Download or read book Elastoplastic Problems of the Theory of Plates and Shells written by L. M. Kachanov and published by . This book was released on 1968 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report discusses the papers presented on the elastic-plastic equilibrium of plates and shells. (Author).
Download or read book Elasto Plastic and Damage Analysis of Plates and Shells written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2008-07-23 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shells and plates are critical structures in numerous engineering applications. Analysis and design of these structures is of continuing interest to the scienti c and engineering communities. Accurate and conservative assessments of the maximum load carried by a structure, as well as the equilibrium path in both the elastic and inelastic range, are of paramount importance to the engineer. The elastic behavior of shells has been closely investigated, mostly by means of the nite element method. Inelastic analysis however, especially accounting for damage effects, has received much less attention from researchers. In this book, we present a computational model for nite element, elasto-plastic, and damage analysis of thin and thick shells. Formulation of the model proceeds in several stages. First, we develop a theory for thick spherical shells, providing a set of shell constitutive equations. These equations incorporate the effects of transverse shear deformation, initial curvature, and radial stresses. The proposed shell equations are conveniently used in nite element analysis. 0 AsimpleC quadrilateral, doubly curved shell element is developed. By means of a quasi-conforming technique, shear and membrane locking are prevented. The element stiffness matrix is given explicitly, making the formulation computationally ef cient. We represent the elasto-plastic behavior of thick shells and plates by means of the non-layered model, using an Updated Lagrangian method to describe a small-strain geometric non-linearity. For the treatment of material non-linearities, we adopt an Iliushin’s yield function expressed in terms of stress resultants, with isotropic and kinematic hardening rules.
Download or read book Theory of Plates and Shells written by Stephen Timoshenko and published by McGraw-Hill Publishing Company. This book was released on 1959 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theories of Plates and Shells written by Reinhold Kienzler and published by Springer Science & Business Media. This book was released on 2013-06-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and shell theories experienced a renaissance in recent years. The potentials of smart materials, the challenges of adaptive structures, the demands of thin-film technologies and more on the one hand and the availability of newly developed mathematical tools, the tremendous increase in computer facilities and the improvement of commercial software packages on the other caused a reanimation of the scientific interest. In the present book the contributions of the participants of the EUROMECH Colloquium 444 "Critical Review of the Theories of Plates and Shells and New Applications" have been collected. The aim was to discuss the common roots of different plate and shell approaches, to review the current state of the art, and to develop future lines of research. Contributions were written by scientists with civil and mechanical engineering as well as mathematical and physical background.
Download or read book Theory of Plates and Shells written by Christian Mittelstedt and published by Springer Nature. This book was released on 2023-06-18 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the analysis of plates and shells and is divided into four sections. After briefly introducing the basics of elasticity theory and the energy methods of elastostatics in the first section, the second section is devoted to the statics of disk structures. In addition to isotropic disks in Cartesian and polar coordinates, approximation methods and anisotropic disks are also discussed. The following third section deals with plate structures, covering plates in Cartesian and polar coordinates, and also discussing approximation methods and higher-order plate theories. Other chapters in this section discuss plate buckling as well as geometric nonlinear analysis and laminated plates. The fourth and final section of this book is devoted to shells, i.e., curved thin structures, following the common division into membrane theory on the one hand and bending theory on the other hand. This book is intended for students at universities, but also for engineers in practice and researchers in engineering science.
Download or read book Stability problems of elasto plastic plates and shells by finite elements written by Urs Trueb and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Analysis of Elastic Plates and Shells Second Edition written by J. N. Reddy and published by CRC Press. This book was released on 2006-11-20 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because plates and shells are common structural elements in aerospace, automotive, and civil engineering structures, engineers must understand the behavior of such structures through the study of theory and analysis. Compiling this information into a single volume, Theory and Analysis of Elastic Plates and Shells, Second Edition presents a complete, up-to-date, and unified treatment of classical and shear deformation plates and shells, from the basic derivation of theories to analytical and numerical solutions. Revised and updated, this second edition incorporates new information in most chapters, along with some rearrangement of topics to improve the clarity of the overall presentation. The book presents new material on the theory and analysis of shells, featuring an additional chapter devoted to the topic. The author also includes new sections that address Castigliano's theorems, axisymmetric buckling of circular plates, the relationships between the solutions of classical and shear deformation theories, and the nonlinear finite element analysis of plates. The book provides many illustrations of theories, formulations, and solution methods, resulting in an easy-to-understand presentation of the topics. Like the previous edition, this book remains a suitable textbook for a course on plates and shells in aerospace, civil, and mechanical engineering curricula and continues to serve as a reference for industrial and academic structural engineers and scientists.
Download or read book A Theory of Latticed Plates and Shells written by G. I. Pshenichnov and published by World Scientific. This book was released on 1993 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents the theory of latticed shells as continual systems and describes its applications. It analyses the problems of statics, stability and dynamics. Generally, a classical rod deformation theory is applied. However, in some instances, more precise theories which particularly consider geometrical and physical nonlinearity are employed. A new effective method for solving general boundary value problems and its application for numerical and analytical solutions of mathematical physics and reticulated shell theory problems is described. A new method of solving the shell theory's nonlinear problems, substantially simplifying the existing algorithms is given. Questions of optimum design are discussed. Some of the findings are generalized and extended to edged and composite systems. The results of the solutions of a wide range of pressing problems are presented.
Download or read book Introduction to Plate and Shell Theory written by Cedric Edward Turner and published by . This book was released on 1965 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in the Theory of Plates and Shells written by George Voyiadjis and published by Elsevier. This book was released on 2013-10-22 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plates and shells play an important role in structural, mechanical, aerospace and manufacturing applications. The theory of plates and shells have advanced in the past two decades to handle more complicated problems that were previously beyond reach. In this book, the most recent advances in this area of research are documented. These include topics such as thick plate and shell analyses, finite rotations of shell structures, anisotropic thick plates, dynamic analysis, and laminated composite panels. The book is divided into two parts. In Part I, emphasis is placed on the theoretical aspects of the analysis of plates and shells, while Part II deals with modern applications. Numerous eminent researchers in the various areas of plate and shell analyses have contributed to this work which pays special attention to aspects of research such as theory, dynamic analysis, and composite plates and shells.
Download or read book Stability Analysis of Plates and Shells written by and published by . This book was released on 1998 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stresses in Plates and Shells written by A. C. Ugural and published by McGraw-Hill Companies. This book was released on 1981 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its easy writing style, this is the most accessible book on the market. It provides comprehensive coverage of both plates and shells and a unique blend of modern analytical and computer-oriented numerical methods in presenting stress analysis in a realistic setting. Distinguished by its broad range of exceptional visual interpretations of the solutions, applications, and means by which loads are carried in beams, plates and shells. Combining the modern-numerical, mechanics of materials, and theory of elasticity methods of analysis, it provides an in-depth and complete coverage of the subject, not explored by other texts. Its flexible organization allows instructors to more easily pick and choose topics they want to cover, depending on their course needs. Students are exposed to both the theory and the latest applications to various structural elements. Two new chapters on the fundamentals provide a stronger foundation for understanding the material. An increased emphasis on computer tools, and updated problems, examples, and references, expose students to the latest information in the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 1572 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Limit Analysis of Plates Shells and Disks written by M.A. Save and published by Elsevier. This book was released on 1997-12-18 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and updated edition of a book first published in 1972 has kept the general features of the first edition but as could be expected after two decades there are also substantial differences. For instance optimal design has been completely deleted as the developments in this field have been so great that it warrants a book in itself. The fundamental concepts based on Drucker's postulate rather than those of Prager's assumptions function have been introduced. Problems of cyclic loading have been given some more extensive treatment, both in the general theory and in applications. General indications and references have been added for reinforced concrete plates and shells. A general presentation of the yield condition for both plates and shells has been included and the section on the influence of axial force in plates has been almost re-written. Finally, a chapter has been added exclusively devoted to the numerical approach to limit load and shake-down load evaluation. Like the previous edition the book is directed towards engineering applications. The theory is rigorously developed and is therefore of great use to engineering students in plastic limit analysis. Furthermore, applications to metal and reinforced concrete plates and shells and to metal disks are treated by both analytical and numerical approaches.
Download or read book Plate and Shell Structures written by Maria Radwańska and published by John Wiley & Sons. This book was released on 2017-02-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate and Shell Structures: Selected Analytical and Finite Element Solutions Maria Radwañska, Anna Stankiewicz, Adam Wosatko, Jerzy Pamin Cracow University of Technology, Poland Comprehensively covers the fundamental theory and analytical and numerical solutions for different types of plate and shell structures Plate and Shell Structures: Selected Analytical and Finite Element Solutions not only provides the theoretical formulation of fundamental problems of mechanics of plates and shells, but also several examples of analytical and numerical solutions for different types of shell structures. The book contains advanced aspects related to stability analysis and a brief description of modern finite element formulations for plates and shells, including the discussion of mixed/hybrid models and locking phenomena. Key features: 52 example problems solved and illustrated by more than 200 figures, including 30 plots of finite element simulation results. Contents based on many years of research and teaching the mechanics of plates and shells to students of civil engineering and professional engineers. Provides the basis of an intermediate-level course on computational mechanics of shell structures. The book is essential reading for engineering students, university teachers, practitioners and researchers interested in the mechanics of plates and shells, as well as developers testing new simulation software.
Download or read book Nonclassical Thermoelastic Problems in Nonlinear Dynamics of Shells written by Jan Awrejcewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the reviews: "A unique feature of this book is the nice blend of engineering vividness and mathematical rigour. [...] The authors are to be congratulated for their valuable contribution to the literature in the area of theoretical thermoelasticity and vibration of plates." Journal of Sound and Vibration
Download or read book General Problems of the Theory of Plates and Envelopes written by I. I. Vorovich and published by . This book was released on 1969 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems in the following areas of the theory of plates and shells are discussed: (1) formulation of the general equations of plates and shells; (2) analysis of the accuracy of existing applied theories; (3) several general methods. Brief descriptions and discussions of the ten accepted conference papers are given, and their relationship to the general problems (in the three areas mentioned above) is discussed. These papers include topics on equations of composite sheets, behavior of cylindrical and spherical shells under various loading conditions, three-dimensional shell theory, and methods of solution.
