Download or read book Silicon Carbide Microsystems for Harsh Environments written by Muthu Wijesundara and published by Springer Science & Business Media. This book was released on 2011-05-17 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods towards system level integration of components and key challenges are evaluated and discussed based on the current state of SiC materials processing and device technology. Issues such as temperature mismatch, process compatibility and temperature stability of individual components and how these issues manifest when building the system receive thorough investigation. The material covered not only reviews the state-of-the-art MEMS devices, provides a framework for the joining of electronics and MEMS along with packaging into usable harsh-environment-ready sensor modules.
Download or read book Radiation Effects in Advanced Semiconductor Materials and Devices written by C. Claeys and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This wide-ranging book summarizes the current knowledge of radiation defects in semiconductors, outlining the shortcomings of present experimental and modelling techniques and giving an outlook on future developments. It also provides information on the application of sensors in nuclear power plants.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide written by Wolfgang J. Choyke and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1997 publication of "Silicon Carbide - A Review of Fundamental Questions and Applications to Current Device Technology" edited by Choyke, et al., there has been impressive progress in both the fundamental and developmental aspects of the SiC field. So there is a growing need to update the scientific community on the important events in research and development since then. The editors have again gathered an outstanding team of the world's leading SiC researchers and design engineers to write on the most recent developments in SiC.
Download or read book Silicon Carbide and Related Materials 1995 Proceedings of the Sixth INT Conference Kyoto Japan 18 21 September 1995 written by Shin-ichi Nakashima and published by CRC Press. This book was released on 1996 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The special advantages of silicon carbide and related materials such as III-V nitrides in applications in hostile environments and for blue-light-emitting diodes continue to stimulate research and development activity. The International Conference on Silicon Carbide and related Materials is now the established forum for exchanging information on advances in this subject. This volume includes both invited and contributed papers covering the whole field of silicon carbide and related materials research, from the fundamental physics of these materials, through their growth, control of properties, characterization, surface and interface modification, device processing and fabrication, to simulation and modelling. Materials scientists, electronic engineers and solid state physicists who work with these materials, as well as those who are contemplating research in this expanding field, will find this a unique single source of information.
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-09-23 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Carbide and Related Materials written by and published by . This book was released on 1996 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Application of Accelerators in Research and Industry written by Jerome L. Duggan and published by American Institute of Physics. This book was released on 2003-10-21 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: These papers were peer reviewed before publication. This conference covers the use of particle accelerators in research and industry. The research applications include basic atomic and nuclear physics studies with ion beams of energies less than 10 million volts. The applications include the use of ion beams for the analysis of materials. In the proceedings, experiments are outlined for Rutherford Backscattering analysis, particle induced x-ray emission, nuclear reaction analysis and neutron activation analysis. There are also sessions devoted to accelerator technology and the development of new spectrometers and detectors. The meeting also covers radiation processing with electron beams. These topics include cross-linking, sterilization of medical disposables and food preservation by radiation. The conference also includes a medical symposium on the production and use of medical radioisotopes and a symposium on ion implantation primarily for the semiconductor industry.
Download or read book Silicon Carbide and Related Materials 2004 written by Roberta Nipoti and published by . This book was released on 2005 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Carbide (SiC), Gallium Nitride (GaN) and Diamond are examples of wide-bandgap semiconductors having chemical, electrical and optical properties which make them very attractive for the fabrication of high-power and high-frequency electronic devices, as well as of light-emitters and sensors which have to operate under harsh conditions. The book comprises the proceedings of the 5th edition of the European Conference on Silicon Carbide and Related Materials, held from the 31st August to the 4th September 2004 in Bologna, Italy. This conference series here continued its tradition of being the main European forum for exchanging results, and discussing progress, between those university and industry researchers who are most active in the fields of SiC and related materials. Attendees at the conference highlighted the progress made in material growth technology, characterization of material properties and technological processing for electronic applications. Many electronics devices were presented: including high-voltage, high power-density and high-temperature components; as well as microwave components. Radiation-hard sensors were also presented.These proceedings fully document the latest experimental and theoretical understanding of the growth of bulk and epitaxial layers, the properties of the resultant materials, the development of suitable processes and of electronic devices that can best exploit and benefit from the outstanding physical properties that are offered by wide-bandgap materials.
Download or read book Ceramic Abstracts written by and published by . This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book KURRI Progress Report written by Kyōto Daigaku. Genshiro Jikkenjo and published by . This book was released on 2002 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductors written by and published by . This book was released on 2008 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Nuclear Materials written by and published by Elsevier. This book was released on 2020-07-22 with total page 4871 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials in a nuclear environment are exposed to extreme conditions of radiation, temperature and/or corrosion, and in many cases the combination of these makes the material behavior very different from conventional materials. This is evident for the four major technological challenges the nuclear technology domain is facing currently: (i) long-term operation of existing Generation II nuclear power plants, (ii) the design of the next generation reactors (Generation IV), (iii) the construction of the ITER fusion reactor in Cadarache (France), (iv) and the intermediate and final disposal of nuclear waste. In order to address these challenges, engineers and designers need to know the properties of a wide variety of materials under these conditions and to understand the underlying processes affecting changes in their behavior, in order to assess their performance and to determine the limits of operation. Comprehensive Nuclear Materials, Second Edition, Seven Volume Set provides broad ranging, validated summaries of all the major topics in the field of nuclear material research for fission as well as fusion reactor systems. Attention is given to the fundamental scientific aspects of nuclear materials: fuel and structural materials for fission reactors, waste materials, and materials for fusion reactors. The articles are written at a level that allows undergraduate students to understand the material, while providing active researchers with a ready reference resource of information. Most of the chapters from the first Edition have been revised and updated and a significant number of new topics are covered in completely new material. During the ten years between the two editions, the challenge for applications of nuclear materials has been significantly impacted by world events, public awareness, and technological innovation. Materials play a key role as enablers of new technologies, and we trust that this new edition of Comprehensive Nuclear Materials has captured the key recent developments. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environments Comprehensive resource for up-to-date and authoritative information which is not always available elsewhere, even in journals Provides an in-depth treatment of materials modeling and simulation, with a specific focus on nuclear issues Serves as an excellent entry point for students and researchers new to the field
Download or read book Physics and Technology of Silicon Carbide Devices written by George Gibbs and published by . This book was released on 2016-10-01 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon (Si) is by far the most widely used semiconductor material for power devices. On the other hand, Si-based power devices are approaching their material limits, which has provoked a lot of efforts to find alternatives to Si-based power devices for better performance. With the rapid innovations and developments in the semiconductor industry, Silicon Carbide (SiC) power devices have progressed from immature prototypes in laboratories to a viable alternative to Si-based power devices in high-efficiency and high-power density applications. SiC devices have numerous persuasive advantages--high-breakdown voltage, high-operating electric field, high-operating temperature, high-switching frequency and low losses. Silicon Carbide (SiC) devices belong to the so-called wide band gap semiconductor group, which offers a number of attractive characteristics for high voltage power semiconductors when compared to commonly used silicon (Si). Recently, some SiC power devices, for example, Schottky-barrier diodes (SBDs), metal-oxide-semiconductor field-effecttransistors (MOSFETs), junction FETs (JFETs), and their integrated modules have come onto the market. Physics and Technology of Silicon Carbide Devices abundantly describes recent technologies on manufacturing, processing, characterization, modeling, etc. for SiC devices.
