Download or read book Elastoplastic Modeling written by Jean Salencon and published by John Wiley & Sons. This book was released on 2020-07-16 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundations of Elastoplasticity Subloading Surface Model written by Koichi Hashiguchi and published by Springer Nature. This book was released on 2023-06-12 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the standard text book for elastoplasticity/viscoplasticity which is explained comprehensively covering the rate-independent to -dependent finite deformations of metals, soils, polymers, crystal plasticity, etc. and the friction phenomenon. Concise explanations on vector-tensor analysis and continuum mechanics are provided first, covering the underlying physical concepts, e.g. various time-derivatives, pull-back and push-forward operations, work-conjugacy and multiplicative decomposition of deformation gradient tensor. Then, the rigorous elastoplastic/viscoplastic model, called the subloading surface model, is explained comprehensively, which is based on the subloading surface concept to describe the continuous development of the plastic/viscoplastic strain rate as the stress approaches to the yield surface, while it can never be described by the other plasticity models, e.g. the Chaboche-Ohno and the Dafalias-Yoshida models assuming the purely-elastic domain. The main features of the subloading surface model are as follows: 1) The subloading surface concept underling the cyclic plasticity is introduced, which insists that the plastic deformation develops as the stress approaches the yield surface. Thus, the smooth elastic-plastic transition leading to the continuous variation of the tangent stiffness modulus is described always. 2) The subloading-overstress model is formulated by which the elastoplastic deformation during the quasi-static loading and the viscoplastic deformation during the dynamic and impact loading can be described by the unified equation. Then, only this model can be used to describe the deformation in the general rate of deformation, disusing the elastoplastic constitutive equation. 3) The hyperelastic-based (visco)plasticity based on the multiplicative decomposition of deformation gradient tensor and the subloading surface model is formulated for the exact descriptions of the finite elastic and (visco)plastic deformations. 4) The subloading-friction model is formulated for the exact description of the dry and the fluid (lubricated) frictions at the general rate of sliding from the static to the impact sliding. Thus, all the elastic and inelastic deformation/sliding phenomena of solids can be described accurately in the unified equation by the subloading-overstress model. The subloading surface model will be engraved as the governing law of irreversible deformation of solids in the history of solid mechanics.
Download or read book Constitutive Modeling of Soils and Rocks written by Pierre-Yves Hicher and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a comprehensive overview of elastoplasticity relating to soil and rocks. Following a general outline of the models of behavior and their internal structure, each chapter develops a different area of this subject relating to the author's particular expertise. The first half of the book concentrates on the elastoplasticity of soft soils and rocks, while the second half examines that of hard soils and rocks.
Download or read book Elastoplasticity Theory written by Koichi Hashiguchi and published by Springer Science & Business Media. This book was released on 2009-05-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents Recent advancements in the performance of industrial products and structures are quite intense. Consequently, mechanical design of high accuracy is necessary to enhance their mechanical performance, strength and durability. The basis for their mechanical design can be provided through elastoplastic deformation analyses. For that reason, industrial engineers in the fields of mechanical, civil, architec- ral, aerospace engineering, etc. must learn pertinent knowledge relevant to elas- plasticity. Numerous books about elastoplasticity have been published since “Mathema- cal Theory of Plasticity”, the notable book of R. Hill (1950), was written in the middle of the last century. That and similar books mainly address conventional plasticity models on the premise that the interior of a yield surface is an elastic domain. However, conventional plasticity models are applicable to the prediction of monotonic loading behavior, but are inapplicable to prediction of deformation behavior of machinery subjected to cyclic loading and civil or architectural str- tures subjected to earthquakes. Elastoplasticity has developed to predict defor- tion behavior under cyclic loading and non-proportional loading and to describe nonlocal, finite and rate-dependent deformation behavior.
Download or read book Elastic Plastic and Yield Design of Reinforced Structures written by Patrick De Buhan and published by Elsevier. This book was released on 2017-07-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastic, Plastic and Yield Design of Reinforced Structures presents a whole set of new results which have been published by the authors over the last 30 years in the field of continuum solid mechanics applied to the analysis and design of reinforced civil engineering structures. The focus is on the development and application of up-scaling/homogenization methods in the design of such composite structures, with a special emphasis on the plastic behavior and ultimate strength of materials. The specificity of the book is highlighted by at least two completely innovative concepts which lie at the very heart of the book's originality: the elaboration of a fully comprehensive homogenization-based method for the design of reinforced structures (and not only materials), through the study of macroscopic behavior, and the development of a multiphase model for materials reinforced by linear inclusions, which considerably extends the range of applicability of the classical homogenization procedure. - Sums up almost thirty years of original research in the field of mechanics applied to the analysis and design of reinforced civil engineering structures - Focuses on the application of upscaling/homogenization methods to the design of civil engineering structures - Highlights the elaboration of a fully comprehensive homogenization-based method for the design of reinforced structures (and not only materials), through the concept of macroscopic behavior - Features development of a multiphase model for materials reinforced by linear inclusions, which considerably extends the range of applicability of the classical homogenization procedure.
Download or read book Mechanical Behavior of Concrete written by Jean-Michel Torrenti and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title provides a comprehensive overview of all aspects of the mechanical behavior of concrete, including such features as its elastoplasticity, its compressive and tensile strength, its behavior over time (including creep and shrinkage, cracking and fatigue) as well as modeling techniques and its response to various stimuli. As such, it will be required reading for anyone wishing to increase their knowledge in this area.
Download or read book Geomechanics from Micro to Macro written by Kenichi Soga and published by CRC Press. This book was released on 2014-08-26 with total page 1668 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics from Micro to Macro contains 268 papers presented at the International Symposium on Geomechanics from Micro and Macro (IS-Cambridge, UK, 1-3 September 2014). The symposium created a forum for the dissemination of new advances in the micro-macro relations of geomaterial behaviour and its modelling. The papers on experimental investigati
Download or read book Advances in Computer Graphics written by Marina Gavrilova and published by Springer. This book was released on 2019-06-11 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 36th Computer Graphics International Conference, CGI 2019, held in Calgary, AB, Canada, in June 2019. The 30 revised full papers presented together with 28 short papers were carefully reviewed and selected from 231 submissions. The papers address topics such as: 3D reconstruction and rendering, virtual reality and augmented reality, computer animation, geometric modelling, geometric computing, shape and surface modelling, visual analytics, image processing, pattern recognition, motion planning, gait and activity biometric recognition, machine learning for graphics and applications in security, smart electronics, autonomous navigation systems, robotics, geographical information systems, and medicine and art.
Download or read book Constitutive Modeling of Geomaterials written by Teruo Nakai and published by CRC Press. This book was released on 2012-07-23 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a veteran geotechnical engineer with a long record of research discoveries, Constitutive Modeling of Geomaterials: Principles and Applications presents a simple and unified approach to modeling various features of geomaterials in general stress systems. The book discusses the fundamentals of the constitutive modeling of soils and illustrates the application of these models to boundary value problems. Helping readers easily understand the fundamentals and modeling of soil behaviors, the author first explains the ideas and formulations for modeling soil features in one-dimensional conditions. He then extends the one-dimensional models to three-dimensional models using the tij concept. The text covers the subloading tij model and other methods that describe density, bonding, time effect, and more. Moving on to the practical application of the constitutive models, the author presents the numerical simulations of typical geotechnical problems (numerical modeling) and the corresponding model tests (physical modeling). Using a framework that leads to a unified set of material parameters, this book shows how to formulate a constitutive model capable of simulating the main features of soil behavior. It not only covers recent methods and models but also uses real test data to prove their reliability.
Download or read book Numerical Modeling of Soil Constitutive Relationship written by Qingyang Ren and published by Springer Nature. This book was released on 2021-09-01 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book adopts numerical method to model soil constitutive relationship while it abandons the traditional idea of looking for plastic potential as the only way to model. Firstly, the triaxial compression tests of expansive soil, sand and clay under different stress paths are introduced; then the elastoplastic constitutive equations of expansive soil, sand and clay under various stress paths are established by numerical modeling method; finally, the constitutive equations are embedded in the finite element program and verified by comparing the finite element calculation results of the triaxial test soil samples with the corresponding test results. The modeling obtains high accuracy.
Download or read book Practice of Constitutive Modelling for Saturated Soils written by Zhen-Yu Yin and published by Springer Nature. This book was released on 2020-09-11 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the development of a constitutive modeling platform for soil testing, which is one of the key components in geomechanics and geotechnics. It discusses the fundamentals of the constitutive modeling of soils and illustrates the use of these models to simulate various laboratory tests. To help readers understand the fundamentals and modeling of soil behaviors, it first introduces the general stress–strain relationship of soils and the principles and modeling approaches of various laboratory tests, before examining the ideas and formulations of constitutive models of soils. Moving on to the application of constitutive models, it presents a modeling platform with a practical, simple interface, which includes various kinds of tests and constitutive models ranging from clay to sand, that is used for simulating most kinds of laboratory tests. The book is intended for undergraduate and graduate-level teaching in soil mechanics and geotechnical engineering and other related engineering specialties. Thanks to the inclusion of real-world applications, it is also of use to industry practitioners, opening the door to advanced courses on modeling within the industrial engineering and operations research fields.
Download or read book Advances in Bifurcation and Degradation in Geomaterials written by Stéphane Bonelli and published by Springer Science & Business Media. This book was released on 2011-08-03 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions to the 9th International Workshop on Bifurcation and Degradation in Geomaterials held in Porquerolles, France, May 23-26, 2011. This series of conferences, started in the early 1980s, is dedicated to the research on degradation and instability phenomena in geomaterials. The volume gathers a series of manuscripts by brilliant international scholars reflecting recent trends in theoretical and experimental research in geomechanics. It incorporates contributions on topics like instability analysis, localized and diffuse failure description, multi-scale modeling and applications to geo-environmental issues. This book will be valuable for anyone interested in the research on degradation and instabilities in geomechanics and geotechnical engineering, appealing to graduate students, researchers and engineers alike.
Download or read book Modeling of Inelastic Behavior of RC Structures Under Seismic Loads written by P. Benson Shing and published by ASCE Publications. This book was released on 2001-01-01 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the U.S.?Japan Seminar on Post-Peak Behavior of Reinforced Concrete Structures Subjected to Seismic Loads: Recent Advances and Challenges on Analysis and Design, held in Tokyo and Lake Yamanaka, Japan, October 25-29, 1999. Sponsored by the National Science Foundation, U.S.A.; Japan Society for the Promotion of Science; Japan Concrete Institute. This collection presents the latest ideas and findings on the inelastic behavior of reinforced concrete (RC) structures from the analysis and design standpoints. These papers discuss state-of-the-art concrete material models and analysis methods that can be used to simulate and understand the inelastic behavior of RC structures, as well as design issues that can improve the seismic performance of these structures. Topics include modeling of concrete behavior; modeling of RC structures (finite element approach and macro-element approach); and experimental studies, analysis, and design issues.
Download or read book Uncertainty Modeling and Decision Making in Geotechnics written by Kok-Kwang Phoon and published by CRC Press. This book was released on 2023-12-11 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainty, Modeling, and Decision Making in Geotechnics shows how uncertainty quantification and numerical modeling can complement each other to enhance decision-making in geotechnical practice, filling a critical gap in guiding practitioners to address uncertainties directly. The book helps practitioners acquire a working knowledge of geotechnical risk and reliability methods and guides them to use these methods wisely in conjunction with data and numerical modeling. In particular, it provides guidance on the selection of realistic statistics and a cost-effective, accessible method to address different design objectives, and for different problem settings, and illustrates the value of this to decision-making using realistic examples. Bringing together statistical characterization, reliability analysis, reliability-based design, probabilistic inverse analysis, and physical insights drawn from case studies, this reference guide from an international team of experts offers an excellent resource for state-of-the-practice uncertainty-informed geotechnical design for specialist practitioners and the research community.
Download or read book Unsaturated Soils Research Applications written by Nasser Khalili and published by CRC Press. This book was released on 2014-06-05 with total page 1872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Soils: Research and Applications contains 247 papers presented at 6th International Conference on Unsaturated Soils (UNSAT2014, Sydney, Australia, 2-4 July 2014). The two volumes provide an overview of recent experimental and theoretical advances in a wide variety of topics related to unsaturated soil mechanics:- Unsaturated Soil Behavi
Download or read book The SMP Concept Based 3D Constitutive Models for Geomaterials written by Hajime Matsuoka and published by CRC Press. This book was released on 2014-04-21 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cam-Clay model is a fundamental constitutive model in soil mechanics, but is only suitable for normally consolidated clay under triaxial compression stress states. This book introduces the SMP criterion, its integration with the well-known Cam-clay model, and its application to the general eleastoplastic constitutive models for geomaterials like clay, sand and unsaturated soil.
Download or read book Transactions on Computational Science XXXVII written by Marina L. Gavrilova and published by Springer Nature. This book was released on 2020-07-13 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LNCS journal Transactions on Computational Science reflects recent developments in the field of Computational Science, conceiving the field not as a mere ancillary science but rather as an innovative approach supporting many other scientific disciplines. The journal focuses on original high-quality research in the realm of computational science in parallel and distributed environments, encompassing the facilitating theoretical foundations and the applications of large-scale computations and massive data processing. It addresses researchers and practitioners in areas ranging from aerospace to biochemistry, from electronics to geosciences, from mathematics to software architecture, presenting verifiable computational methods, findings, and solutions, and enabling industrial users to apply techniques of leading-edge, large-scale, high performance computational methods.This, the 37th issue of the Transactions on Computational Science, is devoted to the area of Computer Graphics. The 9 papers included in the volume constitute extended versions of selected papers presented at the 36th Computer Graphics International Conference, CGI 2019. Topics covered include virtual reality, augmented reality, image retrieval, animation of elastoplastic material, and visualization of 360°HDR images.
