Download or read book Electrical Insulation and Dielectric Phenomena 2007 CEIDP 2007 Annual Report Conference on written by and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Crosslinkable Polyethylene written by Jince Thomas and published by Springer Nature. This book was released on 2021-05-03 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume covers various aspects of cross-linked polyethylene (XLPE). The contents include manufacture, morphology, structure, properties, applications, early stage development, cross-linking techniques, recycling process, physical and chemical properties as well as the scope and future aspects of XLPE. It focuses on the life cycle analysis of XLPE and their industrial applications and commercial importance. This book will be of use to academic and industry researchers, as well as graduate students working in the fields of polymer science and engineering, materials science, and chemical engineering.

Download or read book Practical Partial Discharge Measurement on Electrical Equipment written by Greg C. Stone and published by John Wiley & Sons. This book was released on 2023-08-28 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Partial Discharge Measurement on Electrical Equipment Accessible reference dealing with (partial discharge) PD measurement in all types of high voltage equipment using modern digital PD detectors Practical Partial Discharge Measurement on Electrical Equipment is a timely update in the field of partial discharges (PD), covering both holistic concepts and specific modern applications in one volume. The first half of the book educates the reader on what PD is and the general principles of how it is measured and interpreted. The second half of the book is similar to a handbook, with a chapter devoted to PD measurements in each type of high voltage (HV) equipment. These chapters contain specific information of the insulation system design, causes of PD in that equipment, off-line and on-line measurement methods, interpretation methods, and relevant standards. The work is authored by four well-known experts in the field of PD measurement who have published hundreds of technical papers on the subject and performed thousands of PD measurements on all the different types of HV equipment covered in the book. The authors have also had relationships with PD detector manufacturers, giving them key insights into test instruments and practical measurements. Sample topics covered in the work include: Physics of PD, discharge phenomena (contact sparking and vibration sparking), and an introduction to PD measurement (electrical, optical, acoustic, and chemical) Electrical PD detection (types of sensors), RF PD detection (antenna, TEV), and PD instrumentation and display Off-line and on-line PD measurements, general principles of PD interpretation, and laboratory PD testing of lumped test objects PD in different types of HV equipment (power cables, power transformers, air insulated metal-clad switchgear, rotating machines, gas-insulated switchgear, and more) For HV equipment OEMs, users of HV equipment, or employees of companies that provide PD testing services to clients, Practical Partial Discharge Measurement on Electrical Equipment is an essential reference to help understand general concepts about the topic and receive expert guidance during specific practical applications.

Download or read book Design and Investment of High Voltage NanoDielectrics written by Mohamed, Ahmed Thabet and published by IGI Global. This book was released on 2020-08-21 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology has emerged as a trending research area as its industrial uses continue to multiply. Some specific areas that have benefited from the dynamic properties of nanomaterials are high voltage electronics and electrical engineering. Nanoparticles have created new avenues for engineers to explore within these fields; however, significant research on this subject is lacking. Design and Investment of High Voltage NanoDielectrics is a collection of innovative research on the methods and application of nanoparticles in high voltage insulations and dielectric properties. This book discusses the wide array of uses nanoparticles have within high voltage electrics engineering and the diverse polymeric properties that nanomaterials help make prevalent. While highlighting topics including electrical degradation, magnetic materials, and fundamental polymers, this book is ideally designed for researchers, engineers, industry professionals, practitioners, scientists, managers, manufacturers, analysts, students, and educators seeking current research on the dielectric properties of modern nanocomposite materials.

Download or read book Dielectrics in Electric Fields written by Gorur Govinda Raju and published by CRC Press. This book was released on 2017-07-28 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectrics in Electric Fields explores the influence of electric fields on dielectric—i.e., non-conducting or insulating—materials, examining the distinctive behaviors of these materials through well-established principles of physics and engineering. Featuring five new chapters, nearly 200 new figures, and more than 800 new citations, this fully updated and significantly expanded Second Edition: Analyzes inorganic substances with real-life applications in harsh working conditions such as outdoor, nuclear, and space environments Introduces methods for measuring dielectric properties at microwave frequencies, presenting results obtained for specific materials Discusses the application of dielectric theory in allied fields such as corrosion studies, civil engineering, and health sciences Combines in one chapter coverage of electrical breakdown in gases with breakdown in micrometric gaps Offers extensive coverage of electron energy distribution—essential knowledge required for the application of plasma sciences in medical science Delivers a detailed review of breakdown in liquids, along with an overview of electron mobility, providing a clear understanding of breakdown phenomena Explains breakdown in solid dielectrics such as single crystals, polycrystalline and amorphous states, thin films, and powders compressed to form pellets Addresses the latest advances in dielectric theory and research, including cutting-edge nanodielectric materials and their practical applications Blends early classical papers that laid the foundation for much of the dielectric theory with more recent work The author has drawn from more than 55 years of research studies and experience in the areas of high-voltage engineering, power systems, and dielectric materials and systems to supply both aspiring and practicing engineers with a comprehensive, authoritative source for up-to-date information on dielectrics in electric fields.

Download or read book Proceedings of Third International Conference on Communication Computing and Electronics Systems written by V. Bindhu and published by Springer Nature. This book was released on 2022-03-19 with total page 1111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes high quality research papers presented at the International Conference on Communication, Computing and Electronics Systems 2021, held at the PPG Institute of Technology, Coimbatore, India, on 28-29 October 2021. The volume focuses mainly on the research trends in cloud computing, mobile computing, artificial intelligence and advanced electronics systems. The topics covered are automation, VLSI, embedded systems, optical communication, RF communication, microwave engineering, artificial intelligence, deep learning, pattern recognition, communication networks, Internet of Things, cyber-physical systems, and healthcare informatics.

Download or read book Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems written by U. Mohan Rao and published by John Wiley & Sons. This book was released on 2021-12-21 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference and guide on the usage of the alternative dielectric fluids for transformer insulation systems Liquid-filled transformers are one of the most important and expensive components involved in the transmission and distribution of power to industrial and domestic loads. Although petroleum-based insulating oils have been used in transformers for decades, recent environmental concerns, health and safety considerations, and various technical factors have increased the need for new alternative and biodegradable liquids. Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems is an up-to-date reference and guide on natural and synthetic ester-based biodegradable insulating liquids. Covering the operational behavior, performance analysis, and maintenance of transformers filled with biodegradable insulating liquids, this comprehensive resource helps researchers and utility engineers expand their knowledge of the benefits, challenges, and application of ester-filled transformers. In-depth chapters written by experienced researchers addresses critical topics including transformer condition monitoring, high voltage insulation testing, biodegradable insulating material processing and evaluation, and more. A unique and significant contribution to existing literature on the subject, this authoritative volume: • Covers condition monitoring, diagnostic testing, applications, maintenance, and in-service experiences • Explores current challenges and future prospects of ester-filled transformers • Discusses significant research progress and identifies the topics in need of further emphasis • Compares the differences and similarities between mineral oils and ester liquids • Includes in-depth behavioral observations and performance analysis of ester-based insulating liquids Alternative Liquid Dielectrics for High Voltage Transformer Insulation Systems: Performance Analysis and Applications is a must-have reference for utility engineers, electrical power utilities, transformer owners, manufacturers, and researchers.

Download or read book Nanoparticle Reinforced Polymers written by Ana María Díez-Pascual and published by MDPI. This book was released on 2019-07-23 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, a collection of 12 original contributions and 4 reviews, provides a selection of the most recent advances in the preparation, characterization, and applications of polymeric nanocomposites comprising nanoparticles. The concept of nanoparticle-reinforced polymers came about three decades ago, following the outstanding discovery of fullerenes and carbon nanotubes. One of the main ideas behind this approach is to improve the matrix mechanical performance. The nanoparticles exhibit higher specific surface area, surface energy, and density compared to microparticles and, hence, lower nanofiller concentrations are needed to attain properties comparable to, or even better than, those obtained by conventional microfiller loadings, which facilitates processing and minimizes the increase in composite weight. The addition of nanoparticles into different polymer matrices opens up an important research area in the field of composite materials. Moreover, many different types of inorganic nanoparticles, such as quantum dots, metal oxides, and ceramic and metallic nanoparticles, have been incorporated into polymers for their application in a wide range of fields, ranging from medicine to photovoltaics, packaging, and structural applications.

Download or read book Emerging Nanotechnology Applications in Electrical Engineering written by Mohamed, Ahmed Thabet and published by IGI Global. This book was released on 2021-06-25 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The energy sector continues to receive increased attention from both consumers and producers due to its impact on all aspects of life. Electrical energy especially has become more in demand because of the delivery of the service to a large percentage of consumers in addition to the progress and increase of industrial production. It is thus necessary to find advanced systems capable of transferring huge amounts of electrical energy efficiently and safely. Nanotechnology aims to develop new types of atomic electronics that adopt quantum mechanics and the movement of individual particles to produce equipment faster and smaller and solve problems attributed to the electrical engineering field. Emerging Nanotechnology Applications in Electrical Engineering contains innovative research on the methods and applications of nanoparticles in electrical engineering. This book discusses the wide array of uses nanoparticles have within electrical engineering and the diverse electric and magnetic properties that nanomaterials help make prevalent. While highlighting topics including electrical applications, magnetic applications, and electronic applications, this book is ideally designed for researchers, engineers, industry professionals, practitioners, scientists, managers, manufacturers, analysts, students, and educators seeking current research on nanotechnology in electrical, electronic, and industrial applications.

Download or read book Polymer and Ceramic Composite Materials written by Noureddine Ramdani and published by CRC Press. This book was released on 2019-02-07 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes recent advances in the fabrication methods, properties, and applications of various ceramic-filled polymer matrix composites. Surface-modification methods and chemical functionalization of the ceramic fillers are explored in detail, and the outstanding thermal and mechanical properties of polymer–ceramic composites, the modeling of some of their thermal and mechanical parameters, and their major potential applications are discussed along with detailed examples. Aimed at researchers, industry professionals, and advanced students working in materials science and engineering, this work offering a review of a vast number of references in the polymer–ceramic field, this work helps readers easily advance their research and understanding of the field.

Download or read book 21st Century Nanoscience A Handbook written by Klaus D. Sattler and published by CRC Press. This book was released on 2020-04-22 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 21st Century Nanoscience Handbook will be the most comprehensive, up-to-date large reference work for the field of nanoscience. Handbook of Nanophysics by the same editor published in the fall of 2010 and was embraced as the first comprehensive reference to consider both fundamental and applied aspects of nanophysics. This follow-up project has been conceived as a necessary expansion and full update that considers the significant advances made in the field since 2010. It goes well beyond the physics as warranted by recent developments in the field. This ninth volume in a ten-volume set covers industiral applications. Key Features: Provides the most comprehensive, up-to-date large reference work for the field. Chapters written by international experts in the field. Emphasises presentation and real results and applications. This handbook distinguishes itself from other works by its breadth of coverage, readability and timely topics. The intended readership is very broad, from students and instructors to engineers, physicists, chemists, biologists, biomedical researchers, industry professionals, governmental scientists, and others whose work is impacted by nanotechnology. It will be an indispensable resource in academic, government, and industry libraries worldwide. The fields impacted by nanophysics extend from materials science and engineering to biotechnology, biomedical engineering, medicine, electrical engineering, pharmaceutical science, computer technology, aerospace engineering, mechanical engineering, food science, and beyond.

Download or read book Crosslinkable Polyethylene Based Blends and Nanocomposites written by Jince Thomas and published by Springer Nature. This book was released on 2021-04-19 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume serves as a cutting edge reference on XLPE based blends, nanocomposites, and their applications. The book provides an introduction to XLPE nanocomposites and discusses the incorporation of natural and inorganic nanoparticles in the XLPE matrix. It also focuses on its characterization as well as the morphological, rheological, mechanical, viscoelastic, thermal, and electrical, properties. It provides an in-depth review of various potential applications, with special emphasis on use in cable insulation. The book focuses on cutting edge research developments, looking at published papers, patents, and production data. This book will be of use to academic and industry researchers, as well as graduate students working in the fields of polymer science and engineering, materials science, and chemical engineering.

Download or read book Polyimide for Electronic and Electrical Engineering Applications written by Sombel Diaham and published by BoD – Books on Demand. This book was released on 2021-05-05 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyimide is one of the most efficient polymers in many industries for its excellent thermal, electrical, mechanical, and chemical properties as well as its easy processability. In the electronic and electrical engineering industries, polyimide has widely been used for decades thanks to its very good dielectric and insulating properties at the high electric field and at high temperatures of around 200°C in long term-service. Moreover, polyimide appears essential for the development of new electronic devices where further considerations such as high power density, integration, higher temperature, thermal conduction management, energy storage, reliability, or flexibility are required in order to sustain the growing global electrical energy consumption. This book gathers interdisciplinary chapters on polyimide in various topics through state-of-the-art and original ongoing research.

Download or read book Polymer Dielectrics written by Boxue Du and published by BoD – Books on Demand. This book was released on 2017-05-11 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives the reader an overview on electrical properties and applications such as converter transformer, transistor, and energy storage. Besides, this book also presents some recent researches on typical polymer material such as silicon rubber and LDPE, which may provide some clues of advanced polymer properties for both engineers and researches. The author has been a professor at the Department of Electrical Engineering, School of Electrical Engineering and Automation, Tianjin University, China, since 2002. He has been active in polymer insulation research since the 1990s. He is a member of IEEJ, senior member of CSEE, member at several WG in CIGRE, and associate editor of the IEEE Transactions on Dielectrics and Electrical Insulation.

Download or read book Engineering Dielectric Liquid Applications written by Issouf Fofana, Ph.D. ing. Chairholder and published by MDPI. This book was released on 2018-12-11 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Engineering Dielectric Liquid Applications" that was published in Energies

Download or read book Power Transformer Diagnostics Monitoring and Design Features written by Issouf Fofana, Ph.D. ing. Chairholder and published by MDPI. This book was released on 2019-01-09 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Power Transformer Diagnostics, Monitoring and Design Features" that was published in Energies

Download or read book Carbon The Next Silicon written by Marc J. Madou and published by Momentum Press. This book was released on 2016-01-12 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Magnetic Resonance (NMR) and Electron Spin Resonance (ESR) spectroscopies are well-known characterization techniques that reveal the molecular details of a sample non-invasively. The authors discuss how NMR can provide useful information on the microstructure of carbon and its surface properties and explain how C-MEMS/C-NEMS technology can be explored for building improved NMR microdevices. The authors highlight the manipulation of fluids and particles by dielectrophoresis and the use of carbon electrodes for dielectrophoresis in Lab-on-a-Chip. The use of these electrodes in sample preparation through electrical polarization of a sample for identification, manipulation, and lysis of bioparticles is also discussed and they introduce a new generation of neural prosthetics based on glassy carbon micromachined electrode arrays. The tuning of the electrical, electrochemical and mechanical properties of these patternable electrodes for applications in bio-electrical signal recording and stimulation, and results from in-vivo testing of these glassy carbon microelectrode arrays is reported, demonstrating a quantifiable superior performance compared to metal electrodes.