EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Electrical   Electronics Abstracts

Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Power System Harmonics

Download or read book Power System Harmonics written by Jos Arrillaga and published by John Wiley & Sons. This book was released on 2004-06-25 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Harmonic distortion problems include equipment overheating, motor failures, capacitor failure and inaccurate power metering. The topic of power system harmonics was covered for the first time 20 years ago and the first edition has become a standard reference work in this area. Unprecedented developments in power electronic devices and their integration at all levels in the power system require a new look at the causes and effects of these problems, and the state of hardware and software available for harmonic assessment. Following the successful first edition, this second edition of Power System Harmonics maintains the practical approach to the subject and discusses the impact of advanced power electronic technology on instrumentation, simulation, standards and active harmonic elimination techniques. Features include: A new chapter on modern digital instrumentation techniques. Added sections on active filters and modern distorting devices such as FACTS devices, multilevel conversion, current source, voltage source inverters and turn-OFF-related power electronic devices. References to international standards for harmonics and inter-harmonics. Numerical examples of technique application. Offering a comprehensive understanding of power systems, this book is an asset to power engineers involved in the planning, design and operation of power system generation, transmission and distribution. Researchers and postgraduate students in the field will also benefit from this useful reference.

Book Conference Papers from the Summer Meeting

Download or read book Conference Papers from the Summer Meeting written by IEEE Power Engineering Society and published by . This book was released on 2000 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book CIRED

Download or read book CIRED written by and published by . This book was released on 1997 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Direct Current Transmission

Download or read book Direct Current Transmission written by Edward Wilson Kimbark and published by Wiley-Interscience. This book was released on 1971-09-10 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants

Download or read book IEEE Recommended Practice for Electric Power Distribution for Industrial Plants written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1994 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough analysis of basic electrical-systems considerations is presented. Guidance is provided in design, construction, and continuity of an overall system to achieve safety of life and preservation of property; reliability; simplicity of operation; voltage regulation in the utilization of equipment within the tolerance limits under all load conditions; care and maintenance; and flexibility to permit development and expansion. Recommendations are made regarding system planning; voltage considerations; surge voltage protection; system protective devices; fault calculations; grounding; power switching, transformation, and motor-control apparatus; instruments and meters; cable systems; busways; electrical energy conservation; and cost estimation.

Book Broadband Dielectric Spectroscopy

Download or read book Broadband Dielectric Spectroscopy written by Friedrich Kremer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both an introductory course to broadband dielectric spectroscopy and a monograph describing recent dielectric contributions to current topics, this book is the first to cover the topic and has been hotly awaited by the scientific community.

Book Computational Studies of Human Motion

Download or read book Computational Studies of Human Motion written by David Forsyth and published by Now Publishers Inc. This book was released on 2006 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Studies of Human Motion: Part 1, Tracking and Motion Synthesis reviews methods for kinematic tracking of the human body in video. The review confines itself to the earlier stages of motion, focusing on tracking and motion synthesis. There is an extensive discussion of open issues. The authors identify some puzzling phenomena associated with the choice of human motion representation --- joint angles vs. joint positions. The review concludes with a quick guide to resources and an extensive bibliography of over 400 references. Computational Studies of Human Motion: Part 1, Tracking and Motion Synthesis is an invaluable reference for those engaged in computational geometry, computer graphics, image processing, imaging in general, and robotic.

Book eIoT

    Book Details:
  • Author : Steffi O. Muhanji
  • Publisher : Springer
  • Release : 2019-02-20
  • ISBN : 3030104273
  • Pages : 181 pages

Download or read book eIoT written by Steffi O. Muhanji and published by Springer. This book was released on 2019-02-20 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book explores the collision between the sustainable energy transition and the Internet of Things (IoT). In that regard, this book’s arrival is timely. Not only is the Internet of Things for energy applications, herein called the energy Internet of Things (eIoT), rapidly developing but also the transition towards sustainable energy to abate global climate is very much at the forefront of public discourse. It is within the context of these two dynamic thrusts, digitization and global climate change, that the energy industry sees itself undergoing significant change in how it is operated and managed. This book recognizes that they impose five fundamental energy management change drivers: 1.) the growing demand for electricity, 2.) the emergence of renewable energy resources, 3.) the emergence of electrified transportation, 4.) the deregulation of electric power markets, 5.) and innovations in smart grid technology. Together, they challenge many of the assumptions upon which the electric grid was first built. The goal of this book is to provide a single integrated picture of how eIoT can come to transform our energy infrastructure. This book links the energy management change drivers mentioned above to the need for a technical energy management solution. It, then, describes how eIoT meets many of the criteria required for such a technical solution. In that regard, the book stresses the ability of eIoT to add sensing, decision-making, and actuation capabilities to millions or perhaps even billions of interacting “smart" devices. With such a large scale transformation composed of so many independent actions, the book also organizes the discussion into a single multi-layer energy management control loop structure. Consequently, much attention is given to not just network-enabled physical devices but also communication networks, distributed control & decision making, and finally technical architectures and standards. Having gone into the detail of these many simultaneously developing technologies, the book returns to how these technologies when integrated form new applications for transactive energy. In that regard, it highlights several eIoT-enabled energy management use cases that fundamentally change the relationship between end users, utilities, and grid operators. Consequently, the book discusses some of the emerging applications for utilities, industry, commerce, and residences. The book concludes that these eIoT applications will transform today’s grid into one that is much more responsive, dynamic, adaptive and flexible. It also concludes that this transformation will bring about new challenges and opportunities for the cyber-physical-economic performance of the grid and the business models of its increasingly growing number of participants and stakeholders.

Book Proceedings of International Conference on Intelligent Computing  Information and Control Systems

Download or read book Proceedings of International Conference on Intelligent Computing Information and Control Systems written by A. Pasumpon Pandian and published by Springer Nature. This book was released on 2021-01-24 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers presented at the International Conference on Intelligent Computing, Information and Control Systems (ICICCS 2020). It encompasses various research works that help to develop and advance the next-generation intelligent computing and control systems. The book integrates the computational intelligence and intelligent control systems to provide a powerful methodology for a wide range of data analytics issues in industries and societal applications. The book also presents the new algorithms and methodologies for promoting advances in common intelligent computing and control methodologies including evolutionary computation, artificial life, virtual infrastructures, fuzzy logic, artificial immune systems, neural networks and various neuro-hybrid methodologies. This book is pragmatic for researchers, academicians and students dealing with mathematically intransigent problems.

Book Grid Converters for Photovoltaic and Wind Power Systems

Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Book Energy from the Desert  Practical Proposals for Very Large Scale Photovoltaic Systems

Download or read book Energy from the Desert Practical Proposals for Very Large Scale Photovoltaic Systems written by Kosuke Kurokawa and published by Earthscan. This book was released on 2012-05-04 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's deserts are sufficiently large that, in theory, covering a fraction of their landmass with PV systems could generate many times the current primary global energy supply. In three parts, this study details the background and concept of VLS-PV, maps out a development path towards the realization of VLS-PV systems and provides firm recommendations to achieve long-term targets. This represents the first study to provide a concrete set of answers to the questions that must be addressed in order to secure and exploit the potential for VLS-PV technology and its global benefits.

Book Advances in Wind Power

Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.

Book Wind Power in Power Systems

Download or read book Wind Power in Power Systems written by Thomas Ackermann and published by John Wiley & Sons. This book was released on 2012-04-23 with total page 1132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the highly acclaimed Wind Power in Power Systems has been thoroughly revised and expanded to reflect the latest challenges associated with increasing wind power penetration levels. Since its first release, practical experiences with high wind power penetration levels have significantly increased. This book presents an overview of the lessons learned in integrating wind power into power systems and provides an outlook of the relevant issues and solutions to allow even higher wind power penetration levels. This includes the development of standard wind turbine simulation models. This extensive update has 23 brand new chapters in cutting-edge areas including offshore wind farms and storage options, performance validation and certification for grid codes, and the provision of reactive power and voltage control from wind power plants. Key features: Offers an international perspective on integrating a high penetration of wind power into the power system, from basic network interconnection to industry deregulation; Outlines the methodology and results of European and North American large-scale grid integration studies; Extensive practical experience from wind power and power system experts and transmission systems operators in Germany, Denmark, Spain, UK, Ireland, USA, China and New Zealand; Presents various wind turbine designs from the electrical perspective and models for their simulation, and discusses industry standards and world-wide grid codes, along with power quality issues; Considers concepts to increase penetration of wind power in power systems, from wind turbine, power plant and power system redesign to smart grid and storage solutions. Carefully edited for a highly coherent structure, this work remains an essential reference for power system engineers, transmission and distribution network operator and planner, wind turbine designers, wind project developers and wind energy consultants dealing with the integration of wind power into the distribution or transmission network. Up-to-date and comprehensive, it is also useful for graduate students, researchers, regulation authorities, and policy makers who work in the area of wind power and need to understand the relevant power system integration issues.

Book Flexible Power Transmission

Download or read book Flexible Power Transmission written by Jos Arrillaga and published by John Wiley & Sons. This book was released on 2007-09-27 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of power semiconductors with greater ratings and improved characteristics has meant that the power industry has become more willing to develop new converter configurations. These new configurations take advantage of the higher controllability and switching frequencies of the new devices. The next few years will decide which of the proposed technologies will dominate future power transmission systems. Flexible Power Transmission is a comprehensive guide to the high voltage direct current (HVDC) options available, helping the reader to make informed decisions for designing future power transmission systems. The book includes: a full description of the principles and components in existing converter technology, as well as alternative proposals for self-commutating conversion; A review of the state of power semiconductors suited to HVDC transmission and present proposals for multi-level HVDC transmission. a detailed overview of the flexible HVDC methods for improving controllability and increasing power transfer capability in electrical power systems. up-to-date information on thyrisistor-based HVDC technology. coverage of new pulse width modulation (PWM) transmission technology and multi-level voltage source conversion (VSC) and current source conversion (CSC). An excellent reference for professional power engineers, Flexible Power Transmission is also a useful guide for power system researchers as well as lecturers and students in power systems and power electronics disciplines.

Book Logistics 4 0

Download or read book Logistics 4 0 written by Turan Paksoy and published by CRC Press. This book was released on 2020-12-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial revolutions have impacted both, manufacturing and service. From the steam engine to digital automated production, the industrial revolutions have conduced significant changes in operations and supply chain management (SCM) processes. Swift changes in manufacturing and service systems have led to phenomenal improvements in productivity. The fast-paced environment brings new challenges and opportunities for the companies that are associated with the adaptation to the new concepts such as Internet of Things (IoT) and Cyber Physical Systems, artificial intelligence (AI), robotics, cyber security, data analytics, block chain and cloud technology. These emerging technologies facilitated and expedited the birth of Logistics 4.0. Industrial Revolution 4.0 initiatives in SCM has attracted stakeholders’ attentions due to it is ability to empower using a set of technologies together that helps to execute more efficient production and distribution systems. This initiative has been called Logistics 4.0 of the fourth Industrial Revolution in SCM due to its high potential. Connecting entities, machines, physical items and enterprise resources to each other by using sensors, devices and the internet along the supply chains are the main attributes of Logistics 4.0. IoT enables customers to make more suitable and valuable decisions due to the data-driven structure of the Industry 4.0 paradigm. Besides that, the system’s ability of gathering and analyzing information about the environment at any given time and adapting itself to the rapid changes add significant value to the SCM processes. In this peer-reviewed book, experts from all over the world, in the field present a conceptual framework for Logistics 4.0 and provide examples for usage of Industry 4.0 tools in SCM. This book is a work that will be beneficial for both practitioners and students and academicians, as it covers the theoretical framework, on the one hand, and includes examples of practice and real world.