Download or read book Advanced Methods of Machining written by J.A. McGeough and published by Springer Science & Business Media. This book was released on 1988-09-30 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides production and mechanical engineers with the techniques of machining that have been developed to deal with new materials such as polymers, hard metals and ceramics, difficult to treat by conventional methods because of either hardness of components or the high accuracies of machining required. Annotation copyright Book News, Inc. Portland.

Download or read book Micro Electro Discharge Machining written by Irene Fassi and published by . This book was released on 2021-10-25 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micro electrical discharge machining (micro-EDM) is a thermo-electric and contactless process most suited for micro-manufacturing and high-precision machining, especially when difficult-to-cut materials, such as super alloys, composites, and electro conductive ceramics, are processed. Many industrial domains exploit this technology to fabricate highly demanding components, such as high-aspect-ratio micro holes for fuel injectors, high-precision molds, and biomedical parts. Moreover, the continuous trend towards miniaturization and high precision functional components boosted the development of control strategies and optimization methodologies specifically suited to address the challenges in micro- and nano-scale fabrication. This Special Issue showcases 12 research papers and a review article focusing on novel methodological developments on several aspects of micro electrical discharge machining: machinability studies of hard materials (TiNi shape memory alloys, Si3N4-TiN ceramic composite, ZrB2-based ceramics reinforced with SiC fibers and whiskers, tungsten-cemented carbide, Ti-6Al-4V alloy, duplex stainless steel, and cubic boron nitride), process optimization adopting different dielectrics or electrodes, characterization of mechanical performance of processed surface, process analysis, and optimization via discharge pulse-type discrimination, hybrid processes, fabrication of molds for inflatable so���� microactuators, and implementation of low-cost desktop micro- EDM system.

Download or read book Conventional and Powder Mixed Electro Discharge Machining written by Ahmad Majdi Abdul-Rani and published by CRC Press. This book was released on 2024-09-02 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the evolution of the electro-discharge machining (EDM) process from conventional EDM to powder mixed EDM with emphases on biomedical applications. It discusses the theory behind each process and their applications in the field of biomedical research, and presents a brief background to various EDM processes, current research challenges, and detailed case studies of powder mixed EDM of various materials. It also includes a state-of-the-art review of the EDM process. Features: Focuses on biomedical implant and device manufacturing using commercialization of powder mixed electro-discharge machining (PM-EDM) technology Discusses surface modification of biomaterials through the PM-EDM process Reviews processing of the metallic biomaterials for biomedical applications Explores optimization of the process factors for achieving optimal responses using NSGA-II Includes comprehensive mechanism and application details of the PM-EDM process This book is aimed at graduate students and researchers in manufacturing, production, materials, and biomedical engineering.

Download or read book Machining of Metal Matrix Composites written by J. Paulo Davim and published by Springer Science & Business Media. This book was released on 2011-09-18 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Machining of Metal Matrix Composites provides the fundamentals and recent advances in the study of machining of metal matrix composites (MMCs). Each chapter is written by an international expert in this important field of research. Machining of Metal Matrix Composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and Chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, Chapter 7 is dedicated to computational methods and optimization in the machining of MMCs. Machining of Metal Matrix Composites can serve as a useful reference for academics, manufacturing and materials researchers, manufacturing and mechanical engineers, and professionals involved with MMC applications. It can also be used to teach modern manufacturing engineering or as a textbook for advanced undergraduate and postgraduate engineering courses in machining, manufacturing or materials.

Download or read book Electric Discharge Hybrid Machining Processes written by Basil Kuriachen and published by CRC Press. This book was released on 2022-03-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the knowledge and insight into the fundamental aspects of Electric Discharge Machining (EDM) processes and various hybrid machining technologies derived to improve the machining efficiencies. Fundamental theory of material removal, recent research trends and future research directions have been covered in each chapter. After explaining EDM, Dry and Near-dry EDM processes, Electrochemical Spark Machining, Arc Machining processes, Electric Discharge Hybrid-Turning processes, Electrical Discharge Grinding, Electric Discharge Milling, and various assisted EDM processes have been discussed. Finally, modeling and simulation of hybrid machining processes are also included. The book reflects the recent developments and trends in electric discharge hybrid machining processes. It covers in detail the basics of EDM, various hybrid and assistive technologies in EDM. It includes the updated discussion on the significance of process parameters in various hybrid EDM processes. An overview of modelling and simulation of hybrid EDM process is provided. This book is aimed at Graduate students, researchers in manufacturing engineering, production engineering, and materials engineering.

Download or read book Non Conventional Machining in Modern Manufacturing Systems written by Kumar, Kaushik and published by IGI Global. This book was released on 2018-09-21 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continuous improvements in machining practices have created opportunities for businesses to develop more streamlined processes. This not only leads to higher success in day-to-day production, but also increases the overall success of businesses. Non-Conventional Machining in Modern Manufacturing Systems provides emerging research exploring the theoretical and practical aspects of technological advancements in industrial environments and applications in manufacturing. Featuring coverage on a broad range of topics such as optimization techniques, electrical discharge machining, and hot machining, this book is ideally designed for business managers, engineers, business professionals, researchers, and academicians seeking current research on non-conventional and technologically advanced machining processes.

Download or read book Advanced Machining Processes written by Prof. Vijay Kumar Jain and published by Allied Publishers. This book was released on 2009 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Micro electrical Discharge Machining Processes written by Golam Kibria and published by Springer. This book was released on 2019-02-04 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive collection of micro electrical discharge machining (EDM) processes, including hybrid processes. It discusses the theory behind each process and their applications in various technological as well as biomedical domains, and also presents a brief background to various micro EDM processes, current research challenges, and detailed case studies of micro-manufacturing miniaturized parts. The book serves as a valuable guide for students and researchers interested in micro EDM and other related processes.

Download or read book Non Conventional Hybrid Machining Processes written by Rupinder Singh and published by CRC Press. This book was released on 2020-10-29 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book covers process optimization and process capability for hybrid NCMP (nonconventional machining process), and combines NCMP and conventional machining removal processes for various hybridized processes. This book is focused on understanding the basic mechanism of some of the NCMPs for their possible hybridization. This book can be used for the development of a basic framework on hybridization for the selected NCMP. The framework is further strengthened by case studies included in this book. The concept of macro-modeling for NCMP and the framework for the development of industrial standards have been outlined. This book is of interest to researchers and graduate students working in the field of hybrid NCMP, especially for the development of novel processes. Field engineers of NCMP may also use it for further process development. Features: Provides a detailed description of mechanism for different NCMPs for possible hybridization. Includes a case study on mechanism of processes. Offers a systematic approach for understanding NCMP. Covers the issues of process optimization and process capability for hybrid NCMP.

Download or read book Advances in Unconventional Machining and Composites written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-22 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents research papers on unconventional machining (also known as non-traditional machining and advanced manufacturing) and composites which were presented during the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The volume discusses improvements on well-established unconventional machining processes and novel or hybrid machining processes as well as properties, fabrication techniques and machining of composite materials. This volume will be of interest to academicians, researchers, and practicing engineers alike.

Download or read book Modern Machining Processes written by P. C. Pandey and published by McGraw-Hill Companies. This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Machining Processes presents unconventional machining methods which are gradually commercial acceptance. All aspects of mechanical, electrochemical and thermal processes are comprehensively covered.Processes likeAbrasive Jet Machining Water Jet MachiningLaser Beam MachiningHot MachiningPlasma Arc Machininghave also been included. It gives a balanced account of both theory and applications, contains illustrative exercises and an extensive up-to-date bibliography. The book should be useful to students of production and mechanical engineering, as well as practising engineers.

Download or read book Advances in Manufacturing and Industrial Engineering written by Ranganath M. Singari and published by Springer Nature. This book was released on 2021-01-13 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected peer reviewed papers from the International Conference on Advanced Production and Industrial Engineering (ICAPIE 2019). It covers a wide range of topics and latest research in mechanical systems engineering, materials engineering, micro-machining, renewable energy, industrial and production engineering, and additive manufacturing. Given the range of topics discussed, this book will be useful for students and researchers primarily working in mechanical and industrial engineering, and energy technologies.

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Recent Advances in Smart Manufacturing and Materials written by Rajeev Agrawal and published by Springer Nature. This book was released on 2021-07-22 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the International Conference on Evolution in Manufacturing (ICEM 2020), and examines a range of areas including internet-of-things for cyber manufacturing, data analytics for manufacturing systems and processes and materials. The topics covered include modeling simulation and decision making in cyber physical systems for supporting engineering and production management, innovative approach in materials development, biomaterial applications, and advancement in manufacturing and material technologies. The book also discusses sustainability in manufacturing and supply chain management including circular economy. The book will be a valuable reference for beginners, researchers, and professionals interested in smart manufacturing in engineering, production management and materials technology.

Download or read book Advances in Manufacturing Technology written by Somashekhar S. Hiremath and published by Springer. This book was released on 2019-04-17 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented at the International Conference on Advances in Manufacturing Technology (ICAMT 2018). It includes contributions from different researchers and practitioners working in the field of advanced manufacturing technology. This book covers diverse topics of contemporary manufacturing technology including material processes, machine tools, cutting tools, robotics and automation, manufacturing systems, optimization technologies, 3D scanning and re-engineering, and 3D printing. Computer applications in design, analysis, and simulation tools for solving manufacturing problems at various levels starting from material designs to complex manufacturing systems are also discussed. This book will be useful for students, researchers, and practitioners working in the field of manufacturing technology.

Download or read book Environmentally Friendly Product Development written by Eberhard Abele and published by Springer Science & Business Media. This book was released on 2007-08-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of environmentally friendly products gains an increasing - portance in science and in industry. While product development was strongly dedicated to achieve quality, cost and time targets, environmental issues indirectly had always been under consideration by engineers, see Fig. 1. Furthermore a methodology for the development of environm- tally sound products was missing. Despite of significant progress in using computer aided tools for product development and design, environmental aspects were attended. Computer aided tools typically do not include methods for considering environmental issues enabling the designer to - sess a product’s environmental effects. Fig. 1. Vision of Environment as a key target for product development v vi Preface Product related environmental issues are getting more and more political and public awareness. Development of environmentally friendly products has become an action item for both, politics and industry (UNFCCC 1997). Energy consumption is on the agenda and covers pollution and resource saving. Typical topics of directives of the European Union are waste, noise, air pollution, water, nature and biodiversity, soil protection, civil protection and climate change. After the translation into national law the development of environmentally friendly products is a basic approach to contribute to the fulfilment of the topics mentioned above. In the European Community a “Communication from the Commission to the Council and the European Parliament” on “Integrated Product Policy” was adopted on th 18 June 2003 (EC 2003).

Download or read book Advances in Applied Mechanical Engineering written by Hari Kumar Voruganti and published by Springer Nature. This book was released on 2020-02-01 with total page 1161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer reviewed proceedings of the International Conference on Applied Mechanical Engineering Research (ICAMER 2019). The books examines various areas of mechanical engineering namely design, thermal, materials, manufacturing and industrial engineering covering topics like FEA, optimization, vibrations, condition monitoring, tribology, CFD, IC engines, turbo-machines, automobiles, manufacturing processes, machining, CAM, additive manufacturing, modelling and simulation of manufacturing processing, optimization of manufacturing processing, supply chain management, and operations management. In addition, recent studies on composite materials, materials characterization, fracture and fatigue, advanced materials, energy storage, green building, phase change materials and structural change monitoring are also covered. Given the contents, this book will be useful for students, researchers and professionals working in mechanical engineering and allied fields.