Download or read book Electric and Hybrid Vehicles written by Tom Denton and published by Routledge. This book was released on 2016-04-06 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book on electric and hybrid vehicles (EVs) written specifically for automotive students and vehicle owners Clear diagrams, photos and flow charts outline the charging infrastructure, how EV technology works, and how to repair and maintain hybrid and electric vehicles Optional IMI online eLearning materials enable students to study the subject further and test their knowledge Full coverage of IMI Level 2 Award in Hybrid Electric Vehicle Operation and Maintenance, IMI Level 3 Award in Hybrid Electric Vehicle Repair and Replacement, IMI Accreditation, C&G and other EV/Hybrid courses. The first book on electric and hybrid vehicles (endorsed by the IMI) starts with an introduction to the market, covering the different types of electric vehicle, costs and emissions, and the charging infrastructure, before moving on to explain how hybrid and electric vehicles work. A chapter on electrical technology introduces learners to subjects such as batteries, control systems and charging which are then covered in more detail within their own chapters. The book also covers the maintenance and repair procedures of these vehicles, including fault finding, servicing, repair and first-responder information. Case studies are used throughout to illustrate different technologies.
Download or read book Electric and Hybrid Vehicle Maintenance written by Grants McBride and published by Independently Published. This book was released on 2024-02-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric and Hybrid Vehicle maintenance A Thrilling Dive into Hybrid and Electric Car Maintenance Applicable For Ford, Toyota, Chevrolet, Nissan and Benz Buckle up for an electrifying ride into the future of automotive innovation with our ultimate guide to hybrid and electric car maintenance. Get ready to shift into high gear as we explore the cutting-edge technology, eco-friendly features, and unmatched performance of these game-changing vehicles. Prepare to be dazzled by the sleek designs and futuristic capabilities of electric cars as we uncover the secrets behind their silent powertrains and zero-emission journeys. From the adrenaline-pumping acceleration of electric motors to the seamless blending of petrol and electricity in hybrid vehicles, every turn of the page reveals a new revelation in automotive excellence. But the excitement doesn't stop there. Dive deep into the heart of maintenance as we uncover the hidden gems of regenerative braking, intelligent engine management, and battery breakthroughs that are reshaping the automotive landscape. Discover the thrill of saying goodbye to oil changes and hello to lower maintenance costs, all while reducing your carbon footprint and leaving a lasting impact on the planet. Join us on this exhilarating adventure as we navigate the twists and turns of hybrid and electric car ownership, from exploring your options at the Chevy Service Center to taking the wheel for an unforgettable test drive. Whether you're a seasoned enthusiast or a curious newcomer, this guide is your ticket to a future where sustainability meets excitement on every mile of the road. Get ready to rev up your engines and ignite your passion for innovation as we embark on a journey to electrify the road ahead. The future of driving has never looked brighter - let's hit the road and make history together!
Download or read book Hybrid Electric Vehicle Technology written by Automotive Research and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Electric Vehicle Technology provides foundational information about vehicles that use more than one propulsion technology to power a drive system. This textbook is filled with technical illustrations and concise descriptions of the different configurations and vehicle platforms, the operation of various systems and the technologies involved, and the maintenance of hybrid electric vehicles. Safety precautions required used when working around high-voltage vehicle systems, especially in emergencies, are highlighted.
Download or read book Electric and Hybrid Vehicles written by Tom Denton and published by Taylor & Francis. This book was released on 2024-01-25 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric and hybrid vehicles are now the present, not the future. This straightforward and highly illustrated full-colour textbook is endorsed by the Institute of the Motor Industry (IMI) and introduces the subject for further education and undergraduate students as well as technicians and workshop owners, with sections for drivers who are interested to know more. This new edition contains extensively updated content, especially on batteries, charging and the high-voltage pathway and includes all new case studies and new images, photos and flow charts throughout. It covers the different types of electric vehicle, costs and emissions and the charging infrastructure before moving on to explain how hybrid and electric vehicles work. A chapter on electrical technology introduces learners to subjects such as batteries, control systems and charging, which are then covered in more detail within their own chapters. The book also covers the maintenance and repair procedures of these vehicles, including diagnostics, servicing, repair and first-responder information. The book is particularly suitable for students studying towards IMI Level 1 Award in Hybrid Electric Vehicle Awareness, IMI Level 2 Award in Hybrid Electric Vehicle Operation and Maintenance, IMI Level 3 Award in Hybrid Electric Vehicle Repair and Replacement, IMI Level 4 Award in the Diagnosis, Testing and Repair of Electric/Hybrid Vehicles and Components, IMI accreditation, City & Guilds (C&G) and all other EV/hybrid courses.
Download or read book Electric and Hybrid Vehicles written by Iqbal Husain and published by CRC Press. This book was released on 2021-02-22 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thoroughly revised third edition of this widely praised, bestselling textbook presents a comprehensive systems-level perspective of electric and hybrid vehicles with emphasis on technical aspects, mathematical relationships and basic design guidelines. The emerging technologies of electric vehicles require the dedication of current and future engineers, so the target audience for the book is the young professionals and students in engineering eager to learn about the area. The book is concise and clear, its mathematics are kept to a necessary minimum and it contains a well-balanced set of contents of the complex technology. Engineers of multiple disciplines can either get a broader overview or explore in depth a particular aspect of electric or hybrid vehicles. Additions in the third edition include simulation-based design analysis of electric and hybrid vehicles and their powertrain components, particularly that of traction inverters, electric machines and motor drives. The technology trends to incorporate wide bandgap power electronics and reduced rare-earth permanent magnet electric machines in the powertrain components have been highlighted. Charging stations are a critical component for the electric vehicle infrastructure, and hence, a chapter on vehicle interactions with the power grid has been added. Autonomous driving is another emerging technology, and a chapter is included describing the autonomous driving system architecture and the hardware and software needs for such systems. The platform has been set in this book for system-level simulations to develop models using various softwares used in academia and industry, such as MATLAB®/Simulink, PLECS, PSIM, Motor-CAD and Altair Flux. Examples and simulation results are provided in this edition using these software tools. The third edition is a timely revision and contribution to the field of electric vehicles that has reached recently notable markets in a more and more environmentally sensitive world.
Download or read book Electric and Hybrid Cars written by Curtis D. Anderson and published by McFarland. This book was released on 2010-03-30 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This illustrated history chronicles electric and hybrid cars from the late 19th century to today's fuel cell and plug-in automobiles. It describes the politics, technology, marketing strategies, and environmental issues that have impacted electric and hybrid cars' research and development. The important marketing shift from a "woman's car" to "going green" is discussed. Milestone projects and technologies such as early batteries, hydrogen and bio-mass fuel cells, the upsurge of hybrid vehicles, and the various regulations and market forces that have shaped the industry are also covered.
Download or read book Electric and Hybrid Vehicles written by Gianfranco Pistoia and published by Elsevier. This book was released on 2010-07-27 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric and Hybrid Vehicles: Power Sources, Models, Sustainability, Infrastructure and the Market reviews the performance, cost, safety, and sustainability of battery systems for hybrid electric vehicles (HEVs) and electric vehicles (EVs), including nickel-metal hydride batteries and Li-ion batteries. Throughout this book, especially in the first chapters, alternative vehicles with different power trains are compared in terms of lifetime cost, fuel consumption, and environmental impact. The emissions of greenhouse gases are particularly dealt with. The improvement of the battery, or fuel cell, performance and governmental incentives will play a fundamental role in determining how far and how substantial alternative vehicles will penetrate into the market. An adequate recharging infrastructure is of paramount importance for the diffusion of vehicles powered by batteries and fuel cells, as it may contribute to overcome the so-called range anxiety."" Thus, proposed battery charging techniques are summarized and hydrogen refueling stations are described. The final chapter reviews the state of the art of the current models of hybrid and electric vehicles along with the powertrain solutions adopted by the major automakers. Contributions from the worlds leading industry and research experts Executive summaries of specific case studies Information on basic research and application approaches
Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2011-05-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Hybrid Electric Vehicles provides vital guidance to help a new generation of engineers master the principles of and further advance hybrid vehicle technology. The authors address purely electric, hybrid electric, plug-in hybrid electric, hybrid hydraulic, fuel cell, and off-road hybrid vehicle systems. They focus on the power and propulsion systems for these vehicles, including issues related to power and energy management. They concentrate on material that is not readily available in other hybrid electric vehicle (HEV) books such as design examples for hybrid vehicles, and cover new developments in the field including electronic CVT, plug-in hybrid, and new power converters and controls. Covers hybrid vs. pure electric, HEV system architecture (including plug-in and hydraulic), off-road and other industrial utility vehicles, non-ground-vehicle applications like ships, locomotives, aircrafts, system reliability, EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Contains core fundamentals and principles of modern hybrid vehicles at component level and system level. Provides graduate students and field engineers with a text suitable for classroom teaching or self-study.
Download or read book Advanced Automotive Fault Diagnosis written by Tom Denton and published by Routledge. This book was released on 2006-08-14 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnostics, or fault finding, is a fundamental part of an automotive technician's work, and as automotive systems become increasingly complex there is a greater need for good diagnostic skills. Advanced Automotive Fault Diagnosis is the only book to treat automotive diagnostics as a science rather than a check-list procedure. Each chapter includes basic principles and examples of a vehicle system followed by the appropriate diagnostic techniques, complete with useful diagrams, flow charts, case studies and self-assessment questions. The book will help new students develop diagnostic skills and help experienced technicians improve even further. This new edition is fully updated to the latest technological developments. Two new chapters have been added – On-board diagnostics and Oscilloscope diagnostics – and the coverage has been matched to the latest curricula of motor vehicle qualifications, including: IMI and C&G Technical Certificates and NVQs; Level 4 diagnostic units; BTEC National and Higher National qualifications from Edexcel; International Motor Vehicle qualifications such as C&G 3905; and ASE certification in the USA.
Download or read book Advanced Hybrid Automotive Systems written by Mandy Concepcion and published by Createspace Independent Pub. This book was released on 2011 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role of the modern automotive technician has changed drastically in the past decade. The job of today's vehicle specialist involves a deep knowledge of a wide variety of technical disciplines. Few professions encompass such a diverse understanding of technology. The automotive technician is now expected to know about chemistry, electronics, mechanics, optics, as well as posses a deep analytical mind. The last only comes with time and experience. Advanced HYBRID Vehicle Systems (vol 1), Including Toyota & Honda models By Mandy Concepcion Table of Contents CHAPTER 1 (Hybrid Basics and Safety Procedures) The Need for Hybrid Systems Hybrid Do's and Dont's Here are some definite do's Hybrid basics and safety procedures Hybrid power down procedure and deactivation High voltage measurement and equipment Humidity and high-voltage CHAPTER 2 (Hybrid Aerodynamics and Low Friction Tires) Low friction components and non-belt driven coolant pump, and air conditioning compressor The AC system EPS system, or electric power steering Replacement of the actual electric motor Performing a zero rest procedure CHAPTER 3 (Advanced Electronics for Hybrids) The dangers of amperage and High Current Circuits Current measurements using an electromagnetic probe (clamp on) Voltage measurement on hybrid vehicles (advanced concepts) Measure the high voltage circuit at the orange cables after a power down procedure The Dropping Resistors CHAPTER 4 (Basic Electric Motor and Power Generation) Principle of Induction Electric Motors and Electric Alternating Current The DC Electric Motor The AC Electric Motor Important facts about electric hybrid motor generator units Typical hybrid motor generator Dangers of Inverter Internal Capacitors Motor Commutation Plates Hybrid Motor Position Sensor Motor control techniques Difference between a hybrid vehicle electrical motor and a regular AC motor The TRIAC and IGBT (Isolated Gate Bipolar Transistor) Hybrid Regenerative Breaking CHAPTER 5 (AC and DC Power Units of Measurements) Frequency measurements Phase Measurement Voltage Measurements Using a Clamp-On AMP Probe The 3 Phases of a HYBRID Motor (U, V, W) The Inverter Unit on the Prius DC Brushless Motors CHAPTER 6 (basic battery technology) The nickel metal hydride battery The lithium ion battery Toyota Prius high Voltage battery Ultra-Capacitors V R L A or variable regulation lead acid battery CHAPTER 7 (The 6 Hybrid Modes of Operation) HYBRID Computer System Control Light Acceleration Mode Regenerative Breaking Mode Deceleration Mode Normal Driving Mode STOP Mode M1's Biggest Contribution to the HYBRID Unit CHAPTER 8 (Parallel and Series Hybrid Systems) Series hybrid system Series, parallel, and series/parallel hybrid Inverter Power Management Parallel hybrid system Parallel/Series hybrid system Toyota motor Co. and AISIN CHAPTER 9 (The Prius CVT or continuously variable transmission) THS or hybrid synergy Drive Transmission Planetary Gears Key point to understanding the way this transmission works HONDA CVT Transmission Honda's Cylinder Deactivation Honda's Electric Balancing CHAPTER 10 (Toyota specific hybrid system) Specific concepts on the Toyota hybrid Problems with the Coolant Pump Gas Tank Rubber Bladder Car Off AC System The Scanner and the HYBRID System High Voltage Battery MG1 and MG2 Power Output The Toyota auxiliary 12 V battery How to Jump Start a HYBRID A Word About Toyota's Keyless Entry Dangers of Electric Mode Driving CHAPTER 11 (Honda specific hybrid system) The Honda hybrid system is vastly different than that of Toyota HONDA Hybrid is a Simple Design IMA or integrated motor assist The Motor Generator Unit The 12 volt Starter Honda Electronic Balancing The 1.3L Engine Soft iridium spark plugs Honda Civic Complete Cylinder Deactivation
Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2017-11-29 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest developments in the field of hybrid electric vehicles Hybrid Electric Vehicles provides an introduction to hybrid vehicles, which include purely electric, hybrid electric, hybrid hydraulic, fuel cell vehicles, plug-in hybrid electric, and off-road hybrid vehicular systems. It focuses on the power and propulsion systems for these vehicles, including issues related to power and energy management. Other topics covered include hybrid vs. pure electric, HEV system architecture (including plug-in & charging control and hydraulic), off-road and other industrial utility vehicles, safety and EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Hybrid Electric Vehicles, Second Edition is a comprehensively updated new edition with four new chapters covering recent advances in hybrid vehicle technology. New areas covered include battery modelling, charger design, and wireless charging. Substantial details have also been included on the architecture of hybrid excavators in the chapter related to special hybrid vehicles. Also included is a chapter providing an overview of hybrid vehicle technology, which offers a perspective on the current debate on sustainability and the environmental impact of hybrid and electric vehicle technology. Completely updated with new chapters Covers recent developments, breakthroughs, and technologies, including new drive topologies Explains HEV fundamentals and applications Offers a holistic perspective on vehicle electrification Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives, Second Edition is a great resource for researchers and practitioners in the automotive industry, as well as for graduate students in automotive engineering.
Download or read book Understanding Hybrid and Electric Vehicle Service and Technology written by Craig Van Batenburg and published by . This book was released on 2013-02-15 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Hybrid and Electric Vehicle book, now in its 10th version, is written by Craig Van Batenburg, who for 25 years was repairing vehicles at his independent repair shop adding HEVs in 2000. Today the 2013 edition is packed with chapters on every hybrid and electric vehicle sold in North America along with popular European models. EVs are included along with charts on HV battery location, battery voltage levels, service plug locations, service mode, and much more. An air conditioning section has been added, as well as a section on home chargers for electric cars. Designed as a technician’s time saver, only ACDC has this knowledge consolidated in one place for all models. The beginning of the book explains, in simple technician language, what makes a hybrid different from a conventional car. Safety is covered in great detail. Even “Do-It-Yourselfers” will find this book very helpful as it keeps them busy on their HEV, but leaves for the professional, the work that is safer or too technical for the average DIY. The book has more than 330-pages and is bound to lie flat on a workbench for easy reading. This book does NOT take the place of service information, like a shop manual or Internet OEM information. What it does, is make the service information understandable by using common 12-volt language and a glossary so that well-trained 12-volt technicians can make the transition to high-voltage quickly, and with less confusion. ACDC is proud of this publication and ships worldwide.
Download or read book The Electric Car written by Michael Hereward Westbrook and published by IET. This book was released on 2001 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable work has gone into electric car and battery development in the last ten years, with the prospect of substantial improvements in range and performance in battery cars as well as in hybrids and those using fuel cells. This book covers the development of electric cars, from their early days, to new hybrid models in production. Most of the coverage is focused on the very latest technological issues faced by automotive engineers working on electric cars, as well as the key business factors vital for the successful transfer of electric cars into the mass market.
Download or read book Endurance WEC written by Ricardo Romanelli and published by Giorgio NADA Editore. This book was released on 2021-02-09 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electric and Hybrid Vehicles written by Amir Khajepour and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level introductory book covering fundamental aspects, design and dynamics of electric and hybrid electric vehicles There is significant demand for an understanding of the fundamentals, technologies, and design of electric and hybrid electric vehicles and their components from researchers, engineers, and graduate students. Although there is a good body of work in the literature, there is still a great need for electric and hybrid vehicle teaching materials. Electric and Hybrid Vehicles: Technologies, Modeling and Control – A Mechatronic Approach is based on the authors’ current research in vehicle systems and will include chapters on vehicle propulsion systems, the fundamentals of vehicle dynamics, EV and HEV technologies, chassis systems, steering control systems, and state, parameter and force estimations. The book is highly illustrated, and examples will be given throughout the book based on real applications and challenges in the automotive industry. Designed to help a new generation of engineers needing to master the principles of and further advances in hybrid vehicle technology Includes examples of real applications and challenges in the automotive industry with problems and solutions Takes a mechatronics approach to the study of electric and hybrid electric vehicles, appealing to mechanical and electrical engineering interests Responds to the increase in demand of universities offering courses in newer electric vehicle technologies
Download or read book The Ultimate Hybrid Vehicle Maintenance Handbook written by Mohamed Lamaachi and published by Independently Published. This book was released on 2024-03-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are about a billion cars on the world's roads, 99% of which are driven by internal combustion engines (ICE). But for useful operation, internal combustion engines use only a third of the energy of the burned fuel. The rest is lost in the heat and friction of the mechanisms and in the resistance to the movement of the car. This book aims to generalize the experience of manufacturers and enterprises servicing hybrid vehicles. The introduction provides an overview of the existing hybrid car market, discusses in detail the general structure and technical characteristics of hybrid cars, the features and operation of the internal combustion engine together with an inverter and a high-voltage battery, and shows a special design of the transmission and braking system. Labor protection measures during maintenance and repair are indicated. In working on the manuscript, the author used open printed materials from manufacturers, dealers and service stations, as well as the results of their own design work and research on the operation of hybrid cars. The advantages of hybrid cars indicated by manufacturers are controversial, often not objective. This reduces their popularity and prevents them from attracting mass consumers.
Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2017-09-11 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest developments in the field of hybrid electric vehicles Hybrid Electric Vehicles provides an introduction to hybrid vehicles, which include purely electric, hybrid electric, hybrid hydraulic, fuel cell vehicles, plug-in hybrid electric, and off-road hybrid vehicular systems. It focuses on the power and propulsion systems for these vehicles, including issues related to power and energy management. Other topics covered include hybrid vs. pure electric, HEV system architecture (including plug-in & charging control and hydraulic), off-road and other industrial utility vehicles, safety and EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Hybrid Electric Vehicles, Second Edition is a comprehensively updated new edition with four new chapters covering recent advances in hybrid vehicle technology. New areas covered include battery modelling, charger design, and wireless charging. Substantial details have also been included on the architecture of hybrid excavators in the chapter related to special hybrid vehicles. Also included is a chapter providing an overview of hybrid vehicle technology, which offers a perspective on the current debate on sustainability and the environmental impact of hybrid and electric vehicle technology. Completely updated with new chapters Covers recent developments, breakthroughs, and technologies, including new drive topologies Explains HEV fundamentals and applications Offers a holistic perspective on vehicle electrification Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives, Second Edition is a great resource for researchers and practitioners in the automotive industry, as well as for graduate students in automotive engineering.
