading to newer and viable resources, methods and techniques that may providing better quality of life and more affordable health care services. The book covers the broad aspects of biomanufacturing, including: synthesis of biomaterials; implant coating techniques; spark plasma sintering; microwave processing; and cladding, powder metallurgy and electrospinning. The contributors illustrate the recent trends of biomanufacturing, highlighting the important aspects of biomaterial synthesis, and their use as feedstock of fabrication technologies and their characterization, along with their clinical practices. Current Trends in Biomanufacturing updates researchers and scientists the novelties and techniques of the field, as it summarises numerous aspects of biomanufacturing, including synthesis of biomaterials, fabrication of biomedical structures, their in-vivo/ in-vitro, mechanical analysis and associated ISO standards.
Download or read book Modern Machining Technology written by Bijoy Bhattacharyya and published by Academic Press. This book was released on 2019-09-17 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Machining Technology: Advanced, Hybrid, Micro Machining and Super Finishing Technology explores complex and precise components with challenging shapes that are increasing in demand in industry. As the first book to cover all major technologies in this field, readers will find the latest technical developments and research in one place, allowing for easy comparison of specifications. Technologies covered include mechanical, thermal, chemical, micro and hybrid machining processes, as well as the latest advanced finishing technologies. Each topic is accompanied by a basic overview, examples of typical applications and studies of performance criteria. In addition, readers will find comparative advantages, model questions and solutions. - Addresses a broad range of modern machining techniques, providing specifications for easy comparison - Includes descriptions of the main applications for each method, along with the materials or products needed - Provides the very latest research in processes, including hybrid machining
Download or read book Advances in Manufacturing Processes written by K. S. Vijay Sekar and published by . This book was released on 2019 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the International Conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM 2018). It discusses innovative manufacturing processes, such as rapid prototyping, nontraditional machining, advanced computer numerical control (CNC) machining, and advanced metal forming. The book particularly focuses on finite element simulation and optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike.
Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.
Download or read book Recent Trends in Nanomaterials written by Zishan Husain Khan and published by Springer. This book was released on 2017-07-20 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest advances in the field of nanomaterials synthesis and processes, and provides a comprehensive overview of the state of art of research in this rapidly developing field. The book is divided into 11 chapters on various aspects of nanomaterials, moving from the synthesis and characterization of graphene oxide to graphene quantum dots and other interesting nanomaterials. Some chapters based on theoretical simulation of nanomaterials and their properties and applications of nanomaterials have also presented in this book. Given the depth and breadth of coverage, the book offers a valuable guide for researchers and students working in the area of nanomaterials.
Download or read book Machining written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2008-07-11 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining is one of the most important manufacturing processes. Parts manufactured by other processes often require further operations before the product is ready for application. “Machining: Fundamentals and Recent Advances” is divided into two parts. Part I explains the fundamentals of machining, with special emphasis on three important aspects: mechanics of machining, tools, and work-piece integrity. Part II is dedicated to recent advances in machining, including: machining of hard materials, machining of metal matrix composites, drilling polymeric matrix composites, ecological machining (minimal quantity of lubrication), high-speed machining (sculptured surfaces), grinding technology and new grinding wheels, micro- and nano-machining, non-traditional machining processes, and intelligent machining (computational methods and optimization). Advanced students, researchers and professionals interested or involved in modern manufacturing engineering will find the book a useful reference.
Download or read book Principles of Engineering Manufacture written by V. Chiles and published by Butterworth-Heinemann. This book was released on 1996-02-02 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this text, formerly known as Principles of Engineering Production, has been thoroughly revised and updated and continues to provide students with a comprehensive overview of the technical considerations for the entire manufacturing process. In keeping with the developments in manufacturing technology, this new edition reflects the major advances in recent years, in particular, looking at the transition to computer controlled machinery and the developments in computer applications.Beginning with specification and standardisation, it analyses the key aspects of the manufacturing process and pays particular attention to the crucial considerations of quality and cost. In addition, the coverage of materials has been extended to account for the increased availability and complexity of non-metals. The addition of a number of case studies, new worked examples and problems, make this text an invaluable introduction to engineering manufacture. It is also a useful and straightforward reference text for the professional engineer.
