Download or read book Handbook of Electrical Hazards and Accidents written by Leslie A. Geddes and published by CRC Press. This book was released on 2018-01-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written mainly for attorneys, physicians, and investigators who are concerned with accidents associated with electric current. It is based on approximately 50 years of personal research, augmented by experience in teaching medical and biomedical engineering students and as an expert witness in litigation involving electrical injury. The material is presented in two ways: non-technically, for attorneys and physicians, and technically, for their expert witnesses and engineers. Since there is no typical electrical accident, the accidents described and the material presented in the chapters are selected to aid the reader in explaining the cause of any particular electrical accident.
Download or read book Handbook of Electrical Hazards and Accidents written by Leslie A. Geddes and published by CRC Press. This book was released on 2018-01-18 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written mainly for attorneys, physicians, and investigators who are concerned with accidents associated with electric current. It is based on approximately 50 years of personal research, augmented by experience in teaching medical and biomedical engineering students and as an expert witness in litigation involving electrical injury. The material is presented in two ways: non-technically, for attorneys and physicians, and technically, for their expert witnesses and engineers. Since there is no typical electrical accident, the accidents described and the material presented in the chapters are selected to aid the reader in explaining the cause of any particular electrical accident.
Download or read book Electrical Hazards and Accidents written by E. K. Greenwald and published by John Wiley & Sons. This book was released on 1991-09-15 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to prevent electrical hazards in the workplace is the focus of this guide. It spells out proper design, maintenance, and operating procedures for minimizing the risks of electrical fires, accidents, and injuries on the job. Coverage of the latest electrical standards helps you comply with the current National Electrical Code (NEC)?? and OSHA requirements. NEC requirements and procedures are provided for grounding an electrical distribution system, selecting proper conductors, sizing the feeder, and effective branch circuit overcurrent protection. Safety considerations are explored for single and three-phase systems, fuses, plugs, and ground fault circuit interrupters (GFCIs). The guide also clarifies factors that influence soil resistivity, and it analyzes correction factors for special situations such as high ambient temperature environments. Human responses to electric shock are covered in detail. Among the important areas addressed are the approximate electrical impedance of the human body, thresholds of shock perception, let-go currents, asphyxia, ventricular fibrillation, and respiratory arrest. A bounty of solutions to help you solve electrical safety problems related to: * Hazardous locations -- Find out how to assess potential ignition sources, ventilation requirements, surface temperature conditions, and conduit and cable sealing requirements. * Current-carrying conductors in fire environments -- See how to evaluate insulation behavior, conductor melting temperatures, and the effects of nicks and broken strands, as well as how to make investigations at the scene of a fire. * Lightning protection -- Equip yourself to determine the probability of lightning strikes in specific locations, and mitigate the effects of a direct strike on buildings, equipment, and personnel. How to provide voltage surge protection is also discussed. * Static electricity -- Learn about the fundamentals of electrical charge induction and mechanisms for static charge ignition. Numerous case histories provide valuable insights into accident provention. In addition, the guide provides a review of electricity basics ranging from definitions of terms to the physics of the electric arc. It provides full-scope coverage of all electrical safety issues in the workplace. Electrical Hazards and Accidents: Their Cause and Prevention is an essential source for facility engineers, electrical engineers, plant engineers, plant managers, electricians, regulatory managers, and accident and insurance investigators.
Download or read book Electrical Hazards written by and published by . This book was released on 1986 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Hazards and Accidents written by E. K. Greenwald and published by Van Nostrand Reinhold Company. This book was released on 1991 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Controlling Electrical Hazards written by United States. Occupational Safety and Health Administration and published by . This book was released on 1997 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Hazards Awareness Program written by and published by . This book was released on 1988 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Canadian Fundamentals of Fire Fighter Skills and Hazardous Materials Response includes Navigate Advantage Access written by IAFC and published by Jones & Bartlett Learning. This book was released on 2019-05-03 with total page 1404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Fire Fighter Skills, Canadian Fourth Edition is specifically designed for Canadian fire service. The National Fire Protection Association (NFPA) and the International Association of Fire Chiefs (IAFC) are pleased to bring you the most comprehensive, evidence-based curriculum that is sure to transform Canada’s fire fighter education. This edition is designed for Canadian fire services that are transitioning their training to NFPA compliance or wish to align their training with recognized best practices. The Canadian Fourth Edition features exceptional content, along with current research, standards, and technology, including the latest research-based data from UL Firefighter Safety Research Institute and the National Institute of Standards and Technology (NIST). This research explains the interrelationship between heat release rates, reduced time to flashover, and the dangers associated with fighting fires in modern lightweight-constructed buildings. Foundational knowledge is covered extensively, along with an orientation and history of Canada’s fire service and extreme cold weather operations. The content in the Canadian Fourth Edition meets and exceeds the job performance requirements in the 2019 edition of NFPA 1001, Standard for Fire Fighter Professional Qualification, including the requirements for operations level personnel in the 2017 Edition of NFPA 1072, Standard for Hazardous Materials/Weapons of Mass Destruction Emergency Response Personnel Professional Qualifications, and the 2018 Edition of NFPA 472, Standard for Competence of Responders to Hazardous Materials/Weapons of Mass Destruction Incidents. New to the Canadian Fourth Edition: • Five distinct sections: Fire fighter I, Fire fighter II, Hazardous Materials Awareness, Hazardous Materials Operations, Hazardous Materials Operations: Mission Specific • A personal health and well-being section that addresses physical fitness, nutrition, hydration, sleep, heart disease, cancer, tobacco, alcohol and illicit drugs, counseling and stress management, and suicide awareness and prevention. • The importance of respiratory protection and the use of air monitoring devices during salvage and overhaul operations. • The need to perform field reduction of contaminants to remove dirt and debris from personal protective equipment before returning to the station. • The basic principles of community risk reduction, including the integration of emergency response, engineering enforcement, education, and economic incentives as cohesive strategies to manage community risks. • Critical fire suppression tactics, including those used for concealed space fires, attic fires, buildings with solar photovoltaic systems, and chimney fires. • Updated research and statistics to ensure evidence-based recommendations and protocols. The Canadian Fourth Edition Features • Alerts to additional content available in Navigate 2. • Thought-provoking case studies. • Detailed chapter summaries, key terms, and
Download or read book Hazards and Safety in Process Industries written by Mihir Kumar Purkait and published by CRC Press. This book was released on 2021-03-23 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in process industries is of utmost necessity to ensure protection from hazards. The aim of this book is to elucidate the hazards and preventive measures for a few of such specific industrial processes. Starting with overview of the prevalent industrial accidents, types of hazards and safety provisions, the book contains nineteen chapters with each one of them consisting of a unique case study comprising of basic causes, results and discussion, and protective measures to be adopted to overcome such situation. Topics covered include caprolactam storage tank accident, fire explosion accident caused by static electricity, and human factors risk and management in process safety and so forth. Aimed at researchers, professionals, graduate students in Chemical Engineering, Safety Management, Risk Assessment, Chemical Process Safety, this book: Provides exhaustive coverage of industrial case studies on their hazards and safety issues in the process industry set-up. Includes quantitative discussion on new and existing technologies and methodologies. Explores high quality descriptive and quantified data for better visualization of each chapter. Gives detailed description on various industrial accidents, their related consequences and available safety/preventive measures. Discusses preventive measures taken by world class industries in their production plants.
Download or read book Safe Work Practices for Wastewater Treatment Plants written by Frank R. Spellman and published by CRC Press. This book was released on 2018-10-08 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details how to start and maintain a successful safety program in a municipal or industrial water or wastewater plant with special emphasis on the practical implementation. This new edition provides the latest OSHA regulations and recommendations, and each chapter has been updated with new information, including the latest innovations related to all types of successfully proven health and safety protocols. Coverage includes safety programs, recordkeeping, safety training, safety equipment, and safe work practices for wastewater treatment facilities. In addition, much of the text should be relevant to safety and health professionals in almost any industrial setting.
Download or read book Surviving an OSHA Audit written by Frank R. Spellman and published by CRC Press. This book was released on 2020-12-18 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hailed on its first publication as a masterly account detailing a roadmap for compliance with workplace standards, regulations, and rules, Surviving an OSHA Audit: A Management Guide, Second Edition, is specifically designed for managers and other professionals who seek to provide a safe work environment. It also serves as a helpful reference for those who want to keep OSHA from repeatedly knocking on the door and issuing citations that can be both embarrassing and expensive. Completely revised and updated with eight important chapters added, emphasis is placed on compliance through vigilance and proper work practices. With compliance in mind, it is important to recognize that OSHA regulations, standards, or rulings are not static; they continue to be revised over time. This new edition highlights those areas of regulation that have changed as well as those that are still current and relevant. Features: Fully updated to reflect the most up-to-date changes in regulation. Presents numerous practical examples throughout. Examines the importance of and best practices for recordkeeping protocols. This book is an excellent resource and guide relevant to a broad audience, including academia, legal professionals, workplace managers, safety professionals, students, and administrators at all levels.
Download or read book Live Articles on Special Hazards written by and published by . This book was released on 1913 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanized Mining Brings New Electrical Hazards written by E. J. Gleim and published by . This book was released on 1941 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Safety and Health for Infrastructure Services written by Charles D. Reese and published by CRC Press. This book was released on 2008-10-24 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Safety and Health for Infrastructure Services provides an in-depth look into the areas of transportation, utilities, administrative, waste management, and remediation. It covers OSHA regulations in reference to the major safety and health hazards associated within these five fields. This user-friendly text:Provides guidance on removal, d
Download or read book Introduction to Health and Safety in Construction written by Phil Hughes and published by Routledge. This book was released on 2008-06-12 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highly illustrated and easy to read, this text covers the specific challenges faced by the construction industry as well as the basics of occupational safety and health in general. It includes checklists, report forms, and record sheets.
Download or read book Management of Hazardous Energy written by Thomas Neil McManus and published by CRC Press. This book was released on 2012-08-08 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazardous energy present in systems, machines, and equipment has injured, maimed, and killed many workers. One serious injury can stop the growth of your business in its tracks. Management of Hazardous Energy: Deactivation, De-Energization, Isolation, and Lockout provides the practical tools needed to assess hazardous energy in equipment, machines, and systems, and covers how to manage hazardous energy through elimination or control in order to ensure worker safety and regulatory compliance. Written in plain English with a minimum of jargon, this book provides safety professionals with the knowledge they need to interact with specialists, designers, and engineers to ensure that appropriate and necessary protocols and safety practices and tools are put into place for assessing the dangers and steps taken to eliminate or control exposure to hazardous energy when needed. Approaching the subject from the bottom up, the author starts at the workplace level, to ensure that the right actions happen for the right reasons. The book explains a protocol for describing the flow of energy, including transformation and/or storage; for capturing the logic of decisions about control, including failure analysis and contingency planning; and ultimately for creating procedures that are technically sound and defensible. Creating simple procedures for ensuring worker safety and regulatory compliance, the book offers US and international strategies for hazardous energy management and contains examples to illustrate the application of concepts to specific areas.
Download or read book The Electrical Safety Program Guide written by Ray A. Jones (P.E.) and published by Jones & Bartlett Publishers. This book was released on 2011 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the 2009 NFPA 70E and current OSHA regulations, this updated edition takes readers step-by-step through the creation of an electrical safety program, discussing program development from conception through finalization for a plan tailored to a company's unique environment.
