Download or read book Electrical Impedance written by Luca Callegaro and published by CRC Press. This book was released on 2012-11-06 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Impedance: Principles, Measurement, and Applications provides a modern and much-needed overview of electrical impedance measurement science and its application in metrology, sensor reading, device and material characterizations. It presents up-to-date coverage of the theory, practical methods, and modeling. The author covers the main impedance measurement techniques, stressing their practical application. The book includes a large set of measurement setup schematics, and diagrams and photos of standards and devices. It also offers an extensive list of references to both historical and recent papers on devices, methods, and traceability issues. Reviews the main definitions of the quantities related to impedance, some theorems of particular interest, the issue of impedance representation, and introduces the problem of impedance definition Lists devices, appliances, circuits, and instruments employed as building blocks of impedance measurement setups Classifies the main impedance measurement methods, including details on their implementation when a specific impedance definition is chosen Discusses the increasing use of mixed-signal electronics in impedance measurement setups Covers applications including details on the measurement of electromagnetic properties of materials Introduces impedance metrology, including artifact impedance standards, and the realization and reproduction of SI impedance units
Download or read book Electrochemical Impedance Spectroscopy written by Mark E. Orazem and published by John Wiley & Sons. This book was released on 2011-10-13 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using electrochemical impedance spectroscopy in a broad range of applications This book provides the background and training suitable for application of impedance spectroscopy to varied applications, such as corrosion, biomedical devices, semiconductors and solid-state devices, sensors, batteries, fuel cells, electrochemical capacitors, dielectric measurements, coatings, electrochromic materials, analytical chemistry, and imaging. The emphasis is on generally applicable fundamentals rather than on detailed treatment of applications. With numerous illustrative examples showing how these principles are applied to common impedance problems, Electrochemical Impedance Spectroscopy is ideal either for course study or for independent self-study, covering: Essential background, including complex variables, differential equations, statistics, electrical circuits, electrochemistry, and instrumentation Experimental techniques, including methods used to measure impedance and other transfer functions Process models, demonstrating how deterministic models of impedance response can be developed from physical and kinetic descriptions Interpretation strategies, describing methods of interpretating of impedance data, ranging from graphical methods to complex nonlinear regression Error structure, providing a conceptual understanding of stochastic, bias, and fitting errors in frequency-domain measurements An overview that provides a philosophy for electrochemical impedance spectroscopy that integrates experimental observation, model development, and error analysis This is an excellent textbook for graduate students in electrochemistry, materials science, and chemical engineering. It's also a great self-study guide and reference for scientists and engineers who work with electrochemistry, corrosion, and electrochemical technology, including those in the biomedical field, and for users and vendors of impedance-measuring instrumentation.
Download or read book Electrical Impedance Tomography written by Andy Adler and published by CRC Press. This book was released on 2021-12-19 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading international researchers, this second edition of Electrical Impedance Tomography: Methods, History and Applications has been fully updated throughout and contains new developments in the field, including sections on image interpretation and image reconstruction. Providing a thorough review of the progress of EIT, the present state of knowledge, and a look at future advances and applications, this accessible reference will be invaluable for mathematicians, physicists dealing with bioimpedance, electronic engineers involved in developing and extending its applications, and clinicians wishing to take advantage of this powerful imaging method. Key Features: Fully updated throughout, with new sections on image interpretation and image reconstruction Overview of the current state of experimental and clinical use of EIT as well as active research developments Overview of related research in geophysics, industrial process tomography, magnetic-resonance and magnetic-induction impedance imaging
Download or read book Electrical Impedance Tomography written by David S. Holder and published by CRC Press. This book was released on 2004-12-31 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, there has been steady progress in the research of electrical impedance tomography (EIT), leading to important developments. These developments have excited interest in practitioners and researchers from a broad range of disciplines, including mathematicians devoted to uniqueness proofs and inverse problems, physicists dealing with bioimpedance, electronic engineerers involved in developing and extending its applications, and clinicians wishing to take advantage of this powerful new imaging method. With contributions from leading international researchers, Electrical Impedance Tomography: Methods, History and Applications provides an up-to-date review of the progress of EIT, the present state of knowledge, and a look at future advances and applications. Divided into four parts, the book presents an interdisciplinary approach. The first part discusses reconstruction algorithms while the second part describes the aspects of EIT instrumentation, including frequencies and electrodes. The third part features various EIT studies, such as breast cancer screening and artificial ventilation in intensive care units. The final part surveys new developments in magnetic induction tomography and magnetic resonance EIT (MREIT) as well as offers insight into three of the most productive and longstanding EIT research groups. The book also includes two nontechnical appendices that provide a brief and simple introduction to bioimpedance and the methods of EIT. Written in a style accessible to all related backgrounds, this reference will be helpful in establishing new methods and experiments of EIT, hopefully leading to radical breakthroughs in mainstream clinical practice.
Download or read book 13th International Conference on Electrical Bioimpedance and 8th Conference on Electrical Impedance Tomography 2007 written by Hermann Scharfetter and published by Springer Science & Business Media. This book was released on 2007-10-27 with total page 846 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 13th International Conference on Electrical Bioimpedance, ICEBI 2007, combined with the 8th Conference on Electrical Impedance Tomography, held at the Graz University of Technology in Graz, Austria, in August 2007.
Download or read book Electrochemical Impedance Spectroscopy written by Marwa El-Azazy and published by BoD – Books on Demand. This book was released on 2020-12-16 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical Impedance Spectroscopy is a compendium of contributions from experts in the field of electrochemical impedance spectroscopy (EIS). This compilation of investigations and reviews addresses the groundbreaking applications of EIS in different fields. An array of exploitations are revealed throughout this book such as the use of EIS in monitoring and controlling of corrosion, in medicine where accurate information on fluid distribution is needed as well as environmental applications in food, water, and drug analyses. Competency of EIS as an approach compared to the traditional electrochemical techniques is assessed in almost every application. This book, therefore, is a valuable reference for students, researchers, and anyone interested in electrochemical impedance spectroscopy.
Download or read book Electrochemical Impedance Spectroscopy and its Applications written by Andrzej Lasia and published by Springer. This book was released on 2014-06-17 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a complete overview of the powerful but often misused technique of Electrochemical Impedance Spectroscopy (EIS). The book presents a systematic and complete overview of EIS. The book carefully describes EIS and its application in studies of electrocatalytic reactions and other electrochemical processes of practical interest. This book is directed towards graduate students and researchers in Electrochemistry. Concepts are illustrated through detailed graphics and numerous examples. The book also includes practice problems. Additional materials and solutions are available online.
Download or read book Electrochemical Impedance written by John R. Scully and published by ASTM International. This book was released on 1993 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of twenty-seven papers published has been grouped into six major categories : corrosion process characterization and modeling, applications of Kramers-Kronig transformations for evaluating the validity of data, corrosion and its inhibition by either corrosion products of specially added inhibitors, corrosion of aluminum and aluminum alloys, corrosion of steel in soils and concrete, and evaluation of coatings on metal substrates.
Download or read book Clinical and Physiological Applications of Electrical Impedance Tomography written by David Holder and published by CRC Press. This book was released on 1993-07-01 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emerging Technologies for Nutrition Research written by Institute of Medicine and published by National Academies Press. This book was released on 1997-09-03 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest of a series of publications based on workshops sponsored by the Committee on Military Nutrition Research, this book's focus on emerging technologies for nutrition research arose from a concern among scientists at the U.S. Army Research Institute of Environmental Medicine that traditional nutrition research, using standard techniques, centered more on complex issues of the maintenance or enhancement of performance, and might not be sufficiently substantive either to measure changes in performance or to predict the effects on performance of stresses soldiers commonly experience in operational environments. The committee's task was to identify and evaluate new technologies to determine whether they could help resolve important issues in military nutrition research. The book contains the committee's summary and recommendations as well as individually authored chapters based on presentations at a 1995 workshop. Other chapters cover techniques of body composition assessment, tracer techniques for the study of metabolism, ambulatory techniques for the determination of energy expenditure, molecular and cellular approaches to nutrition, the assessment of immune function, and functional and behavioral measures of nutritional status.
Download or read book Electrochemical Impedance Spectroscopy written by Mark E. Orazem and published by John Wiley & Sons. This book was released on 2017-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides fundamentals needed to apply impedance spectroscopy to a broad range of applications with emphasis on obtaining physically meaningful insights from measurements. Emphasizes fundamentals applicable to a broad range of applications including corrosion, biomedical devices, semiconductors, batteries, fuel cells, coatings, analytical chemistry, electrocatalysis, materials, and sensors Provides illustrative examples throughout the text that show how the principles are applied to common impedance problems New Edition has improved pedagogy, with more than twice the number of examples New Edition has more in-depth treatment of background material needed to understand impedance spectroscopy, including electrochemistry, complex variables, and differential equations New Edition includes expanded treatment of the influence of mass transport and kinetics and reflects recent advances in understanding frequency dispersion and constant-phase elements
Download or read book An Introduction to Electrochemical Impedance Spectroscopy written by Ramanathan Srinivasan and published by CRC Press. This book was released on 2021-05-03 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental aspects and the application of electrochemical impedance spectroscopy (EIS), with emphasis on a step-by-step procedure for mechanistic analysis of data. It enables the reader to learn the EIS technique, correctly acquire data from a system of interest, and effectively interpret the same. Detailed illustrations of how to validate the impedance spectra, use equivalent circuit analysis, and identify the reaction mechanism from the impedance spectra are given, supported by derivations and examples. MATLAB® programs for generating EIS data under various conditions are provided along with free online video lectures to enable easier learning. Features: Covers experimental details and nuances, data validation method, and two types of analysis – using circuit analogy and mechanistic analysis Details observations such as inductive loops and negative resistances Includes a dedicated chapter on an emerging technique (Nonlinear EIS), including code in the supplementary material illustrating simulations Discusses diffusion, constant phase element, porous electrodes, and films Contains exercise problems, MATLAB codes, PPT slide, and illustrative examples This book is aimed at senior undergraduates and advanced graduates in chemical engineering, analytical chemistry, electrochemistry, and spectroscopy.
Download or read book Mathematics and Physics of Emerging Biomedical Imaging written by Committee on the Mathematics and Physics of Emerging Dynamic Biomedical Imaging and published by National Academies Press. This book was released on 1996-03-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book documents the key research challenges in the mathematical sciences and physics that could enable the economical development of novel biomedical imaging devices. It is hoped that the infusion of new insights from mathematical scientists and physicists will accelerate progress in imaging. Incorporating input from dozens of biomedical researchers who described what they perceived as key open problems of imaging that are amenable to attack by mathematical scientists and physicists, this book introduces the frontiers of biomedical imaging, especially the imaging of dynamic physiological functions, to the educated nonspecialist. Ten imaging modalities are covered, from the well-established (e.g., CAT scanning, MRI) to the more speculative (e.g., electrical and magnetic source imaging). For each modality, mathematics and physics research challenges are identified and a short list of suggested reading offered. Two additional chapters offer visions of the next generation of surgical and interventional techniques and of image processing. A final chapter provides an overview of mathematical issues that cut across the various modalities.
Download or read book Bioimpedance and Bioelectricity Basics written by Orjan G. Martinsen and published by Academic Press. This book was released on 2014-08-14 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioimpedance and Bioelectricity Basics, 3rd Edition paves an easier and more efficient way for people seeking basic knowledge about this discipline. This book's focus is on systems with galvanic contact with tissue, with specific detail on the geometry of the measuring system. Both authors are internationally recognized experts in the field. The highly effective, easily followed organization of the second edition has been retained, with a new discussion of state-of-the-art advances in data analysis, modelling, endogenic sources, tissue electrical properties, electrodes, instrumentation and measurements. This book provides the basic knowledge of electrochemistry, electronic engineering, physics, physiology, mathematics, and model thinking that is needed to understand this key area in biomedicine and biophysics. Covers tissue immittance from the ground up in an intuitive manner, supported with figures and examples New chapters on electrodes and statistical analysis Discusses in detail dielectric and electrochemical aspects, geometry and instrumentation as well as electrical engineering concepts of network theory, providing a cross-disciplinary resource for engineers, life scientists, and physicists
Download or read book Methods of Measuring Electrical Resistance written by Edwin Fitch Northrup and published by . This book was released on 1912 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioimpedance in Biomedical Applications and Research written by Franco Simini and published by Springer. This book was released on 2018-03-16 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on the best contributions to the advancement of bioimpedance knowledge and use from the Latin American Congress series, CLABIO. Basic bioimpedance facts as well as promising and original contributions to bioimpedance theory and applications are presented, giving the reader stimulating material for reflection, decision making, and further experiments. Contributions come from a diverse international pool of experts and address topics on electrode and skin impedance modelling, tomography, spectroscopy, instrumentation, and clinical applications.
Download or read book Electrical Impedance Tomography written by Andy Adler and published by CRC Press. This book was released on 2021-12-19 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading international researchers, this second edition of Electrical Impedance Tomography: Methods, History and Applications has been fully updated throughout and contains new developments in the field, including sections on image interpretation and image reconstruction. Providing a thorough review of the progress of EIT, the present state of knowledge, and a look at future advances and applications, this accessible reference will be invaluable for mathematicians, physicists dealing with bioimpedance, electronic engineers involved in developing and extending its applications, and clinicians wishing to take advantage of this powerful imaging method. Key Features: Fully updated throughout, with new sections on image interpretation and image reconstruction Overview of the current state of experimental and clinical use of EIT as well as active research developments Overview of related research in geophysics, industrial process tomography, magnetic-resonance and magnetic-induction impedance imaging
