Download or read book Electrical Design of Through Silicon Via written by Manho Lee and published by Springer. This book was released on 2014-05-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through Silicon Via (TSV) is a key technology for realizing three-dimensional integrated circuits (3D ICs) for future high-performance and low-power systems with small form factors. This book covers both qualitative and quantitative approaches to give insights of modeling TSV in a various viewpoints such as signal integrity, power integrity and thermal integrity. Most of the analysis in this book includes simulations, numerical modelings and measurements for verification. The author and co-authors in each chapter have studied deep into TSV for many years and the accumulated technical know-hows and tips for related subjects are comprehensively covered.
Download or read book Through Silicon Vias written by Brajesh Kumar Kaushik and published by CRC Press. This book was released on 2016-11-30 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in semiconductor technology offer vertical interconnect access (via) that extend through silicon, popularly known as through silicon via (TSV). This book provides a comprehensive review of the theory behind TSVs while covering most recent advancements in materials, models and designs. Furthermore, depending on the geometry and physical configurations, different electrical equivalent models for Cu, carbon nanotube (CNT) and graphene nanoribbon (GNR) based TSVs are presented. Based on the electrical equivalent models the performance comparison among the Cu, CNT and GNR based TSVs are also discussed.
Download or read book Through Silicon Vias for 3D Integration written by John H. Lau and published by McGraw Hill Professional. This book was released on 2012-08-05 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to TSV and other enabling technologies for 3D integration Written by an expert with more than 30 years of experience in the electronics industry, Through-Silicon Vias for 3D Integration provides cutting-edge information on TSV, wafer thinning, thin-wafer handling, microbumping and assembly, and thermal management technologies. Applications to highperformance, high-density, low-power-consumption, wide-bandwidth, and small-form-factor electronic products are discussed. This book offers a timely summary of progress in all aspects of this fascinating field for professionals active in 3D integration research and development, those who wish to master 3D integration problem-solving methods, and anyone in need of a low-power, wide-bandwidth design and high-yield manufacturing process for interconnect systems. Coverage includes: Nanotechnology and 3D integration for the semiconductor industry TSV etching, dielectric-, barrier-, and seed-layer deposition, Cu plating, CMP, and Cu revealing TSVs: mechanical, thermal, and electrical behaviors Thin-wafer strength measurement Wafer thinning and thin-wafer handling Microbumping, assembly, and reliability Microbump electromigration Transient liquid-phase bonding: C2C, C2W, and W2W 2.5D IC integration with interposers 3D IC integration with interposers Thermal management of 3D IC integration 3D IC packaging
Download or read book Through Silicon Vias written by Brajesh Kumar Kaushik and published by CRC Press. This book was released on 2016-11-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in semiconductor technology offer vertical interconnect access (via) that extend through silicon, popularly known as through silicon via (TSV). This book provides a comprehensive review of the theory behind TSVs while covering most recent advancements in materials, models and designs. Furthermore, depending on the geometry and physical configurations, different electrical equivalent models for Cu, carbon nanotube (CNT) and graphene nanoribbon (GNR) based TSVs are presented. Based on the electrical equivalent models the performance comparison among the Cu, CNT and GNR based TSVs are also discussed.
Download or read book Designing TSVs for 3D Integrated Circuits written by Nauman Khan and published by Springer. This book was released on 2012-09-23 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the challenges and presents best strategies for designing Through-Silicon Vias (TSVs) for 3D integrated circuits. It describes a novel technique to mitigate TSV-induced noise, the GND Plug, which is superior to others adapted from 2-D planar technologies, such as a backside ground plane and traditional substrate contacts. The book also investigates, in the form of a comparative study, the impact of TSV size and granularity, spacing of C4 connectors, off-chip power delivery network, shared and dedicated TSVs, and coaxial TSVs on the quality of power delivery in 3-D ICs. The authors provide detailed best design practices for designing 3-D power delivery networks. Since TSVs occupy silicon real-estate and impact device density, this book provides four iterative algorithms to minimize the number of TSVs in a power delivery network. Unlike other existing methods, these algorithms can be applied in early design stages when only functional block- level behaviors and a floorplan are available. Finally, the authors explore the use of Carbon Nanotubes for power grid design as a futuristic alternative to Copper.
Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: Manufacturing techniques for 3-D ICs with TSVs Electrical modeling and closed-form expressions of through silicon vias Substrate noise coupling in heterogeneous 3-D ICs Design of 3-D ICs with inductive links Synchronization in 3-D ICs Variation effects on 3-D ICs Correlation of WID variations for intra-tier buffers and wires Offers practical guidance on designing 3-D heterogeneous systems Provides power delivery of 3-D ICs Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more Provides experimental case studies in power delivery, synchronization, and thermal characterization
Download or read book Design for High Performance Low Power and Reliable 3D Integrated Circuits written by Sung Kyu Lim and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a variety of algorithms and software tools, dedicated to the physical design of through-silicon-via (TSV) based, three-dimensional integrated circuits. It describes numerous “manufacturing-ready” GDSII-level layouts of TSV-based 3D ICs developed with the tools covered in the book. This book will also feature sign-off level analysis of timing, power, signal integrity, and thermal analysis for 3D IC designs. Full details of the related algorithms will be provided so that the readers will be able not only to grasp the core mechanics of the physical design tools, but also to be able to reproduce and improve upon the results themselves. This book will also offer various design-for-manufacturability (DFM), design-for-reliability (DFR), and design-for-testability (DFT) techniques that are considered critical to the physical design process.
Download or read book Design And Modeling For 3d Ics And Interposers written by Swaminathan Madhavan and published by World Scientific. This book was released on 2013-11-05 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D Integration is being touted as the next semiconductor revolution. This book provides a comprehensive coverage on the design and modeling aspects of 3D integration, in particularly, focus on its electrical behavior. Looking from the perspective the Silicon Via (TSV) and Glass Via (TGV) technology, the book introduces 3DICs and Interposers as a technology, and presents its application in numerical modeling, signal integrity, power integrity and thermal integrity. The authors underscored the potential of this technology in design exchange formats and power distribution.
Download or read book Signal Processing and Analysis of Electrical Circuit written by Adam Glowacz and published by MDPI. This book was released on 2020-03-13 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue with 35 published articles shows the significance of the topic “Signal Processing and Analysis of Electrical Circuit”. This topic has been gaining increasing attention in recent times. The presented articles can be categorized into four different areas: signal processing and analysis methods of electrical circuits; electrical measurement technology; applications of signal processing of electrical equipment; fault diagnosis of electrical circuits. It is a fact that the development of electrical systems, signal processing methods, and circuits has been accelerating. Electronics applications related to electrical circuits and signal processing methods have gained noticeable attention in recent times. The methods of signal processing and electrical circuits are widely used by engineers and scientists all over the world. The constituent papers represent a significant contribution to electronics and present applications that can be used in industry. Further improvements to the presented approaches are required for realizing their full potential.
Download or read book Electrical Modeling and Design for 3D System Integration written by Er-Ping Li and published by John Wiley & Sons. This book was released on 2012-04-10 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: New advanced modeling methods for simulating the electromagnetic properties of complex three-dimensional electronic systems Based on the author's extensive research, this book sets forth tested and proven electromagnetic modeling and simulation methods for analyzing signal and power integrity as well as electromagnetic interference in large complex electronic interconnects, multilayered package structures, integrated circuits, and printed circuit boards. Readers will discover the state of the technology in electronic package integration and printed circuit board simulation and modeling. In addition to popular full-wave electromagnetic computational methods, the book presents new, more sophisticated modeling methods, offering readers the most advanced tools for analyzing and designing large complex electronic structures. Electrical Modeling and Design for 3D System Integration begins with a comprehensive review of current modeling and simulation methods for signal integrity, power integrity, and electromagnetic compatibility. Next, the book guides readers through: The macromodeling technique used in the electrical and electromagnetic modeling and simulation of complex interconnects in three-dimensional integrated systems The semi-analytical scattering matrix method based on the N-body scattering theory for modeling of three-dimensional electronic package and multilayered printed circuit boards with multiple vias Two- and three-dimensional integral equation methods for the analysis of power distribution networks in three-dimensional package integrations The physics-based algorithm for extracting the equivalent circuit of a complex power distribution network in three-dimensional integrated systems and printed circuit boards An equivalent circuit model of through-silicon vias Metal-oxide-semiconductor capacitance effects of through-silicon vias Engineers, researchers, and students can turn to this book for the latest techniques and methods for the electrical modeling and design of electronic packaging, three-dimensional electronic integration, integrated circuits, and printed circuit boards.
Download or read book Modeling and Design of Electromagnetic Compatibility for High Speed Printed Circuit Boards and Packaging written by Xing-Chang Wei and published by CRC Press. This book was released on 2017-09-19 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Design of Electromagnetic Compatibility for High-Speed Printed Circuit Boards and Packaging presents the electromagnetic modelling and design of three major electromagnetic compatibility (EMC) issues related to the high-speed printed circuit board (PCB) and electronic packages: signal integrity (SI), power integrity (PI), and electromagnetic interference (EMI). The emphasis is put on two essential passive components of PCBs and packages: the power distribution network and the signal distribution network. This book includes two parts. Part one talks about the field-circuit hybrid methods used for the EMC modeling, including the modal method, the integral equation method, the cylindrical wave expansion method and the de-embedding method. Part two illustrates EMC design methods and explores the applications of novel metamaterials and two-dimensional materials on traditional EMC problems. This book is designed to enhance worthwhile electromagnetic theory and mathematical methods for practical engineers and to train students with advanced EMC applications.
Download or read book Design for Test and Test Optimization Techniques for TSV based 3D Stacked ICs written by Brandon Noia and published by Springer Science & Business Media. This book was released on 2013-11-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes innovative techniques to address the testing needs of 3D stacked integrated circuits (ICs) that utilize through-silicon-vias (TSVs) as vertical interconnects. The authors identify the key challenges facing 3D IC testing and present results that have emerged from cutting-edge research in this domain. Coverage includes topics ranging from die-level wrappers, self-test circuits, and TSV probing to test-architecture design, test scheduling, and optimization. Readers will benefit from an in-depth look at test-technology solutions that are needed to make 3D ICs a reality and commercially viable.
Download or read book More than Moore Technologies for Next Generation Computer Design written by Rasit O. Topaloglu and published by Springer. This book was released on 2015-02-09 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of key technologies being used to address challenges raised by continued device scaling and the extending gap between memory and central processing unit performance. Authors discuss in detail what are known commonly as “More than Moore” (MtM), technologies, which add value to devices by incorporating functionalities that do not necessarily scale according to “Moore's Law”. Coverage focuses on three key technologies needed for efficient power management and cost per performance: novel memories, 3D integration and photonic on-chip interconnect.
Download or read book Physical Design for 3D Integrated Circuits written by Aida Todri-Sanial and published by CRC Press. This book was released on 2017-12-19 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Design for 3D Integrated Circuits reveals how to effectively and optimally design 3D integrated circuits (ICs). It also analyzes the design tools for 3D circuits while exploiting the benefits of 3D technology. The book begins by offering an overview of physical design challenges with respect to conventional 2D circuits, and then each chapter delivers an in-depth look at a specific physical design topic. This comprehensive reference: Contains extensive coverage of the physical design of 2.5D/3D ICs and monolithic 3D ICs Supplies state-of-the-art solutions for challenges unique to 3D circuit design Features contributions from renowned experts in their respective fields Physical Design for 3D Integrated Circuits provides a single, convenient source of cutting-edge information for those pursuing 2.5D/3D technology.
Download or read book TSV 3D RF Integration written by Shenglin Ma and published by Elsevier. This book was released on 2022-04-27 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: TSV 3D RF Integration: High Resistivity Si Interposer Technology systematically introduces the design, process development and application verification of high-resistivity silicon interpose technology, addressing issues of high frequency loss and high integration level. The book includes a detailed demonstration of the design and process development of Hr-Si interposer technology, gives case studies, and presents a systematic literature review. Users will find this to be a resource with detailed demonstrations of the design and process development of HR-Si interposer technologies, including quality monitoring and methods to extract S parameters. A series of cases are presented, including an example of an integrated inductor, a microstrip inter-digital filter, and a stacked patch antenna. Each chapter includes a systematic and comparative review of the research literature, offering researchers and engineers in microelectronics a uniquely useful handbook to help solve problems in 3D heterogenous RF integration oriented Hr-Si interposer technology. Provides a detailed demonstration of the design and process development of HR-Si (High-Resistivity Silicon) interposer technology Presents a series of implementation case studies that detail modeling and simulation, integration, qualification and testing methods Offers a systematic and comparative literature review of HR-Si interposer technology by topic Offers solutions to problems with TSV (through silicon via) interposer technology, including high frequency loss and cooling problems Gives a systematic and accessible accounting on this leading technology
Download or read book Noise Coupling in System on Chip written by Thomas Noulis and published by CRC Press. This book was released on 2018-01-09 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Noise Coupling is the root-cause of the majority of Systems on Chip (SoC) product fails. The book discusses a breakthrough substrate coupling analysis flow and modelling toolset, addressing the needs of the design community. The flow provides capability to analyze noise components, propagating through the substrate, the parasitic interconnects and the package. Using this book, the reader can analyze and avoid complex noise coupling that degrades RF and mixed signal design performance, while reducing the need for conservative design practices. With chapters written by leading international experts in the field, novel methodologies are provided to identify noise coupling in silicon. It additionally features case studies that can be found in any modern CMOS SoC product for mobile communications, automotive applications and readout front ends.
Download or read book 3D Interconnect Architectures for Heterogeneous Technologies written by Lennart Bamberg and published by Springer Nature. This book was released on 2022-06-27 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the first comprehensive approach to the optimization of interconnect architectures in 3D systems on chips (SoCs), specially addressing the challenges and opportunities arising from heterogeneous integration. Readers learn about the physical implications of using heterogeneous 3D technologies for SoC integration, while also learning to maximize the 3D-technology gains, through a physical-effect-aware architecture design. The book provides a deep theoretical background covering all abstraction-levels needed to research and architect tomorrow’s 3D-integrated circuits, an extensive set of optimization methods (for power, performance, area, and yield), as well as an open-source optimization and simulation framework for fast exploration of novel designs.
