Download or read book Transients of Modern Power Electronics written by Hua Bai and published by John Wiley & Sons. This book was released on 2011-07-05 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: In high power, high voltage electronics systems, a strategy to manage short timescale energy imbalances is fundamental to the system reliability. Without a theoretical framework, harmful local convergence of energy can affect the dynamic process of transformation, transmission, and storage which create an unreliable system. With an original approach that encourages understanding of both macroscopic and microscopic factors, the authors offer a solution. They demonstrate the essential theory and methodology for the design, modeling and prototyping of modern power electronics converters to create highly effective systems. Current applications such as renewable energy systems and hybrid electric vehicles are discussed in detail by the authors. Key features: offers a logical guide that is widely applicable to power electronics across power supplies, renewable energy systems, and many other areas analyses the short-scale (nano-micro second) transient phenomena and the transient processes in nearly all major timescales, from device switching processes at the nanoscale level, to thermal and mechanical processes at second level explores transient causes and shows how to correct them by changing the control algorithm or peripheral circuit includes two case studies on power electronics in hybrid electric vehicles and renewable energy systems Practitioners in major power electronic companies will benefit from this reference, especially design engineers aiming for optimal system performance. It will also be of value to faculty staff and graduate students specializing in power electronics within academia.

Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.

Download or read book Power Electronics for Renewable and Distributed Energy Systems written by Sudipta Chakraborty and published by Springer Science & Business Media. This book was released on 2013-06-12 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: While most books approach power electronics and renewable energy as two separate subjects, Power Electronics for Renewable and Distributed Energy Systems takes an integrative approach; discussing power electronic converters topologies, controls and integration that are specific to the renewable and distributed energy system applications. An overview of power electronic technologies is followed by the introduction of various renewable and distributed energy resources that includes photovoltaics, wind, small hydroelectric, fuel cells, microturbines and variable speed generation. Energy storage systems such as battery and fast response storage systems are discussed along with application-specific examples. After setting forth the fundamentals, the chapters focus on more complex topics such as modular power electronics, microgrids and smart grids for integrating renewable and distributed energy. Emerging topics such as advanced electric vehicles and distributed control paradigm for power system control are discussed in the last two chapters. With contributions from subject matter experts, the diagrams and detailed examples provided in each chapter make Power Electronics for Renewable and Distributed Energy Systems a sourcebook for electrical engineers and consultants working to deploy various renewable and distributed energy systems and can serve as a comprehensive guide for the upper-level undergraduates and graduate students across the globe.

Download or read book Oxide Reliability A Summary Of Silicon Oxide Wearout Breakdown And Reliability written by David J Dumin and published by World Scientific. This book was released on 2002-01-18 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents in summary the state of our knowledge of oxide reliability. The articles have been written by experts who are among the most knowledgeable in the field. The book will be an invaluable aid to reliability engineers and manufacturing engineers, helping them to produce and characterize reliable oxides. It can be used as an introduction for new engineers interested in oxide reliability, besides being a reference for engineers already engaged in the field.

Download or read book On the Perspectives of Wide Band Gap Power Devices in Electronic Based Power Conversion for Renewable Systems written by Samuel Vasconcelos Araújo and published by kassel university press GmbH. This book was released on 2013-06-13 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book IEEE Standard Specification Format Guide and Test Procedure for Single axis Interferometric Fiber Optic Gyros written by and published by . This book was released on 1998 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: Specification and test requirements for a single-axis interferometric fiber optic gyro (IFOG) for use as a sensor in attitude control systems, angular rate measuring systems are defined. A standard specification format guide for the preparation of a single-axis IFOG is provided. A compilation of recommended procedures for testing a fiber optic gyro, derived from those presently used in the industry, is also provided.

Download or read book Silicon Carbide a High Temperature Semiconductor written by Joseph R. O'Connor and published by . This book was released on 1960 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Static and Turn On Switching Characteristics of 4h Silicon Carbide Sits to 200 Deg C written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-24 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Test results are presented for normally-off 4H-SiC Static Induction Transistors (SITs) intended for power switching and are among the first normally-off such devices realized in SiC. At zero gate bias, the gate p-n junction depletion layers extend far enough into the conduction channel to cut off the channel. Application of forward gate bias narrows the depletion regions, opening up the channel to conduction by majority carriers. In the present devices, narrow vertical channels get pinched by depletion regions from opposite sides. Since the material is SiC, the devices are usable at temperatures above 150 C. Static curve and pulse mode switching observations were done at selected temperatures up to 200 C on a device with average static characteristics from a batch of similar devices. Gate and drain currents were limited to about 400 mA and 3.5 A, respectively. The drain voltage was limited to roughly 300 V, which is conservative for this 600 V rated device. At 23 C, 1 kW, or even more, could be pulse mode switched in 65 ns (10 to 90 percent) into a 100 load. But at 200 C, the switching capability is greatly reduced in large part by the excessive gate current required. Severe collapse of the saturated drain-to-source current was observed at 200 C. The relation of this property to channel mobility is reviewed. Niedra, Janis M. and Schwarze, Gene E. Glenn Research Center NASA/TM-2005-213996, AIAA Paper 2005-5718, E-15320

Download or read book Quality Reliability Security and Robustness in Heterogeneous Networks written by Karan Singh and published by Springer. This book was released on 2013-07-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 9th International Conference on Heterogeneous Networking for Quality, Reliability, Security and Robustness, QShine 2013, which was held in National Capital Region (NCR) of India during January 2013. The 87 revised full papers were carefully selected from 169 submissions and present the recent technological developments in broadband high-speed networks, peer-to-peer networks, and wireless and mobile networks.

Download or read book Insulated Gate Bipolar Transistor IGBT Theory and Design written by Vinod Kumar Khanna and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and "state-of-the-art" coverage of the design and fabrication of IGBT. All-in-one resource Explains the fundamentals of MOS and bipolar physics. Covers IGBT operation, device and process design, power modules, and new IGBT structures.

Download or read book Syrups and Molasses written by George L. Teller and published by . This book was released on 1895 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book III nitride Devices and Nanoengineering written by Zhe Chuan Feng and published by World Scientific. This book was released on 2008 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: Devices, nanoscale science and technologies based on GaN and related materials, have achieved great developments in recent years. New GaN-based devices such as UV detectors, fast p-HEMT and microwave devices are developed far more superior than other semiconductor materials-based devices.Written by renowned experts, the review chapters in this book cover the most important topics and achievements in recent years, discuss progress made by different groups, and suggest future directions. Each chapter also describes the basis of theory and experiment.This book is an invaluable resource for device design and processing engineers, material growers and evaluators, postgraduates and scientists as well as newcomers in the GaN field.

Download or read book Power Electronics and Motor Drives written by Bogdan M. Wilamowski and published by CRC Press. This book was released on 2011-02-28 with total page 1015 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Electronics Handbook, Second Edition combines traditional and newer, more specialized knowledge that will help industrial electronics engineers develop practical solutions for the design and implementation of high-power applications. Embracing the broad technological scope of the field, this collection explores fundamental areas, including analog and digital circuits, electronics, electromagnetic machines, signal processing, and industrial control and communications systems. It also facilitates the use of intelligent systems—such as neural networks, fuzzy systems, and evolutionary methods—in terms of a hierarchical structure that makes factory control and supervision more efficient by addressing the needs of all production components. Enhancing its value, this fully updated collection presents research and global trends as published in the IEEE Transactions on Industrial Electronics Journal, one of the largest and most respected publications in the field. Power Electronics and Motor Drives facilitates a necessary shift from low-power electronics to the high-power varieties used to control electromechanical systems and other industrial applications. This volume of the handbook: Focuses on special high-power semiconductor devices Describes various electrical machines and motors, their principles of operation, and their limitations Covers power conversion and the high-efficiency devices that perform the necessary switchover between AC and DC Explores very specialized electronic circuits for the efficient control of electric motors Details other applications of power electronics, aside from electric motors—including lighting, renewable energy conversion, and automotive electronics Addresses power electronics used in very-high-power electrical systems to transmit energy Other volumes in the set: Fundamentals of Industrial Electronics Control and Mechatronics Industrial Communication Systems Intelligent Systems

Download or read book Pulse Circuit Technology written by Robert Gordon Middleton and published by . This book was released on 1964 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modern Power Electronic Devices written by Francesco Iannuzzo and published by Energy Engineering. This book was released on 2020-10 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power devices are key to modern power systems, performing functions such as inverting and changing voltages, buffering and switching. Following a device-centric approach, this book covers power electronic applications, semiconductor physics, materials science, application engineering, and key technologies such as MOSFET, IGBT and WBG.

Download or read book Ion Solid Interactions for Materials Modification and Processing Volume 396 written by D. B. Poker and published by . This book was released on 1996-05-23 with total page 940 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several beam-solid interaction techniques have been developed that can either stand alone or be used in connection with others for materials processing, for fabrication of devices with enhanced electro-optical and mechanical properties, and with enhanced resistance to corrosion and erosion. For example, advances in focused ion beams (FIB) have brought out-of-reach ideas and applications to fruition. This book from MRS focuses on the developments in ion-beam-assisted processing of materials and reviews successful applications of the techniques. Topics include: fundamentals of ion-solid interactions; ion-beam mixing; radiation damage; insulators and wide bandgap materials; polymers; optical materials; plasma and ion-assisted techniques; metals and tribology; focused ion beams; fundamental semiconductor processing and compound semiconductors.

Download or read book Thin Films for Photovoltaic and Related Device Applications Volume 426 written by David Ginley and published by . This book was released on 1996-11-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been considerable progress in the development of thin-film photovoltaic devices with new efficiency records and enhanced durability. These achievements are the result of significant advances in the fundamental understanding of the materials, interfaces and devices. With 18 countries represented, this truly international volume brings together engineers and researchers from academic, industrial and national laboratories worldwide to review different materials systems and address common issues and problems. A wide variety of topics related to the development of thin-film photovoltaic and related devices, including thick-film transistors and materials for flat-panel displays, are addressed. Areas of emphasis include materials synthesis, device fabrication and characterization, and modelling. Topics include: thin-film amorphous silicon devices; thin-film silicon devices; thin-film devices based on copper-indium diselenide; cadmium-telluride devices; transparent conductive oxides and related materials for thin-film devices; and novel concepts for thin-film photovoltaics.