Download or read book Electrical Machines written by S. K. Sahdev and published by Cambridge University Press. This book was released on 2017-11-24 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers key concepts of electrical machines embedded with solved examples, review questions, illustrations and open book questions.

Download or read book Electrical Machines and Drives written by Jan A. Melkebeek and published by Springer. This book was released on 2018-01-20 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paid to PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor’s and Master’s programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course ’Fundamentals of Electric Drives’ in the third bachelor. Part 3 is used for the course ’Controlled Electrical Drives’ in the first master, while Part 4 is used in the specialised master on electrical energy.

Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.

Download or read book Electrical Machines I written by P.S. Bimbhra, G.C. Garg and published by KHANNA PUBLISHING HOUSE. This book was released on with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written so that it serves as a text book for B.E./B.Tech degree students in general and for the institutions where AICTE model curriculum has been adopted. TOPICS COVERED IN THIS BOOK:- Magnetic field and Magnetic circuit Electromagnetic force and torque D.C. Machines D.C. Machines-Motoring and Generation SALIENT FEATURES:- Self-contained, self-explantary and simple to follow text. Numerous worked out examples. Well Explained theory parts with illustrations. Exercises, objective type question with answers at the end of each chapter.

Download or read book Basic Electric Machines written by Vincent Del Toro and published by . This book was released on 1990 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: For core courses in Electric Machinery. Focuses on all aspects of steady-state performance, control and applications. (vs. Fitzgerald, Chapman, Nasar, Lindsay/Rashid).

Download or read book Fundamentals of Electric Machines A Primer with MATLAB written by Warsame Hassan Ali and published by CRC Press. This book was released on 2019-06-12 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: An electric machine is a device that converts mechanical energy into electrical energy or vice versa. It can take the form of an electric generator, electric motor, or transformer. Electric generators produce virtually all electric power we use all over the world. Electric machine blends the three major areas of electrical engineering: power, control and power electronics. This book presents the relation of power quantities for the machine as the current, voltage power flow, power losses, and efficiency. This book will provide a good understanding of the behavior and its drive, beginning with the study of salient features of electrical dc and ac machines.

Download or read book Design of Small Electrical Machines written by Essam S. Hamdi and published by . This book was released on 1994-11-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing electrical machines requires multi-disciplinary skills. Engineers must not only be expert in electromagnetic design, but also in selecting materials and choosing production techniques. Employing a range of examples, the author covers various design procedures from specification to performance prediction. Featuring: Selection and specification of components and materials Production techniques Focus on both the electrical and mechanical construction aspects Introduction to CAD Detailed exploration of thermal design Unified approach to permanent magnet and wound-field d.c. motor design Design of 50 Hz and 400 Hz induction motors Typical designs This timely book highlights the latest advances in design techniques and materials. By presenting a self-contained and unified treatment, it will prove invaluable to both professional engineers and senior students.

Download or read book Electromagnetics for Electrical Machines written by Saurabh Kumar Mukerji and published by CRC Press. This book was released on 2018-10-08 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetics for Electrical Machines offers a comprehensive yet accessible treatment of the linear theory of electromagnetics and its application to the design of electrical machines. Leveraging valuable classroom insight gained by the authors during their impressive and ongoing teaching careers, this text emphasizes concepts rather than numerical methods, providing presentation/project problems at the end of each chapter to enhance subject knowledge. Highlighting the essence of electromagnetic field (EMF) theory and its correlation with electrical machines, this book: Reviews Maxwell’s equations and scalar and vector potentials Describes the special cases leading to the Laplace, Poisson’s, eddy current, and wave equations Explores the utility of the uniqueness, generalized Poynting, Helmholtz, and approximation theorems Discusses the Schwarz–Christoffel transformation, as well as the determination of airgap permeance Addresses the skin effects in circular conductors and eddy currents in solid and laminated iron cores Contains examples relating to the slot leakage inductance of rotating electrical machines, transformer leakage inductance, and theory of hysteresis machines Presents analyses of EMFs in laminated-rotor induction machines, three-dimensional field analyses for three-phase solid rotor induction machines, and more Electromagnetics for Electrical Machines makes an ideal text for postgraduate-level students of electrical engineering, as well as of physics and electronics and communication engineering. It is also a useful reference for research scholars concerned with problems involving electromagnetics.

Download or read book SPECIAL ELECTRICAL MACHINES written by E.G. JANARDANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2014-01-01 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the complete syllabi prescribed for undergraduate courses in electrical, electronics, mechanical and instrumentation engineering offered by various Indian universities. The objective of this text is to provide thorough knowledge in the emerging field of special electrical machines. It discusses the stepper motor, switched reluctance motor, permanent magnet dc and ac motors, brushless dc motors, single phase special electric motors, servomotors, linear electric machines and permanent magnet axial flux machines. Key Features • Chapter on permanent magnet axial flux machines (not available in other Indian authors' books) • Numerous worked-out examples • Based on classroom tested materials • Simplified mathematical analysis Besides undergraduate students, the book will also be useful to the postgraduate students specialising in drives and control, power electronics, control systems and mechatronics.

Download or read book Electric Machines and Power Systems written by Vincent Del Toro and published by Prentice Hall. This book was released on 1985 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Multiphysics Simulation by Design for Electrical Machines Power Electronics and Drives written by Marius Rosu and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.

Download or read book Electrical Machines Drives and Power Systems written by Theodore Wildi and published by Pearson Educación. This book was released on 2006 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The HVDC Light[trademark] method of transmitting electric power. Introduces students to an important new way of carrying power to remote locations. Revised, reformatted Instructor's Manual. Provides instructors with a tool that is much easier to read. Clear, practical approach.

Download or read book Advancements in Electric Machines written by J. F. Gieras and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, electrical machines are classi?ed into d. c. commutator (brushed) machines, induction (asynchronous) machines and synchronous machines. These three types of electrical machines are still regarded in many academic curricula as fundamental types, despite that d. c. brushed machines (except small machines) have been gradually abandoned and PM brushless machines (PMBM) and switched reluctance machines (SRM) have been in mass p- duction and use for at least two decades. Recently, new topologies of high torque density motors, high speed motors, integrated motor drives and special motors have been developed. Progress in electric machines technology is stimulated by new materials, new areas of applications, impact of power electronics, need for energy saving and new technological challenges. The development of electric machines in the next few years will mostly be stimulated by computer hardware, residential and public applications and transportation systems (land, sea and air). At many Universities teaching and research strategy oriented towards el- trical machinery is not up to date and has not been changed in some co- tries almost since the end of the WWII. In spite of many excellent academic research achievements, the academia–industry collaboration and technology transfer are underestimated or, quite often, neglected. Underestimation of the role of industry, unfamiliarity with new trends and restraint from technology transfer results, with time, in lack of external ?nancial support and drastic - cline in the number of students interested in Power Electrical Engineering.

Download or read book Electrical Machines written by Dieter Gerling and published by Springer Science & Business Media. This book was released on 2014-09-17 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Machines and Drives play a vital role in industry with an ever increasing importance. This fact necessitates the understanding of machine and drive principles by engineers of many different disciplines. Therefore, this book is intended to give a comprehensive deduction of these principles. Special attention is given to the precise mathematical deduction of the necessary formulae to calculate machines and drives, and to the discussion of simplifications (if applied) with the associated limits. So the book shows how the different machine topologies can be deduced from general fundamentals, and how they are linked. This book addresses graduate students, researchers and developers of Electrical Machines and Drives, who are interested in getting knowledge about the principles of machine and drive operation and in detecting the mathematical and engineering specialties of the different machine and drive topologies together with their mutual links. The detailed, but compact mathematical deduction, together with a distinct emphasis onto assumptions, simplifications and the associated limits, leads to a clear understanding of Electrical Machine and Drive topologies and characteristics.

Download or read book Principles of Electric Machines and Power Electronics written by P. C. Sen and published by . This book was released on 1989-01-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible introduction to all important aspects of electric machines, covering dc, induction, and synchronous machines. Also addresses modern techniques of control, power electronics, and applications. Exposition builds from first principles, making this book accessible to a wide audience. Contains a large number of problems and worked examples.

Download or read book Schaum s Outline of Theory and Problems of Electric Machines and Electromechanics written by S. A. Nasar and published by McGraw-Hill Companies. This book was released on 1981 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Machines written by Charles Seymour Siskind and published by McGraw-Hill/Glencoe. This book was released on 1959 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: